V-2, V-4 do they exist?


Recommended Posts

i know there are V6, V8, V10...... V20 engines..

but do V2 and V4 engines exist? i've never heard of it or heard anyone talk about it, as far as i know, anything below 6 cylinders (for a car) is an inline4 engine (yes i know there's also inline6..but not the point)

my dad says there are many cars all over europe with V4 engines. if so, why aren't there any in the US?

Link to comment
https://www.neowin.net/forum/topic/405906-v-2-v-4-do-they-exist/
Share on other sites

Inlines last longer. And motorcycles might have a variation of a v2. I thought they were called twins, but we'll see.

i think you're right on that..

so it seems that they do exist, but now i need to find out why they don't sell/make/import them here.

There are 'V-2' in motorcycles, better known as twits. (Harley Davidson, Ducatis) and a few V-4s in motorcycles (Honda Interceptor is the only one I know of off the top of my head). Honda's RC211V MotoGP bike is a V-5.

But V-4s don't make enough power to justify the cost of mass producing them. You can get more power out of an inline 4 and with an inline 4 you only have to make 1 cylinder head and whatnot.

make sence?

nope..

i did some more research.. looks like Ford was still producing V4 engines until the late 80's.. they have these cargo vans, i don't know the model name, but they're running on V4 engines..

and they simply don't use them now since they are not reliable and very low in power.. a 1700cc V4 only produces about 68HP.. while an inline4 1700cc produces.. what? 130HP??

and just looking at pictures of a V4.. it just looks cheap and weak.. like an oversized lawn mower engine.

Piston configuration does not has as much to do with torque as displacement does. An inline-6 and a V-6 with similar displacement and similar amounts of technology will produce very similar torque numbers. Just for illustration purposes, I'll give some figures below.

BMW 3.0 I6: 220lb-ft

Honda 3.0 V6: 211lb-ft

Now for the SUV engine comparison...

GM 4.2 I6: 277lb-ft

Nissan 4.0 V6: 291lb-ft

But V-4s don't make enough power to justify the cost of mass producing them. You can get more power out of an inline 4 and with an inline 4 you only have to make 1 cylinder head and whatnot.

make sence?

Doesn't make sense to me at all...

Let's wind back to 1963 when 100bhp was a lot in a European family saloon.

Lancia (who produced the first V engines) had a V4 engine that in 1.1 form made 60bhp, and later 70bhp. That's pretty good for a modern 1.1 car, let alone a 40 year old one.

In 1.6 form it put out a very healthy 135bhp. That's a lot even today - 85bhp / litre.

So, V4's can put out as much power as an inline 4. (For comparison, the contemporary European (Ford) Lotus Cortina put out 105bhp from a 1.6, and it was classed as a performance car in it's day)

V2's are also known as V-Twins and are common in bikes.

V2 and V4 engines DO exist, my country is full of 'em :D almost all japan cars have a V4 engine (at least all 2000 and below). Why doesn't northamerica has? Dunno :pinch:

Unless Nissan, Toyota, Honda and the lot all engineered totally different engine lines for NA and Japan, you have I-4s also.

The reason there aren't (many) V-4s is that an inline cylinder engine is inherently smoother and more stable (and hence more reliable in the long run) than a V-configuration. So whenever, possible (read: whenever space permits), manufacturers use an inline engine. Most cars, however, don't have the space for an inline-6 unless it's very precisely engineered (BMW, Porsche), and they don't want to spend the money/time so they stick a V-6 in there. V-configurations -- and VW's new "W" configuration -- are all more compact than inlines.

So in short, given the space it's better to use an inline-cylinder engine. Which is why you always see inline-4s.

There is V4s but are now uncommon, They had them in old classic cars in the 1900 - 1960 really.

The reason why some cars use a V instead of an inline is to do with vibrations. Sometimes if there is space and you want alot of power a V would be better as it more balanced and stress on the engine isn't as high.

Small cars normaly have 3 cylinders family cars have 4 cylinders. 4x4 will normaly use both on differnt version. More powerful versions are normaly V6's

There is V4s but are now uncommon, They had them in old classic cars in the 1900 - 1960 really.

The reason why some cars use a V instead of an inline is to do with vibrations. Sometimes if there is space and you want alot of power a V would be better as it more balanced and stress on the engine isn't as high.

