[Review] M-Audio Studiophile LX4 Speakers


Recommended Posts

Introduction

M-Audio has been in the music industry not so much as a competitor for PC consumers, but more for recording musicians who use their products to create and record audio. Those of us enthralled by all things audio usually find ourselves stepping away from entry-level soundcards and speakers, but it's always been more difficult trying to find a good pair of stereo speakers for a PC setup due to limited selections. This is what makes the Studiophile LX4 speakers so versatile; their capability of either 2.1 or 5.1 speakers can accomodate the music or movie user. At only $350 USD for the 2.1 setup, it's price is affordable and does not sacrifice performance (the 5.1 expandable speakers can be purchased for an additional $150). For the purpose of this review, I will only be evaluating the system in 2.1 mode.

maudio017ms.jpg

Evaluation

The LX4 arrived at my front door before I was home from work. To my amazement, the box itself was huge and looked like it could've housed a typical 5.1 PC speaker system. Upon opening it, there were only the common accessories like speaker wires, power cable, and manual. Being the hardcore audio enthusiast that I am, I did not bother to read the manual and proceeded to set up the speakers without any guidance.

maudio026bo.jpg

Setup soon became a nightmare as I soon realized that the integrated amp on the subwoofer required 1/4" phono plugs. I had to make an emergency trip to RadioShack to pick up several items necessary to properly set up the system.

maudio104ot.jpg

maudio099sb.jpg

I had to get three 1/4" phono-to-RCA plugs to hook up to the integrated amp on the subwoofer, a 1/8" Y-adapter stereo-to-RCA plug for hookup to the soundcard, and finally a 1/8" stereo-to-RCA single adapter for the subwoofer cable (LFE). Make note of these items if you plan to buy a set of these speakers.

maudio063in.jpg

Here is a closer look at the LX4 speaker system, front and back. The subwoofer wasn't as monstrous as I had expected it to be, but its performance proved otherwise.

maudio114hf.jpg

maudio031hz.jpg

maudio046cv.jpg

Those of you with little children may want to reconsider getting these because like all traditional monitor speakers, there is no protected grill cover. Here is a comparison of the LX4 monitor's size alongside a Logitech Z-2200 satellite speaker.

maudio053ja.jpg

maudio084jg.jpg

Finally onto the setup. I never use the factory supplied speaker wires since they are almost always cheap quality, so I scrounged through my box of spare cables and managed to dig up a pair of MonsterXP speaker wires. I also used a set of Monster Interconnects for hookup to the left/right audio channels. While I'm not a big fan of Monster cables (they sound harsh and don't do a good job of filtering the brightness), I figured it was appropriate to pair them with the LX4 considering they are in the same category of price/performance.

maudio141ig.jpg

maudio135rg.jpg

maudio071ip.jpg

Here is the back of the X-Fi soundcard.

maudio126vv.jpg

After 30 minutes of fiddling around with speaker angles and calibrating, I finally had the LX4 in their temporary positions for music evaluating. The monitors have to be toed in slightly and have a distance of no less than 3.5 feet between them for the best soundstage.

maudio150jl.jpg

The Music

The LX4 definitely has the detail and clarity level of higher-end bookshelf speakers in the $600-$1000 range, capable of producing rich high-frequencies and maintaining a solid tonal balance between midrange and low-frequencies. The subwoofer is not at all too overpowering and outputs more accurate bass than I've heard from any of the Logitech Z-5500 or Klipsch 5.1 Ultra line of speakers. Lows are quick and punchy with all types of music and never once did I hear any muddiness. All material I played through the LX4 allowed for good depth, focused imaging, and was easy to listen to after properly calibrating the speakers.

Garth Brooks as Chris Gaines' track It Don't Matter To The Sun in HDCD really revealed the true character of the LX4. His voice was extremely neutral and the guitar strikes were so revealing it made me almost forget I was listening to speakers. These monitors really do an excellent job at detail execution!

The Games

I did not have the chance to test the LX4 on many different games but let me just say that of the few games tested, the LX4 had chills running down my spine! During the intro screen of Need For Speed: Most Wanted (right before you select users), I heard crystal clear details of tires screeching and engines revving in the far background. I was amazed that I had played this game 100 times before (using X-Fi and Z-2200) and those subtle details never stood out enough to "wow" me. Even at just this intro screen, cars chased left and right behind my ears. I was stunned! The one problem these speakers did have with gaming was the bleeding highs; however, this problem was quickly fixed by adjusting the treble down to about 25% using the X-Fi volume panel.

