The Best Security/Cleaners For XP Service Pack 2


Recommended Posts

Here's the list, its what I use, most of its free, feel free to comment, I recommend also you should update your PC generally with Windows Update (http://windowsupdate.microsoft.com) and have Service Pack 2 installed - far better:

The set of tools that I use:

Antivirus:

eTrust EZ Antivirus

Powerful antivirus that uses very little ram, but is still highly efficient.

http://www.my-etrust.com/microsoft/

Firewall:

Outpost Free

Sorts out many things automatically for you, and is much more configurative than other firewalls.

http://www.agnitum.com/products/outpostfree/index.php

On-Demand Anti-Spyware:

Spybot - Search & Destroy

Gets rid of the most simple (but most harmful in some cases) of spywrae. Be careful what you delete though, it does list things that aren't considered to be spyware, such as toolbars e.c.t.

http://www.spybot.info

Ad-Aware SE Personal

Very good, sometimes lists things other things don't, simple inter-face.

http://www.lavasoft.com/support/download

CWShredder

Concentrates on deleteing the wide variety of CWS (Cool Web Search) spyware, very small application.

http://www.trendmicro.com/cwshredder/

Ewido

Picks up many things that spyware programs can't, as well as some viruses.

http://www.ewido.com

Microsoft AntiSpyware

Microsoft's Official AntiSpyware, very powerful and a must have.

http://www.microsoft.com/athome/security/s...re/default.mspx

Spyware Blaster

Stop spyware and adware from being downloaded in the first place. Just be sure to keep it up dated and to always click block all know issues after updating.

http://www.javacoolsoftware.com/spywareblaster.html

Registry Cleaners/Tuners:

Registry First Aid

Very [powerful but extremely safe to use unlike other registry cleaners, thisfind sonly things worth deleting and won't screw up your system - it will just make it better!

http://www.rosecitysoftware.com/reg1aid/

RegSeeker

A powerful registry searching program, doen't clean things as such, but good for tech's.

http://www.hoverdesk.net/freeware.htm

RegCompact.NET

"This program will help you increase the speed of your WindowsXP system by optimizing the system's registry hives. These hives are files on your system that Windows stores program settings and other system information in. They are crucial to the operation of your computer's operating system and the speed at which they can be accessed will effect system and program performance."

http://www.experimentalscene.com/?type=1&id=regcompact

Disk Cleaners:

CCleaner

Perfect in every way shape and form, also cleans up the registry.

http://www.ccleaner.com

As you can see, this isn't the full list of freebies, its stuff that I have come down to after a looooonnnnng period of time, for general FREE progams that I use look here:

https://www.neowin.net/forum/index.php?showtopic=412579

Anyway, have a look, and also feel free to ask me for addititional advice. :yes:

The_Best_Security_and_Cleaners_For_XP_Service_Pack_2.txt

Edited by Non Stop
What exactly does Disk Cleanup compress? I never allow it to compress old files because I don't know *exactly* what it does.

Just compress's built in files in your PC that you don't (or more likely can't) view. It won't cause any damage to your PC at all, I promise, only make it better.

As I said above; MSAS is exluded for the moment due to their dealings with spyware companys.

Edited by Non Stop

Dustbuster

I'm surprised more people haven't heard of this. It scans and deletes all the useless files installed by XP and SP2. Easily delete 400mb's to 600mb's of useless crap from a fresh install of XP. I use this everytime I have to fix someones computer. Works very fast.

Link I'm posting is on the Major Geeks website because the authors site is being re-designed right now I believe.

Dustbuster 2.8.2 Build 400

and

NOD32 Antivirus by Eset

There's more to CCleaner than just disk cleaning, it has a registry and file integrity cleaner/fixer as well which never caused me any problems. It does even a better job than TweakNow RegCleaner Pro which I also use every once in a while.

The last one caused me big problems when I tried to use the registry defragmenter (what a POS!).

As for anti virus: Avast! (despite the quite frequent false positives)

Realtime anti spy/adware: SpywareBlaster.

I also use FireFox so I dont get any bad stuff really, every weekend I run an Ad-Aware and Spybot S&E scan just to be sure but all I get is a cookie every now and then.

Firewall: my trusted d-link router :D

The best Antivirus on the market is NOD32. The free ones like Avast and AVG do not compare. Pay the $$ and be assured that your getting the best. Norton AV is big, bloated and doesnt' find everything that NOD32 does.

http://www.eset.com/home/home.htm

Software firewall sucks because it takes up resources. Get a router. That combined with windows firewall (usually not necessary if behind a router and in a small/home network of computers ) should be sufficient.