You're incorrect. Inline engines are smoother and with less vibration, but they take up more space than a V. BMW has used inline 6 engines for ages, as has Porsche, and now GM is starting to use them in some SUVs. They're generally better than V-6s, but as I said take more space and therefore require more careful engineering to package correctly.

Small cars normaly have 3 cylinders family cars have 4 cylinders. 4x4 will normaly use both on differnt version. More powerful versions are normaly V6's

That may be true for the UK/EU, but the original poster is from the US and we have almost no 3-cylinder cars (can't think of a single one that's still sold here, actually), and 4-cylinder cars are only the smallest of the small. Most family cars here are V6's. And there's not a whole lot of 4-cylinder SUVs here that anyone would actually buy. The least an SUV here needs is usually a 6, more commonly an 8. Not that I condone our buying habits, I'm just informing.

EDIT: for clarity, I should add that Porsche actually uses what some consider a variant of the inline, called the flat-6. The cylinders are horizontally opposed.

Edited by mrogers

I dont know why people are saying 4 cylinders are uncommon, there are plenty of them around.

The '90 something Corsica I drove was a 4 cylinder. So was my parents hunk of crap Taurus, and so is my dads Truck....4 cylinder truck.....why.....WHY?!

You're incorrect. Inline engines are smoother and with less vibration, but they take up more space than a V. BMW has used inline 6 engines for ages, as has Porsche, and now GM is starting to use them in some SUVs. They're generally better than V-6s, but as I said take more space and therefore require more careful engineering to package correctly.

EDIT: for clarity, I should add that Porsche actually uses what some consider a variant of the inline, called the flat-6. The cylinders are horizontally opposed.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

The only inline engines used by Porsche were in the 924, 944 and 968 inline-4's

I dont know why people are saying 4 cylinders are uncommon, there are plenty of them around.

The '90 something Corsica I drove was a 4 cylinder. So was my parents hunk of crap Taurus, and so is my dads Truck....4 cylinder truck.....why.....WHY?!

4-Cylinders are common... V4's aren't.

I've driven a ton of 4-Cylinders... each very different. I've had some very fast I4's that could run circles with other v6 cars and heavy cars that use v8's. Then I've had I4's that were sooo slow. Upsettingly slow. Right now I'm stuck with a fuel eating gas guzzler 3.5 v6.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

The only inline engines used by Porsche were in the 924, 944 and 968 inline-4's

the boxer shares similarities with both inline and v engines, the pistons crank in the same axis as a inline (albiet half do it the other way) but in the same way as a v engine they have separate cam gear and intake/exhaust.

A flat 6 (or flat 4/8/12) as in the Boxster, Cayman and Carrera is actually a V6 engine, not an inline-6.

It just happens to be a very wide angle V6 (180 degrees, as opposed to the more common 60 or 90 degree angles of a regular V)

That's an interesting way of looking at it, but a flat 4 or 6 in not a V engine. That's like saying an inline 6 is a very narrow V6. A V is so named because the 2 banks of cylinders form a V shape when viewed from the front. A flat engine, also called a horizontally opposed engine is a different configuration, just like V engines and inline engines are different configurations.