The Downside

There is no volume control anywhere else on this system except behind the subwoofer which makes it a hassle. I have been using the X-Fi software to adjust volumes but will more than likely resort to hooking everything up to an external integrated amp/processor for easier volume adjustment. The system was not intended for use with only PCs, therefore no phono plugs and adapters were included. I wish M-Audio would've supplied its consumers with these for the sake of simplicity. As far as sound performance, the LX4 monitors do tend to sound a bit bright at times (especially at higher volumes). I have spent hours tweaking and calibrating but cannot get it perfect. I guess you cannot expect too much from a system that is only $350, although I'm sure with the right soundcard (EMU 1212) the LX4 would definitely perform better.

Conclusion

I have found the M-Audio Studiophile LX4 system to be one of the best sub $400 speakers for PC enjoyment. Low frequencies were solid without any boominess and soundstage was dead-center! Compared to my old set of B&W 602S3 bookshelf speakers, the soundstage isn't as wide but when you factor in that it is only $350 these reference monitors are excellent.

Packaging: 10/10

Design: 8.5/10

Ease of Setup: 7/10

Accessibility: 8.5/10

Music: 9.5/10

Games: 9.5/10

Value (Price/Performance): 10/10

OVERALL: 9/10

Score Comparison Reference Guide:

Dynaudio BM5A Studio Monitors: 9.5/10

Logitech Z-5500: 8/10

Klipsch ProMedia 2.1: 8/10

Logitech Z-2200: 7.5/10

Logitech Z-2300: 6/10

Edited by coolmonk

Great review coolmonk. I have a slightly off topic question though. In your experience, why did you give the Z-2300 a 6/10? Thanks.

Well depending on what type of "audio" user you are, you may or may not agree with my opinion. From the POV of an audiophile or hardcore audio enthusiast, the Z-2300 just isn't capable of producing any accurate details, whether it be highs or lows. Bass is too boomy and highs are cloudy...and this was on the X-Fi soundcard. You really can't complain considering it's a budget speaker, and I rated it low because it came out after the Z-2200 (which is superior to the Z-2300) so it's supposed to be an upgraded version yet fails to outperform its predecessor. In my opinion, the best budget 2.1 PC speakers are the Klipsch ProMedia 2.1!

I will be doing another review over the weekend on the Dynaudio BM5A monitor speakers ($1,500/pair) and will use the EMU 0404 soundcard. These speakers are believed to be the BEST thing you can get for under $3,000. Keep an eye out for it...

Do you make music then?.. because these arn't the type of speaker the usual consumer would buy.

No I don't make music...I just enjoy listening to it. While these speakers aren't primarily aimed at PC consumers, it is well within the same price as other sets (Z-5500 is $350+ and Creative Gigaworks is $500). Therefore, I'm simply justifying that for a similar price you can have yourselves a much better speaker.

