So I decided to buy an xbox 360/pc controller


Recommended Posts

The design is really nice, perfectly made for my hands and so far all my other friends that have tested it,have liked it. Gaming so far isn't to bad... i'll try and make a good review soon and post some pics (im sure u all know what it looks like though)

anyway, heres a crappy picture of it for now...I'll be testing quite a bit of games out hopefully.

Edited by Meshuggah

Hmmm, don't know why I didn't think about talking about that. That's what sucks. The install disc is only 43.6mb and is full of EULA's for all the countries and readme's. Then you have the drivers that it installs, but there is no special software. You have to go to the control panel, game controllers :/

both...not much configuration...no support so far for COD 2. which is really disappointing since it's going to come out for xbox 360....i kind of wanted to have a semi 360 experience today, but im using keyboard/mouse...oh well...at least i can turn up the graphics reasonably well

720p, extra on all settings, 2x anti aliaising, runs pretty smooth

::: doesnt work on ut2004 either

Edited by Meshuggah
both...not much configuration...no support so far for COD 2. which is really disappointing since it's going to come out for xbox 360....i kind of wanted to have a semi 360 experience today, but im using keyboard/mouse...oh well...at least i can turn up the graphics reasonably well

720p, extra on all settings, 2x anti aliaising, runs pretty smooth

::: doesnt work on ut2004 either

586737827[/snapback]

You're joking right? I have a similar system as you except mine has a 6800GT and it does not run smooth with extra settings + 2x AA.. You must have a better card then a 9700 ATI. Do you have a 7800 or X1800 Series card?

Also even if you manage to get the x360 controller to work with Call of Duty 2 you aren't going to have the same experience as with the Xbox360 version. It was built for control with that controller rather then a mouse/PC combo so things have been changed quite a bit.

You're joking right?  I have a similar system as you except mine has a 6800GT and it does not run smooth with extra settings + 2x AA..  You must have a better card then a 9700 ATI.  Do you have a 7800 or X1800 Series card?

Also even if you manage to get the x360 controller to work with Call of Duty 2 you aren't going to have the same experience as with the Xbox360 version.  It was built for control with that controller rather then a mouse/PC combo so things have been changed quite a bit.

586737874[/snapback]

The game runs like crap on nVidia cards. That's pretty well documented at this point.

Games not supported by Xbox 360 Controller:

Unreal Tournament 2004

Call Of Duty 2

F.E.A.R.

Age Of Empires III (obviously)

Quake 4

Battlefield 2

Doom 3 and Doom 3 Expansion

Halo

Farcry

Games Supported so far:

Moto GP3

that's really all I can test. microsoft/modder needs to make some sort of program so we can define each key as an actual button in the keyboard,sort of like my Nyko Fan controller. Definatly not looking good for the whole xbox 360/pc thing so far... I might even return it and just wait to buy the console...it's not even wireless now that I'm thinking about it

http://hardware.gamespot.com/Story-ST-23353-2687-x-x-x

gamespot review of 360-PC controller...

Microsoft didn't ship a fancy driver interface with the controller. But once we dug in to the control panel and clicked on the game controller icon, we found a few Xbox 360 controller utilities. Through the software, we were able to test all the buttons as well as calibrate the controller. The calibration software clearly demonstrated deficiencies in the controller. We tried to achieve a proper 50/50 calibration, but it proved rather difficult, as the analog sticks rarely float back to center when released.  (This is true, happens to me)

We tried out the controller on a few games to see how it performed. With Psychonauts, it took a little bit of effort, but we had the usual Xbox controls mapped to the controller within minutes. At that point, aside from the vastly improved graphics, we found it hard to tell the difference between the PC version and the Xbox one. Then we moved on to Juiced, a racing game, where steering with the controller's analog sticks felt quite sloppy, regardless of calibration. Oddly, steering with them in Moto GP3 turned out just fine. And as expected, other games, like The Suffering, had no gamepad support at all. For giggles, we also tried out Counter-Strike: Source. We could map a few of the controls, but certain controls, like strafing, simply cannot be mapped to the analog sticks.

We're pleased with how the Xbox 360 controller functions on the PC, considering no one's really paid much attention to gamepads on the PC for years. However, with the almost guaranteed ubiquity of the Xbox 360 controller, we're sure to see more--and better--support for gamepads in the future.

I have the xbox360PC controller as well (jsut got it from bestbuy)

I just posted a question about the controler in the hardware section. But, my problem is the same as the above review:

We tried to achieve a proper 50/50 calibration, but it proved rather difficult, as the analog sticks rarely float back to center when released

This is 100% true. Xbox probably has a built in "dead-zone" so this isn't an issue. I hope that Microsoft releases a good set of drivers, that allow you to enter a dead-zone in.

I have been using this for battlefield 2 (for flying). It is frustrating that the controller doesn't fully return to center. :angry:

Games not supported by Xbox 360 Controller:

Unreal Tournament 2004

Call Of Duty 2

F.E.A.R.

Age Of Empires III (obviously)

Quake 4

Battlefield 2

Doom 3 and Doom 3 Expansion

Halo

Farcry

Games Supported so far:

Moto GP3

that's really all I can test. microsoft/modder needs to make some sort of program so we can define each key as an actual button in the keyboard,sort of like my Nyko Fan controller. Definatly not looking good for the whole xbox 360/pc thing so far... I might even return it and just wait to buy the console...it's not even wireless now that I'm thinking about it

586737952[/snapback]

really no offense, but why would any one to play FPS with a gamepad?

really no offense, but why would any one to play FPS with a gamepad?

Guess what?

Not everyone who plays FPS games on PC's uses only the keyboard and mouse to play. You know there are people in the world who prefer controllers for them. Me being one of them. I can play both ways but I'm better using the controllers.