Don't use microsoft antispyware it suxors.

You can delete all those links to Spybot, Adaware, CWShredder and just put a link to Hitman Pro which will run all those programs automatically for you. It is much easier than installing them separate and having to hassle with them.

http://www.hitmanpro.nl/

You can delete all those links to Spybot, Adaware, CWShredder and just put a link to Hitman Pro which will run all those programs automatically for you. It is much easier than installing them separate and having to hassle with them.

http://www.hitmanpro.nl/

586843422[/snapback]

is there an english translation for this site? would like to understand more about it.

sb.gifSpywareBlaster (Freeware and Free Updates)

Prevents the installation of spyware and other potentially unwanted software. A must for persons' who have Microsoft Internet Explorer as their default browser.

Software firewall sucks because it takes up resources. Get a router. That combined with windows firewall (usually not necessary if behind a router and in a small/home network of computers ) should be sufficient.

can i just point out that home hardware firewalls (inc. routers) should not be used as a replacement for a software firewall. corporate built ones with fully fledged ACL's (access control lists) might be a different matter, im not sure.

hardware firewalls can be extremely good at filtering and blocking unwanted network traffic. however, you cant control what software on your computer can establish network connections.

this means, if you get infected with a trojan, there is nothing to stop it phoning home and establishing a connection to the cracker who created it, providing direct access right through your hardware firewall into your computer.

heres an analogy:

think of your computer as a night club. a hardware firewall is like a brick wall, physically stopping you getting in via any way other than the door, but if you use the door (the correct entry method, or acceptable network traffic) theres nothing stopping you.

however, you could add a bouncer (software firewall). he will check your name on a list and see if your allowed through !!!

note, there actually slightly stronger than they sound - most use SPI technology which means only network traffic thats part of a connection established by your computer is allowed through 'the door'. however that doesnt help at all against that trojan - the trojan is establishing the connection from within your computer, so its allowed through! a software firewall would block the trojan unless its on its allow list.

These area all solid products for sure. They do everything that is needed and more. I didn't create this thread for an argument, but just to let you know what is the best that I have come down to, and what is needed.

EDIT:

Added MSAS to the list, the new version of MSAS is better than before, and considering many Anti-Spyware companys work with Spyware companys, then I do not think it should be excluded. Still kept as On-Demand Scanner though, Arovax does so much more.

Edited by Non Stop
Just compress's built in files in your PC that you don't (or more likely can't) view. It won't cause any damage to your PC at all, I promise, only make it better.

586843032[/snapback]

Which files? I don't doubt that it won't cause damage, but I want (actually, it's almost a need) to know how it determines which files it compresses. I want to know exactly what happens on my computer :p

Dustbuster

I'm surprised more people haven't heard of this. It scans and deletes all the useless files installed by XP and SP2. Easily delete 400mb's to 600mb's of useless crap from a fresh install of XP. I use this everytime I have to fix someones computer. Works very fast.

Dustbuster is horrible. It does not tell you what it is deleting, it only deletes a lot on the first run and it deletes files that windows actually NEEDS if you ever want to install a feature you don't already have. I don't recommend this at all, horrible program. If you really want to cut down what you install with xp, try nlite.

can i just point out that home hardware firewalls (inc. routers) should not be used as a replacement for a software firewall. corporate built ones with fully fledged ACL's (access control lists) might be a different matter, im not sure.

hardware firewalls can be extremely good at filtering and blocking unwanted network traffic. however, you cant control what software on your computer can establish network connections.

this means, if you get infected with a trojan, there is nothing to stop it phoning home and establishing a connection to the cracker who created it, providing direct access right through your hardware firewall into your computer.

heres an analogy:

think of your computer as a night club. a hardware firewall is like a brick wall, physically stopping you getting in via any way other than the door, but if you use the door (the correct entry method, or acceptable network traffic) theres nothing stopping you.

however, you could add a bouncer (software firewall). he will check your name on a list and see if your allowed through !!!

note, there actually slightly stronger than they sound - most use SPI technology which means only network traffic thats part of a connection established by your computer is allowed through 'the door'. however that doesnt help at all against that trojan - the trojan is establishing the connection from within your computer, so its allowed through! a software firewall would block the trojan unless its on its allow list.

586843851[/snapback]

A proper av + winpatrol can stop a trojan from coming in, no problem. Software firewalls are really overrated if you have a router.

