Recommended Posts

My Windows Vista cant view tranperanly n the latest tweak vista cant open with this build of windows...

pls help me

To force transparency do the following:

1. Click Start, Run.

2. Type "regedit" (without the quotes).

3. Navigate to HKEY_LOCAL_MACHINE\Software\Microsoft

4. Create a key called DWM.

5. Inside of that key, create a new DWORD value called EnableMachineCheck, and set it to 0

6. Create another DWORD called Blur, and set that to 0

7. Create another DWORD called Animations and set that to 0.

If you force this glass will most probably run slow since your graphics card isn't fully supported. If it runs fine then you might want to add blur effects and animations. Just set your Blur DWORD to 1 and your animations DWORD to 1.

Hope this helps.

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-586965726
Share on other sites

u guys no need to find any patch... i dy know the way to enable DWM in 5270

old registry:

HKEY_local_machine/Software/Microsoft/DWM

-Animations (dword) (1)

-AnimationsShiftKey (dword) (1)

-Blur (dword) (1)

-Glass (dword) (1)

-UseAlternateButtons (dword) (1)

-CheckMachine (dword) (0)

New registry key:

HKEY_current_user/Software/Microsoft/DWM

-Animations (dword) (1)

-AnimationsShiftKey (dword) (1)

-Blur (dword) (1)

-Glass (dword) (1)

-UseAlternateButtons (dword) (1)

-UseMachineCheck (dword) (0)

after add in those key...jus restart n u will DWM...

pls take note tat CheckMachineTime changed to UseMachineCheck

Edited by kevinchlee
Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-586979414
Share on other sites

u guys no need to find any patch... i dy know the way to enable DWM in 5270

old registry:

HKEY_local_machine/Software/Microsoft/DWM

-Animations (dword) (1)

-AnimationsShiftKey (dword) (1)

-Blur (dword) (1)

-Glass (dword) (1)

-UseAlternateButtons (dword) (1)

-CheckMachine (dword) (0)

New registry key:

HKEY_current_user/Software/Microsoft/DWM

-Animations (dword) (1)

-AnimationsShiftKey (dword) (1)

-Blur (dword) (1)

-Glass (dword) (1)

-UseAlternateButtons (dword) (1)

-UseMachineCheck (dword) (0)

after add in those key...jus restart n u will DWM...

pls take note tat CheckMachineTime changed to UseMachineCheck

CHRIST does this forum need a spell checker...

Firstly, You shouldn't even be using it if your not an official tester. I could even barely understand what you posted. Also, there is a reason why your card isnt spitting out glass, its probably not a DirectX 9 native video card, and its probably a crappy 32MB onboard..

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-586985435
Share on other sites

CHRIST does this forum need a spell checker...

Firstly, You shouldn't even be using it if your not an official tester. I could even barely understand what you posted. Also, there is a reason why your card isnt spitting out glass, its probably not a DirectX 9 native video card, and its probably a crappy 32MB onboard..

sry...i know my english not so good...n im from other country...

im vista beta tester...my card could not enable glass bcoz im using non LDDM graphics card...not DirectX 9 ok? n im using 128MB ATI 9200SE...not onboard 32MB

if u don like tis thread...u can jus keep silent...don try to post something else at here

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-586990113
Share on other sites

sry...i know my english not so good...n im from other country...

im vista beta tester...my card could not enable glass bcoz im using non LDDM graphics card...not DirectX 9 ok? n im using 128MB ATI 9200SE...not onboard 32MB

if u don like tis thread...u can jus keep silent...don try to post something else at here

hm, sorry about that then, you might be able to get glass using those reg hacks, might not be pretty, but its worth a try.

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-586992826
Share on other sites

  • 3 weeks later...

CHRIST does this forum need a spell checker...