Now...the Dynaudio BM5A that I will be getting this weekend are more for audiophiles, yes, but it's always nice and fun to read a review about extreme products every now and then, right? :yes:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AdGuard Family lifetime deal now only $14.97 by Steven Parker Today's highlighted Neowin Deal comes via our Apps + Software section, where you can get a lifetime subscription and save 91% on a lifetime AdGuard Family Plan. AdGuard is a unique program that has all the necessary features for what they claim to be "the best web experience." The software combines the an advanced ad blocker, a privacy protection module, and a parental control tool—all working in one app. This software deals with annoying ads, hides your data from a multitude of trackers, protects you from malware attacks, and even lets you restrict your kids from accessing inappropriate content. Install AdGuard and see the internet as it was supposed to be: clean and safe. Get rid of annoying banners, pop-ups & video ads once and for all Hide your data from the multitude of trackers & activity analyzers that swarm the web Avoid fraudulent and phishing website and malware attacks Protect your kids online by restricting them from accessing inappropriate & adult content Good to know Family Plan Length of access: lifetime This plan is only available to new users Redemption deadline: redeem your code within 30 days of purchase Max number of devices: 9 Access options: desktop & mobile Software version: AdGuard Family Updates included A lifetime subscription of AdGuard Family Plan normally costs $169.99, but this deal can be yours for just $14.97, that's a saving of $157.02. For full terms, specifications, and license info please click the link below. Get this AdGuard Family lifetime deal for just $14.97 (was $169.99) Although priced in U.S. dollars, this deal is available for digital purchase worldwide. As an online publication, Neowin too relies on ads for operating costs and, if you use an ad blocker, we'd appreciate being whitelisted. In addition, we have an ad-free subscription for $28 a year, which is another way to show support! Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • Passkeys: Think of them like a broken heart necklace. Imagine one of those heart necklaces that breaks into two matching pieces. One person keeps one half, and the other person keeps the other half. With passkeys, the website has one half, and you have the other half. If the website gets hacked and someone steals its half, that stolen piece is useless by itself. It cannot unlock your account without your matching half. This particular heart necklace is one of a kind, there is only one in existence. Your half of the necklace has to be stored somewhere. It might be stored on your phone, tablet, computer, security key, or a password manager that can sync it between all your devices. A security key is a small physical device that you keep with you, kind of like a house key, car key, or flash drive. I would not usually recommend a security key as the first option for the average person. For most people, it is easier to use their phone, computer, or a password manager that can sync passkeys between their devices. A security key is more like a spare key you keep in a safe place, just in case you lose access to your other devices or your password manager. Some security keys plug into your computer. Some plug into your phone or tablet. Some get tapped against your device. The idea is simple: a security key can hold another passkey for the same website. Think of it like creating a second one-of-a-kind heart necklace for the same account. One necklace could be paired with your password manager, while another necklace could be paired with your security key. That means the website has more than one matching half on file. One half matches the passkey in your password manager. Another half matches the passkey stored on your security key. So, if you lose access to your phone, computer, or password manager, you would still be able to log in using the passkey stored on your security key. Think of it like keeping an extra special necklace piece on a tiny keychain, stored somewhere safe. The website still has the matching half for that security key, but your half is safely stored inside the little key. A passkey does not automatically exist on every device you own. It lives wherever you save it. If your half is stored on one device, then that device is the one that has the matching piece. For example, if you create the passkey on your Windows computer and it is only saved to that computer, your iPhone does not automatically have that same half. If you create it on your iPhone and it only stays on that iPhone, your Android phone does not automatically have it either. That is where password managers come in. A password manager can act like a protected jewelry box for your passkeys. Instead of your half of the necklace being locked to only one device, the password manager