^ software firewalls are not over rated. you need control over outbound connections, and its by far the best way to go.

fully up-to-date anti-malware software may prevent most malicious software infecting your system and establishing a connection, but it can only protect against known threats and then only those for which there are detection and removal definitions.

if you were infected with a new form of malware, or ran software that unknowingly was programmed or modified to create a malicious connection, your hardware firewall and anti-malware software will just sit there and do nothing.

a software firewall would imediately intercept and block the connection.

a hardware firewall and anti-malware software are in no way an alternative to a software firewall.

^ software firewalls are not over rated. you need control over outbound connections, and its by far the best way to go.

fully up-to-date anti-malware software may prevent most malicious software infecting your system and establishing a connection, but it can only protect against known threats and then only those for which there are detection and removal definitions.

if you were infected with a new form of malware, or ran software that unknowingly was programmed or modified to create a malicious connection, your hardware firewall and anti-malware software will just sit there and do nothing.

a software firewall would imediately intercept and block the connection.

a hardware firewall and anti-malware software are in no way an alternative to a software firewall.

586846157[/snapback]

You obviously don't know how winpatrol works then. It detects any unwanted changes that almost every single virus/trojan/malware etc. does to your computer and STOPS it from making the change, prompting the user if the user wants to allow the change. It does not tell you the virus name or whatever, just the file name. It does not work from definitions...

Therefore you don't even get the threat in the first place and the firewall is not needed to stop the connections. >firewalls are overrated.

^ well no i actually dont know what winpatrol does, ive never looked at it. if it can do what you say then that reduces the need for a software firewall a little, but not totally. you say it stops changes being made to the system which is all well and good, but its still not going to stop outward bound connections...

^ well no i actually dont know what winpatrol does, ive never looked at it. if it can do what you say then that reduces the need for a software firewall a little, but not totally. you say it stops changes being made to the system which is all well and good, but its still not going to stop outward bound connections...

586850241[/snapback]

but you won't get the thing that does outward bound connections in the first place...

