V-2, V-4 do they exist?


Recommended Posts

i know there are V6, V8, V10...... V20 engines..

but do V2 and V4 engines exist? i've never heard of it or heard anyone talk about it, as far as i know, anything below 6 cylinders (for a car) is an inline4 engine (yes i know there's also inline6..but not the point)

my dad says there are many cars all over europe with V4 engines. if so, why aren't there any in the US?

Link to comment
https://www.neowin.net/forum/topic/405906-v-2-v-4-do-they-exist/
Share on other sites

Inlines last longer. And motorcycles might have a variation of a v2. I thought they were called twins, but we'll see.

i think you're right on that..

so it seems that they do exist, but now i need to find out why they don't sell/make/import them here.

There are 'V-2' in motorcycles, better known as twits. (Harley Davidson, Ducatis) and a few V-4s in motorcycles (Honda Interceptor is the only one I know of off the top of my head). Honda's RC211V MotoGP bike is a V-5.

But V-4s don't make enough power to justify the cost of mass producing them. You can get more power out of an inline 4 and with an inline 4 you only have to make 1 cylinder head and whatnot.

make sence?

nope..

i did some more research.. looks like Ford was still producing V4 engines until the late 80's.. they have these cargo vans, i don't know the model name, but they're running on V4 engines..

and they simply don't use them now since they are not reliable and very low in power.. a 1700cc V4 only produces about 68HP.. while an inline4 1700cc produces.. what? 130HP??

and just looking at pictures of a V4.. it just looks cheap and weak.. like an oversized lawn mower engine.

Piston configuration does not has as much to do with torque as displacement does. An inline-6 and a V-6 with similar displacement and similar amounts of technology will produce very similar torque numbers. Just for illustration purposes, I'll give some figures below.

BMW 3.0 I6: 220lb-ft

Honda 3.0 V6: 211lb-ft

Now for the SUV engine comparison...

GM 4.2 I6: 277lb-ft

Nissan 4.0 V6: 291lb-ft

But V-4s don't make enough power to justify the cost of mass producing them. You can get more power out of an inline 4 and with an inline 4 you only have to make 1 cylinder head and whatnot.

make sence?

Doesn't make sense to me at all...

Let's wind back to 1963 when 100bhp was a lot in a European family saloon.

Lancia (who produced the first V engines) had a V4 engine that in 1.1 form made 60bhp, and later 70bhp. That's pretty good for a modern 1.1 car, let alone a 40 year old one.

In 1.6 form it put out a very healthy 135bhp. That's a lot even today - 85bhp / litre.

So, V4's can put out as much power as an inline 4. (For comparison, the contemporary European (Ford) Lotus Cortina put out 105bhp from a 1.6, and it was classed as a performance car in it's day)

V2's are also known as V-Twins and are common in bikes.

V2 and V4 engines DO exist, my country is full of 'em :D almost all japan cars have a V4 engine (at least all 2000 and below). Why doesn't northamerica has? Dunno :pinch:

Unless Nissan, Toyota, Honda and the lot all engineered totally different engine lines for NA and Japan, you have I-4s also.

The reason there aren't (many) V-4s is that an inline cylinder engine is inherently smoother and more stable (and hence more reliable in the long run) than a V-configuration. So whenever, possible (read: whenever space permits), manufacturers use an inline engine. Most cars, however, don't have the space for an inline-6 unless it's very precisely engineered (BMW, Porsche), and they don't want to spend the money/time so they stick a V-6 in there. V-configurations -- and VW's new "W" configuration -- are all more compact than inlines.

So in short, given the space it's better to use an inline-cylinder engine. Which is why you always see inline-4s.

There is V4s but are now uncommon, They had them in old classic cars in the 1900 - 1960 really.

The reason why some cars use a V instead of an inline is to do with vibrations. Sometimes if there is space and you want alot of power a V would be better as it more balanced and stress on the engine isn't as high.

Small cars normaly have 3 cylinders family cars have 4 cylinders. 4x4 will normaly use both on differnt version. More powerful versions are normaly V6's

There is V4s but are now uncommon, They had them in old classic cars in the 1900 - 1960 really.

The reason why some cars use a V instead of an inline is to do with vibrations. Sometimes if there is space and you want alot of power a V would be better as it more balanced and stress on the engine isn't as high.

You're incorrect. Inline engines are smoother and with less vibration, but they take up more space than a V. BMW has used inline 6 engines for ages, as has Porsche, and now GM is starting to use them in some SUVs. They're generally better than V-6s, but as I said take more space and therefore require more careful engineering to package correctly.

Small cars normaly have 3 cylinders family cars have 4 cylinders. 4x4 will normaly use both on differnt version. More powerful versions are normaly V6's

That may be true for the UK/EU, but the original poster is from the US and we have almost no 3-cylinder cars (can't think of a single one that's still sold here, actually), and 4-cylinder cars are only the smallest of the small. Most family cars here are V6's. And there's not a whole lot of 4-cylinder SUVs here that anyone would actually buy. The least an SUV here needs is usually a 6, more commonly an 8. Not that I condone our buying habits, I'm just informing.