can securely sync that half to your other approved devices. For example, Apple Passwords and iCloud Keychain can sync passkeys between your Apple devices. Google Password Manager can sync passkeys with your Google account. But password managers such as 1Password and Bitwarden can sync passkeys between everything, your phones, tablets and computers. Now, you might ask: “What happens if I lose access to the device that has my passkey?” That depends on where your passkey was saved and what recovery options the website gives you. If your passkey was synced through a password manager, you may be able to sign in from another device that has access to that same password manager. For example, if your passkey is saved in iCloud Keychain, Google Password Manager, 1Password, or Bitwarden, another approved device may still have access to it. If your passkey was saved only on one phone, computer, or security key, and you lose that device, then you may not have your half of the necklace anymore. In that case, you would usually need to use the website’s backup login or account recovery options. A lot of websites that support passkeys still let you fall back to your regular password. So if you lose access to your passkey, the site may still let you log in with your password, a code sent to your email, a text message, a recovery code, or some other account recovery process. That is convenient, but it is also important to understand: if the website still allows password login, then your password still matters. Passkeys are safer than passwords, but if your account still has a password as a backup, you should still use a strong, unique password and turn on two-factor authentication if the website offers it. This is why it is a good idea to have more than one safe way back into important accounts. For example, you might keep your passkey in a syncing password manager, add a second trusted device, save recovery codes somewhere safe, or set up a backup security key. A passkey is very secure, but just like a real key, you need a backup plan in case you lose access to it. Now, you might ask: “What stops a hacker from copying my half of the necklace?” That’s the important part: your half is protected. It is not something you type in, and it is not something the website gets to keep. Think of your half as being locked inside a tiny safe on your phone, computer, security key, or password manager. That safe only opens when you approve it with your fingerprint, face, PIN, or device password. When you log in, the website does not need to see your half. It only needs proof that your half matches its half. Your actual half is not handed over to the website. This is different from a password. With a password, you type the secret into the website. If you type it into a fake website, the hacker now has it. With a passkey, you are not typing your secret into the website. Your device is proving you have the matching half without giving the half away. That also helps protect you from fake websites. If someone makes a fake login page that looks like the real site, your device can tell it is not the real match. It will not use your passkey there. Now, could someone use your passkey if they stole your device, got into your password manager, or somehow unlocked the safe that holds your half? Yes, that is why your device password, PIN, fingerprint, face unlock, and password manager security still matter. But a hacker cannot just steal your passkey from the website or trick you into typing it into a fake page like they can with a password. That is why passkeys are safer than passwords. The two matching pieces have to come together, like two lovebirds who were once separated and are finally reunited.
    • Newegg offers insane combo deal on Amazon Prime Day 2026 that beats Steam Machine by Sayan Sen Building a PC is undoubtedly difficult nowadays but with this epic combo deal, Newegg is trying to make it as easy for you as it is possible. If you are making a new one or even upgrading an old system to a new Windows 11 device, this combo bundle is truly unmissable as you get AMD's Ryzen 9800X3D, a compatible X870 motherboard, a 240mm AIO liquid cooler and finally a Samsung 990 PRO SSD all for under $1000 (purchase link under the specs table down below). This should beat out the newly launched Steam Machine from Valve in terms of performance and performance per dollar especially if you are willing to set Linux up on it. Essentially with this combo you will get the AMD Ryzen 7 9800X3D 8-core 3D V cache CPU, Samsung's 990 PRO 2TB NVMe SSD, the MSI MAG X870 TOMAHAWK WIFI ATX Motherboard, and finally the Cooler Master Elite Liquid 240. Thanks to that massive vertically stacked L3 cache, the X3D desktop processors, including the 9800X3D, also come with the benefit of not needing fast memory. Even DDR5-5600 should be plenty for it. The technical specifications of the Ryzen 7 9800X3D are given in the table below: Specification Value Architecture Zen 5 Cores / Threads 8 / 16 Base Clock 