Guess what?

Not everyone who plays FPS games on PC's uses only the keyboard and mouse to play. You know there are people in the world who prefer controllers for them. Me being one of them. I can play both ways but I'm better using the controllers.

586798662[/snapback]

thats like driving a car with a joystick, and flying a plane with steering wheel

every controller has a purpose, and I'm sorry but gamepad purpose is not to be used for FPS games.

I have the xbox360PC controller as well (jsut got it from bestbuy)

I just posted a question about the controler in the hardware section.  But, my problem is the same as the above review:

This is 100% true.  Xbox probably has a built in "dead-zone" so this isn't an issue.  I hope that Microsoft releases a good set of drivers, that allow you to enter a dead-zone in.

I have been using this for battlefield 2 (for flying).  It is frustrating that the controller doesn't fully return to center.  :angry:

586773233[/snapback]

I bet they'll have updated drivers online to fix that :)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Who is paying for this 30x scale-up? Its sounds expensive.
    • Millions of users to benefit from Windows 11's new performance boost on Adobe Photoshop by Sayan Sen Despite the advent of AI-generated imagery, Adobe's Photoshop remains one of the most popular tools on this planet. Adobe does not have a publicly reported total user count but it's probably not wrong to assume there are millions. As of 2025, Adobe Creative Cloud has had approximately 41 million paid subscribers, many of whom likely use Photoshop. In addition, more than 166,000 companies worldwide are apparently also using the app. These figures are according to a very recent report by SQ Magazine. Out of them, it is fair to assume that many are probably running Windows. As such, there is good news for these users as Microsoft has announced Photoshop is getting a big 20% performance boost on x86-64 (AMD64) systems and a 13% bump-up on Arm devices. This is definitely great news for them as many have complained about the slow performance and general sluggishness of Photoshop on Windows 11 ever since the advent of the latter back in 2021. If you are wondering how Microsoft managed to do this, the answer lies in a combination of compiler-level optimizations and a technology called Sample Profile Guided Optimization (SPGO). According to Microsoft, Adobe worked closely with the company’s Visual C++ team and adopted the latest MSVC toolchain enhancements together with SPGO to squeeze more performance out of Photoshop’s CPU-bound workloads. Unlike traditional Profile Guided Optimization (PGO), which requires developers to create special instrumented builds and run lengthy training workloads, SPGO gathers performance data directly from optimized release binaries. This means Adobe could collect real-world usage information which gives a major advantage to this technique, as companies could leverage data collected from actual customer workloads rather than only relying on synthetic benchmark runs. In theory, this should allow optimizations to better reflect how users interact with software in the real world. Thanks to this, there are improvements to code layout, function inlining, hot-and-cold code separation, and other low-level tweaks that help processors execute instructions more efficiently. Essentially the compiler is better able to identify “hot” code paths, those which are most frequently executed, and optimize them accordingly.
    • "The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months¨ I'd prefer to see the lowest price in over a year
    • Glad these prices are starting to come down, but that is still crazy. I bought the 2TB 9100 Pro (slightly more expensive version with PCIe 5.0) last year for $240.
    • The 2TB Samsung 990 PRO NVMe SSD hits lowest price in over three months by Sayan Sen Yesterday, we covered a really good deal wherein you can get a 4TB TeamGroup T-FORCE G50 NVMe PCIe Gen4 SSD for a low price of just $400 with a special discount coupon. That's just $100 per TB, making it a very good offer during these hard times. The deal is still live, so you can check it out in its dedicated article here if you do not want to miss out. Meanwhile, if you don't have that kind of budget but still wish to buy an SSD for a good price, the 2TB variant of the TeamGroup SSD at $280 its lowest price in over three months. Meanwhile, those seeking 2TB but faster performance can check out Samsung's 990 PRO, which has hit the lowest price also in the last quarter or so, as it's on sale for $370 (purchase links under the specs table down below). Thus, you want a faster drive, get the 990 Pro, or you want more capacity, grab the TeamGroup 4TB linked in the first para. The 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification TeamGroup T-FORCE G50 2TB Samsung 990 PRO 2TB Interface PCIe 4.0 x4, NVMe 1.4 PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 M.2 2280 Controller InnoGrit Controller Samsung In-house Controller NAND Flash 3D TLC 3D TLC DRAM Cache None (HMB supported) 2GB LPDDR4 Sequential Read (Max) 5,000 MB/s 7,450 MB/s Sequential Write (Max) 4,500 MB/s 6,900 MB/s Random Read (4K) Up to 600,000 IOPS Up to 1,400,000 IOPS Random Write (4K) Up to 700,000 IOPS Up to 1,550,000 IOPS TBW (Endurance) 1,300 TBW 1,200 TBW MTBF 3,000,000 hours 1,500,000 hours Operating Temperature 0°C to 70°C 0°C to 70°C Storage Temperature -40°C to 85°C -40°C to 85°C Shock Resistance 1,500G / 0.5ms 1,500G / 0.5ms Heatsink Patented Graphene Heat Spreader No Get them at the links below: Samsung 990 PRO SSD 2TB (MZ-V9P2T0B/AM): $369.99 (Sold and Shipped by Amazon US) TEAMGROUP T-Force G50 2TB SSD (TM8FFE002T0C129): $279.99 (Sold by TeamGroup, Shipped by Amazon US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
    • Week One Done
      Prasann earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      522
    2. 2
      +Edouard
      174
    3. 3
      PsYcHoKiLLa
      90
    4. 4
      Steven P.
      81
    5. 5
      ATLien_0
      70
  • Tell a friend

    Love Neowin? Tell a friend!