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Rockstar gives last-gen GTA V players free upgrades tomorrow by Pulasthi Ariyasinghe Rockstar is preparing to launch Grand Theft Auto VI later this year, but ahead of that, the company has revealed a new offer for some Grand Theft Auto V owners. It today announced that Xbox One and PlayStation 4 version owners of the 2013-released title will soon be receiving a free upgrade to the current generation version. The studio released the Xbox Series X|S and PlayStation 5 version of Grand Theft Auto V back in 2022, bringing significant upgrades to the original console editions. This included 60 FPS gameplay at up to 4K resolution, as well as major upgrades to textures, draw distance, and audio. Faster load times, ray tracing elements, and HDR support were also added with it. While this new and enhanced version needed a new purchase of the game to jump in, now Rockstar has decided to make it a free upgrade, dropping the $40 price tag entirely on consoles. "Beginning tomorrow, those who own any PS4 version or the digital Xbox One version of Grand Theft Auto V will be able to upgrade to the PS5 or Xbox Series X|S versions at no additional cost, and experience the best versions of GTA V and GTA Online," said the company in an official blog post. The free upgrade offer will be released tomorrow, June 18, for all Xbox One and PlayStation 4 owners of Grand Theft Auto V. Players who will be jumping in on the offer will want to check how to migrate their GTA Online profile from last-generation to current-generation consoles by heading over here. The offer lands ahead of The Kortz Center Heist hitting Grand Theft Auto Online, where players and crews will be tasked with stealing priceless international art from a prestigious gallery in Pacific Bluffs. It doesn't look like Rockstar plans to stop updating its previous game even with Grand Theft Auto VI being on the horizon. The latest title is slated to launch on November 19, 2026, across Xbox Series X|S and PlayStation 5.
    • Now comes with a money back guarantee instead of a replacement! Hah
    • Rufus 4.15.2391 Beta by Razvan Serea Rufus is a small utility that helps format and create bootable USB flash drives, such as USB keys/pendrives, memory sticks, etc. Despite its small size, Rufus provides everything you need! Oh, and Rufus is fast. For instance it's about twice as fast as UNetbootin, Universal USB Installer or Windows 7 USB download tool, on the creation of a Windows 7 USB installation drive from an ISO (with honorable mention to WiNToBootic for managing to keep up). It is also marginally faster on the creation of Linux bootable USBs from ISOs. A non-exhaustive list of Rufus supported ISOs is available here. It can be especially useful for cases where: you need to create USB installation media from bootable ISOs (Windows, Linux, UEFI, etc.) you need to work on a system that doesn't have an OS installed you need to flash a BIOS or other firmware from DOS you want to run a low-level utility Rufus 4.15.2391 Beta changelog: Improve the guards for using the "silent" option Improve the ability to cancel during write retries Fix unrestricted XML entity expansion and integer overflow in ezxml parser (courtesy of @esadowski4) [GHSA-55r2-34wg-8mv9] Fix "silent" Windows installation failing at 75% in most cases [#2960] Fix a crash during boot when using UEFI:NTFS on Snapdragon X based ARM64 platforms [#2934] Fix the first WUE option always being checked by default [#2965] Fix an infinite loop when using Windows ISOs that contain multiple WIMs Fix "Enable runtime UEFI media validation" checkbox not always being properly enabled Other WUE improvements/fixes for OneDrive removal and username validation (with thanks to @christian8641) [#2984, #2991] Download: Rufus 4.15 Beta | 1.9 MB (Open Source) Links: Rufus Home Page | Project Page @GitHub | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Media Player Classic - Home Cinema 2.7.3 by Razvan Serea Media Player Classic - Home Cinema (MPC-HC) is a free and open-source video and audio player for Windows. MPC-HC is based on the original Guliverkli project (which is no longer maintained) and contains many additional features and bug fixes. As the continuation of the original Media Player Classic, MPC-HC isn’t flashy but it works with nearly any media format. MPC-HC uses DXVA technology to pass decoding operations to your modern video card, enhancing your viewing experience. And MPC-HC supports both physical and software DVDs with menus, chapter navigation, and subtitles. Overview of features A lot of people seem to be unaware of some of the awesome features that have been added to MPC-HC in the past years. Here is a list of useful options and features that everyone should know about: Dark interface Menu > View > Dark Theme When using dark theme it is also possible to change the height of the seekbar and size of the toolbar buttons. Options > Advanced Video preview on the seekbar Options > Tweaks > Show preview on seek bar Adjust playback speed Menu > Play > Playback rate The buttons in the player that control playback rate take a 2x step by default. This can be customized to smaller values (like 10%): Options > Playback > Speed step Adjusting playback speed works best with the internal audio renderer. This also has automatic pitch correction. Options > Playback > Output > Audio Renderer MPC-HC can remember playback position, so you can resume from that point later Options > Player > History You can quickly seek through a video with Ctrl + Mouse Scrollwheel. You can jump to next/previous file in a folder by pressing PageUp/PageDown. You can perform automatic actions at end of file. For example to go to next file or close player. Options > Playback > After Playback (permanent setting) Menu > Play > After Playback (for current file only) A-B repeat - You can loop a segment of a video. Press [ and ] to set start and stop markers. You can rotate/flip/mirror/stretch/zoom the video Menu > View > Pan&Scan This is also easily done with hotkeys (see below). There are lots of keyboard hotkeys and mouse actions to control the player. They can be customized as well. Options > Player > Keys Tip: there is a search box above the table. You can stream videos directly from Youtube and many other video websites You can stream videos directly from Youtube and many other video websites Put yt-dlp.exe or youtube-dl.exe in the MPC-HC installation folder. Then you can open website URLs in the player: Menu > File > Open File/URL You can even download those videos: Menu > File > Save a copy Tip: to be able to download in best quality with yt-dlp/youtube-dl, it is recommended to also put ffmpeg.exe in the MPC-HC folder. Several YDL configuration options are found here: Options > Advanced This includes an option to specify the location of the .exe in case you don't want to put it in MPC-HC folder. Play HDR video This requires using madVR or MPC Video Renderer. After installation these renderers can be selected here: Options > Playback > Output Ability to search for and download subtitles, either automatically or manually (press D): Options > Subtitles > Misc Besides all these (new) features, there have also been many bugfixes and internal improvements in the player in the past years that give better performance and stability. It also has updated internal codecs. Support was added for CUE sheets, WebVTT subtitles, etc. Media Player Classic - Home Cinema 2.7.3 changelog: Updated LAV Filters to version 0.82 Updated MPC Video Renderer to version 0.10.4.2550 Updated MPC Audio Renderer A few crash fixes, bug fixes and small improvements. Download: MPC-HC 2.7.3 (x64) | Standalone | ~20.0 MB (Open Source) Download: MPC-HC 2.7.3 (x86) | Standalone Links: MPC-HC Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Vincian earned a badge
      One Month Later
    • First Post
      Jocimo earned a badge
      First Post
    • Week One Done
      suprememobiles48 earned a badge
      Week One Done
    • One Month Later
      Windows Guy earned a badge
      One Month Later
    • One Month Later
      Prasann earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      172
    3. 3
      PsYcHoKiLLa
      89
    4. 4
      Steven P.
      76
    5. 5
      neufuse
      69
  • Tell a friend

    Love Neowin? Tell a friend!