4.7 GHz Max Boost Clock Up to 5.2 GHz L1 Cache 640 KB L2 Cache 8 MB L3 Cache 96 MB Total Cache 104 MB CPU Core Process TSMC 4nm FinFET I/O Die Process TSMC 6nm FinFET Socket AM5 Default TDP 120W Max Temperature (Tjmax) 95°C Thermal Solution Not included Memory Type DDR5 Max Capacity 256 GB Memory Speeds 2x1R: DDR5-5600 2x2R: DDR5-5600 4x1R: DDR5-3600 4x2R: DDR5-3600 PCIe Version PCIe 5.0 PCIe Lanes (Total/Usable) 28 / 24 USB 3.2 Gen 2 (10Gbps) 4 USB 2.0 1 Graphics Cores 2 CU RDNA 2 Frequency 2200 MHz DisplayPort over USB-C Yes Overclocking Unlocked Up next we have the tech specs for the MSI MAG X870 TOMAHAWK WIFI Motherboard: Specification Value Chipset AMD X870 CPU Support AMD Ryzen 9000 / 8000 / 7000 Series Desktop Processors Socket AM5 Memory Slots 4 × DDR5 UDIMM Maximum Memory Capacity 256GB Memory Support DDR5 8400–5600 MT/s (OC), DDR5 5600–4800 MT/s (JEDEC) Integrated Graphics Outputs 1 × HDMI 2.1 FRL (up to 8K 60Hz) 2 × USB4 Type-C with DisplayPort 1.4 HBR3 (up to 4K 60Hz) Expansion Slots PCI_E1: PCIe 5.0 x16 (CPU) PCI_E2: PCIe 3.0 x1 (Chipset) PCI_E3: PCIe 4.0 x4 (Chipset) Audio Realtek ALC4080 Codec 7.1-Channel USB High Performance Audio Supports up to 32-bit/384kHz playback on front panel S/PDIF output M.2 Slots 4 × M.2 M2_1: PCIe 5.0 x4 (CPU, 22110/2280) M2_2: PCIe 5.0 x4 (CPU, 2280/2260) M2_3: PCIe 4.0 x2 (Chipset, 2280/2260) M2_4: PCIe 4.0 x4 (Chipset, 2280/2260) SATA Ports 4 × SATA 6Gb/s RAID Support RAID 0, 1, 5, 10 for M.2 NVMe storage devices Rear USB Ports 4 × USB 2.0 3 × USB 5Gbps Type-A 2 × USB 10Gbps Type-A 1 × USB 10Gbps Type-C 2 × USB4 40Gbps Type-C Front USB Headers 4 × USB 2.0 4 × USB 5Gbps Type-A 1 × USB 20Gbps Type-C LAN Realtek 8126-CG 5G LAN Wireless Wi-Fi 7 (M.2 Key-E module pre-installed) Supports 2.4GHz / 5GHz / 6GHz bands Up to 5.8Gbps Supports 802.11 a/b/g/n/ac/ax/be Bluetooth Bluetooth 5.4, MLO, 4KQAM Internal Power Connectors 1 × 24-pin ATX Power 2 × CPU Power Connectors 1 × PCIe 8-pin Power Connector Fan Headers 1 × CPU Fan 1 × Combo Fan (Pump/System) 6 × System Fan RGB Headers 3 × Addressable V2 RGB (JARGB_V2) 1 × RGB LED (JRGB) Other Internal Headers 1 × EZ Conn-header 2 × Front Panel Headers 1 × Chassis Intrusion 1 × Front Audio 1 × TPM 2.0 Header Debug Features 4 × EZ Debug LEDs 1 × EZ Digit Debug LED Rear I/O Ports Clear CMOS Button Flash BIOS Button HDMI 2 × USB 40Gbps Type-C 1 × USB 10Gbps Type-C 4 × USB 10Gbps Type-A 3 × USB 5Gbps Type-A 4 × USB 2.0 5G LAN Port Wi-Fi/Bluetooth Antenna Connectors Audio Connectors Form Factor ATX The Samsung 990 PRO is a PCIe Gen4 NVMe SSD and still one of the fastest drives available today for under $500. Speaking of fast, sequential reads and writes are rated at 7450 MB/s and 6900 MB/s, respectively. The random throughputs for reads and writes are 1400K IOPS and 1550K IOPS, respectively. The 990 PRO is based on Samsung's 7th Gen V-NAND flash, and it too is TLC. It packs 2 gigs of LPDDR4 DRAM cache, which helps the random performance. The endurance rating for this is 1200 TBW (terabytes written), which should be sufficient for most users. The Samsung 990 PRO is compatible with the PlayStation 5, but if you are going to use the 990 PRO on a PC, check out the Samsung Magician app that lets you track your drive's health, update its firmware, customize various settings, and more. The tech specs are given below: Specification Value Interface PCIe Gen 4.0 x4, NVMe 2.0 Form Factor M.2 2280 Controller Samsung In-house Controller NAND Flash 3D TLC DRAM Cache 2GB LPDDR4 Sequential Read (Max) 7,450 MB/s Sequential Write (Max) 6,900 MB/s Random Read (4K) Up to 1,400,000 IOPS Random Write (4K) Up to 1,550,000 IOPS TBW (Endurance) 1,200 TBW MTBF 1,500,000 hours Operating Temperature 0°C to 70°C Storage Temperature -40°C to 85°C Shock Resistance 1,500G / 0.5ms Heatsink No Get the combo deal at this link: AMD Ryzen 7 9800X3D, Samsung 990 PRO 2TB, MSI MAG X870 TOMAHAWK WIFI motherboard, Cooler Master Elite Liquid 240: $784.99 + $25 off with promo code FTTF77: $759.99 (Sold and Shipped by Newegg US) Good to know This Newegg deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • I heard from a lot of people that driver support for the latest games when RDNA first came out (Radeon 5000 series) was pretty bad, but if you didn't buy the card on day one, or were not trying to play the latest titles, then you were isolated from that issue. Other than that, it's been good and only getting better.
  • Recent Achievements

    • One Month Later
      timbobit earned a badge
      One Month Later
    • One Month Later
      nates earned a badge
      One Month Later
    • Week One Done
      Almohandis earned a badge
      Week One Done
    • Rookie
      dorf went up a rank
      Rookie
    • First Post
      mike_rumble earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      469
    2. 2
      +Edouard
      165
    3. 3
      PsYcHoKiLLa
      104
    4. 4
      Michael Scrip
      87
    5. 5
      Steven P.
      71
  • Tell a friend

    Love Neowin? Tell a friend!