Firstly, You shouldn't even be using it if your not an official tester. I could even barely understand what you posted. Also, there is a reason why your card isnt spitting out glass, its probably not a DirectX 9 native video card, and its probably a crappy 32MB onboard..

wow from your posts, you seem like a really nice and friendly person.

if this person is or is not an offical tester, why the hell do you care?

usually when i do not understand something, i move on, not make nasty comments.

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-587100035
Share on other sites

CHRIST does this forum need a spell checker...

Firstly, You shouldn't even be using it if your not an official tester. I could even barely understand what you posted. Also, there is a reason why your card isnt spitting out glass, its probably not a DirectX 9 native video card, and its probably a crappy 32MB onboard..

Perhaps a grammar checker as well.

'Isnt' isn't a word. 'Its' is a possesive form of it. I'm sure you meant it's - the contraction of it is. You should change the order of the words 'even' and 'barely' for better clarity.

Sorry, just trying to use the same measure.

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-587100060
Share on other sites

The taskbar can be made transparent with transbar.

And the whole windows can be made transparent - but not just the titlebar.

WB5 does just the toolbar. If you convert a .msstyle of the theme you want to a wb theme, you could probably mod it and make it the perfect tranmsparent. Plus, there's hardly a noticable speed difference. You can even put the window over a visualizer in iTunes and it won't slow down, it's quite fun.

Link to comment
https://www.neowin.net/forum/topic/411800-transperant/#findComment-587100635
Share on other sites

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft wants to end printer driver headaches with Windows Ready Print by Usama Jawad A few days ago, Microsoft released Windows 11 Experimental build 26300.8553, bringing a ton of enhancements such as Start menu customization, search improvements, Taskbar polish, and other minor UI tweaks. Another relatively major enhancement snuck deep within the change log was related to upgrades to the Windows printing experience. Now, Microsoft has shared more details about these benefits. For starters, Microsoft has renamed its Modern Print Platform to Windows Ready Print. The company believes that this name highlights its shift in strategy, which now focuses on modernizing, securing, and streamlining the printing experience for Windows devices. Some of the upgrades present in Windows Ready Print have already been seeded to customers and partners. This includes ending support for third-party printer drivers via Windows Update and transitioning towards the Internet Printing Protocol (IPP) and the native Windows IPP printer driver. In line with these changes, new printer installations will default to Windows Ready Print on eligible devices starting from July 2026. However, Microsoft recognizes that not all environments will be able to migrate to this platform immediately, so it will allow users to choose between installing the printer via Windows Ready Print or the traditional OEM process. Users will be able to toggle this configuration through Settings > Bluetooth & Devices > Printers & Scanners > Printer preferences. This control applies only to new printer installations, and its functionality can also be modified via Group Policy as follows: Launch Group Policy Editor Navigate to Local Computer Policy -> Administrative Templates -> Printers Find and select 'Configure Windows Ready Print driver ranking' -> double click to open it Select 'Enabled' (if you wish to enable Windows Ready Print driver selection) or 'Disabled' (if you wish to explicitly disable Windows Ready Print driver selection). Select Apply Select OK Similarly, if you set up Windows protected print mode through the same setting in Windows 11, it will also default to using Windows Ready Print exclusively. Microsoft hopes that these improvements will help eradicate dependency on OEM-specific driver installation processes and simplify printer installations. We'll likely find out more about other tangible benefits in the coming months.
    • Hey what's about the proton vpn firefox extension ? It's not working today
    • On what though? Not Ray Tracing.
    • Agreed, but now my muscle memory immediately creates a layer for each text portion, so editing is made a little easier.
    • Happy for him, it is one of the first apps I install on a new Windows machine, been using it for years!
  • Recent Achievements

    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
    • Week One Done
      rubentuben8 earned a badge
      Week One Done
    • Week One Done
      ARaclen earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      PsYcHoKiLLa
      229
    3. 3
      Edouard
      136
    4. 4
      ATLien_0
      87
    5. 5
      Steven P.
      80
  • Tell a friend

    Love Neowin? Tell a friend!