EDIT: for clarity, I should add that Porsche actually uses what some consider a variant of the inline, called the flat-6. The cylinders are horizontally opposed.

Edited by mrogers

I dont know why people are saying 4 cylinders are uncommon, there are plenty of them around.

The '90 something Corsica I drove was a 4 cylinder. So was my parents hunk of crap Taurus, and so is my dads Truck....4 cylinder truck.....why.....WHY?!

You're incorrect. Inline engines are smoother and with less vibration, but they take up more space than a V. BMW has used inline 6 engines for ages, as has Porsche, and now GM is starting to use them in some SUVs. They're generally better than V-6s, but as I said take more space and therefore require more careful engineering to package correctly.

EDIT: for clarity, I should add that Porsche actually uses what some consider a variant of the inline, called the flat-6. The cylinders are horizontally opposed.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

The only inline engines used by Porsche were in the 924, 944 and 968 inline-4's

I dont know why people are saying 4 cylinders are uncommon, there are plenty of them around.

The '90 something Corsica I drove was a 4 cylinder. So was my parents hunk of crap Taurus, and so is my dads Truck....4 cylinder truck.....why.....WHY?!

4-Cylinders are common... V4's aren't.

I've driven a ton of 4-Cylinders... each very different. I've had some very fast I4's that could run circles with other v6 cars and heavy cars that use v8's. Then I've had I4's that were sooo slow. Upsettingly slow. Right now I'm stuck with a fuel eating gas guzzler 3.5 v6.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

The only inline engines used by Porsche were in the 924, 944 and 968 inline-4's

the boxer shares similarities with both inline and v engines, the pistons crank in the same axis as a inline (albiet half do it the other way) but in the same way as a v engine they have separate cam gear and intake/exhaust.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

That's an interesting way of looking at it, but a flat 4 or 6 in not a V engine. That's like saying an inline 6 is a very narrow V6. A V is so named because the 2 banks of cylinders form a V shape when viewed from the front. A flat engine, also called a horizontally opposed engine is a different configuration, just like V engines and inline engines are different configurations.

I have a 1996 Ford Thunderbird with a V8 4.6L 240HP and a 1993 Thunderbird with a 3.8L V6 150HP and also an 2004 F-150 with a 4.6L V8 at 250HP My friend has SVT Mustang Cobra R with about 400HP (Now back on topic. I think the 2 Cyl would be in a Motorcycle it it resembles a V2 the V4 is in the Mini Cooper)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm not aware of this issue, but to help the other guys.  What version of Android are you using? Did you try a different browser? To see if Edge is the issue here.
    • I agree when are you going to read this (really poor BTW) article? Here is a better article so you actually know what is going on and answers questions you had in other comments --> https://arstechnica.com/gadgets/2026/05/speed-boosting-low-latency-profile-is-one-of-the-improvements-coming-to-windows-11/ It is unclear if one will be able to disable the new profile at this point but I am not seeing any reason why one would.
    • I disagree; they come off very "bitchy" and "whiny". Make a great product and combine that with a great price (free) and people will come over to your side. Or build it and they will come as they say. Constantly trying to get attention by complaining all the time, will turn people off to your product.
    • It use to be a nightmare, with LibreOffice supporting a newer draft ODF standard by default, and Microsoft Office supporting the older non-draft standard. Now that they both support the same version of ODF, they should be interoperable.
    • Brave Browser 1.91.171 by Razvan Serea Brave Browser is a lightning-fast, secure web browser that stands out from the competition with its focus on privacy, security, and speed. With features like HTTPS Everywhere and built-in tracker blocking, Brave keeps your online activities safe from prying eyes. Brave is one of the safest browsers on the market today. It blocks third-party data storage. It protects from browser fingerprinting. And it does all this by default. Speed - Brave is built on Chromium, the same technology that powers Google Chrome, and is optimized for speed, providing a fast and responsive browsing experience. Brave Browser also features Brave Rewards, a system that rewards users with Basic Attention Tokens (BAT) for viewing opt-in ads. This innovative system provides an alternative revenue model for content creators and a way to support the Brave community. SlimBrave Neo takes all the good things about Brave and makes them even better by keeping everything clean, light, and privacy-focused. It removes the extra clutter, turns off features you might not need, and cuts down on anything that could slow you down or collect unnecessary data. Because it relies on simple settings and policies instead of modifying the browser itself, you still get full Brave compatibility—just in a smoother, lighter, and more privacy-friendly package. Brave Browser 1.91.171 changelog: General Fixed Cardano not being disabled on upgrade to Brave Origin. Upgraded Chromium to 149.0.7827.103. Origin Removed “Survey Panelist” setting from brave://settings/privacy. Fixed P3A and usage ping under brave://settings/privacy being displayed on first launch on Linux. Upgraded Chromium to 149.0.7827.103. Download: Brave Browser 64-bit | 1.2 MB (Freeware) Download: Brave Browser 32-bit View: Brave Homepage | Offline Installers | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      517
    2. 2
      PsYcHoKiLLa
      189
    3. 3
      +Edouard
      156
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!