I have a 1996 Ford Thunderbird with a V8 4.6L 240HP and a 1993 Thunderbird with a 3.8L V6 150HP and also an 2004 F-150 with a 4.6L V8 at 250HP My friend has SVT Mustang Cobra R with about 400HP (Now back on topic. I think the 2 Cyl would be in a Motorcycle it it resembles a V2 the V4 is in the Mini Cooper)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Zen Browser 1.21b by Razvan Serea Zen Browser is a privacy-focused, open-source web browser built on Mozilla Firefox, offering users a secure and customizable browsing experience. It emphasizes privacy by blocking trackers, ads, and ensuring your data isn't collected. With Zen Mods, users can enhance their browser experience with various customization options, including features like split views and vertical tabs. The browser is designed for efficiency, providing fast browsing speeds and a lightweight interface. Zen Browser prioritizes user control over the browsing experience, offering a minimal yet powerful alternative to traditional web browsers while keeping your online activity private. Zen Browser’s DRM limitation Zen Browser currently lacks support for DRM-protected content, meaning streaming services like Netflix and HBO Max are inaccessible. This is due to the absence of a Widevine license, which requires significant costs and is financially unfeasible for the developer. Additionally, applying for this license would require Zen to be part of a larger company, similar to Mozilla or Brave. Therefore, DRM-protected media won't be supported in Zen Browser for the foreseeable future. Zen Browser offers features that improve user experience, privacy, and customization: Privacy-Focused: Blocks trackers and minimizes data collection. Automatic Updates: Keeps the browser updated with security patches. Zen Mods: Customizable themes and layouts. Workspaces: Organize tabs into different workspaces. Compact Mode: Maximizes screen space by minimizing UI elements. Zen Glance: Quick website previews. Split Views: View multiple tabs in the same window. Sidebar: Access bookmarks and tools quickly. Vertical Tabs: Manage tabs vertically. Container Tabs: Separate browsing sessions. Fast Profile Switcher: Switch between profiles easily. Tab Folders: Organize tabs into folders. Customizable UI: Personalize browser interface. Security Features: Inherits Firefox’s robust security. Fast Performance: Lightweight and optimized for speed. Zen Mods Customization: Deep customization with mods. Quick Access: Easy access to favorite websites. Open Source: Built on Mozilla Firefox with community collaboration. Community-Driven: Active development and feedback from users. GitHub Repository: Contribute and review the source code. Zen Browser 1.21b changelog: New Features Updated to Firefox 151.0.4 Added 'Space Routing', a new feature that allows you to route links to a specific Space. To get started, click on the three dots in your Space name and click on 'Space Routing Settings'. Fixes Fixed extension-opened tabs not being created with the correct container (#14100) Fixed a bug with the Boosts editor having the wrong theme colors (#14099) Improved overflowing space icons being inaccessible and improved the feeling when hovering over them (#13747) Other minor bug fixes and improvements Download: Zen Browser | 89.8 MB (Open Source) Download: Zen Browser ARM64 | Other Operating Systems View: Zen Browser Home Page | Screenshots 1 | 2 | Reddit Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I am currently using a 4tb stick in combination with a 4tb 9100 Pro. It's only been six months since I bought them but the 990 has already dropped 1% health. Fingers crossed it doesn't go any lower.
    • But it opens the floodgates to anyone who gets a refund instead of a replacement (since refund will buy you a 1/3rd of the capacity it did years ago)
    • He has planned to file a lawsuit in small claims court so it'll only be a $1000 lesson assuming he wins. That's likely a fraction of what Samsung spends on toilet paper on a daily basis.
    • Windows Server gets DNS over HTTPS (DoH) support by Usama Jawad For the past few months, Microsoft has been previewing DNS over HTTPS (DoH) for Windows DNS Server, touting it as a foundational upgrade for zero-trust enterprise networks. It essentially introduces encrypted, authenticated DNS for the networks rather than transmitting DNS traffic in clear. Now, the company has introduced the general availability (GA) of this feature. The GA of DoH encourages organizations to deploy the solution in production environments without implementing a new client-to-resolver architecture. DoH helps improve the overall security of the network and reduces the risk of spoofing due to its zero-trust design. This is a significant change because pretty much every interaction with the network requires interfacing with DNS. DoH offers several advantages over standard DNS traffic, such as encryption using HTTPS, preventing unauthorized inspection, man-in-the-middle attacks, and traffic analysis. Since it leverages TLS certificates so that clients can verify the identity of the DNS server, it prevents spoofing through this authentication mechanism. Additionally, it's built on the DoH standard defined by the Internet Engineering Task Force (IETF), which means that it should work with modern RFC 8484-compliant clients. Finally, it integrates into the existing network architecture seamlessly and can even run in parallel with standard DNS, so that customers can migrate to the new technology at their own pace. Microsoft says that in the past few months of preview, DoH has become more stable, and customers can confidently deploy it in production environments with proper guidance. Microsoft has emphasized that migrating to DoH is necessary for organizations that are moving toward zero-trust DNS solutions. Windows clients already support DoH, but the latest availability on Windows Server provides encrypted DNS to all endpoints. The company has also mentioned that "while this release focuses on encrypting client-to-resolver communication, support for encrypted communication between Windows DNS Server and upstream DNS resolvers is planned for a future update." You can follow Microsoft's guidance to deploy DoH here, but keep in mind that you need a Windows Server 2025 installation with the latest Patch Tuesday updates installed.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      159
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!