Uninstall GRUB boot loader!


Recommended Posts

Is there a way to uninstall the GRUB boot loader either through a live Linux CD or some diagnostic boot CD?

Currently I've used my Toshiba restore disk to reformat my system--removing partitions containing Linux--but unfortunately it didn't do anything to the MBR, so now I have a system that will never load any OS and goes into an endless cycle of reboots whenever I hit the power button.

Any help will be greatly appreciated. Thanks in advance

Link to comment
https://www.neowin.net/forum/topic/426708-uninstall-grub-boot-loader/
Share on other sites

You need to overwrite the boot sector of your partition, and the only way to do that is to use the Recovery Console and run fixboot (not fixmbr). You could also install Windows again, which would recreate the boot sector, but then you'd have an extra Windows installation...

Either way, you'll need a Windows CD, so go find one, even if it's a friend's (Y)

I've always just had to use FIXMBR and had it work every time. However, I'm not sure what you can do if you don't have the CD.

There might be the possibility that you can use a win98 boot disk and do the fixboot command. that might work... not sure...

There might be the possibility that you can use a win98 boot disk and do the fixboot command. that might work... not sure...

No, that won't work. Windows 98 boot disks don't contain ANY NT files, and as such are practically useless on NT/2000/XP machines because they run DOS. The Recovery Console is technically NT, AFAIK.

No, that won't work. Windows 98 boot disks don't contain ANY NT files, and as such are practically useless on NT/2000/XP machines because they run DOS. The Recovery Console is technically NT, AFAIK.

I do have a very old Windows NT CD. Maybe that'll work?

Or, alternatively, should I just reinstall a version of linux to get a bootloader and then uninstall the boot loader from within linux? I'd get a "Missing operating system" message the next time I boot, but I've gotten that before and the recovery disk was somehow able to correct that problem.

Again, any help would be greatly appreciated.

You have access to the i386 folder anywhere on your hard disk or a restore cd? from windows start > run > (path to i386 folder)\winnt32.exe /cmdcons will install the recovery console which can be accessed when you next boot. Then remove the grub loader as described above

what about just installing Linux and removing the MBR completely from that os? would that work?

I doubt it because you'll be left without a mbr rather than it returning to the original windows one. I think you'll have an easier time finding a copy of windows xp home (i presume)

I doubt it because you'll be left without a mbr rather than it returning to the original windows one. I think you'll have an easier time finding a copy of windows xp home (i presume)

I am pretty sure that it has to be XP Pro, as XP Home does not include the Recovery Console, so you cannot do the fixmbr thing.

I had a similar problem last night when trying a dual boot with Ubuntu and XP Pro. To fix it, I used a Mandrake install CD to get into the partitioner, blitzed all the linux partitions, setup a temp Linux partition, put Mandrake on (with LILO overwriting GRUB at the mbr) and then used the rescue mode of Mandrake to restore the XP bootloader.

That got me into Windows and then I removed the Linux partition using Partition Magic. Now back to XP Pro (single boot) and no problems whatsoever.

I doubt it because you'll be left without a mbr rather than it returning to the original windows one. I think you'll have an easier time finding a copy of windows xp home (i presume)

Yes, I would be left without an MBR, but the recovery disk appears to be able to repair it.

You could get a GRUB boot disk in order to get into windows. Then do the C:\ <path to i386> \winnt /cmdcons thing, I've done that and it works. When you reboot, it will need the GRUB boot disk again, and then it will give you the menu for XP or Recovery Console. Log in to the RC, and type fixmbr. Voila, done.

I'm pretty sure grub boot disks can boot to a hard drive, anyway.

And is anyone else wondering why this is in XP Client?

Also, sorry to say this mark, but XP Home does have the RC. I've used it.

There are also RC bootable disks, without the OS on it.

Does it not? Blimey that's a bit of a loss! Best of luck with the Linux route Jason

I suppose I could borrow a friend's XP Home or Pro CD, but i'd rather do it myself.

The problem was, when I used a SUSE Live CD to uninstall the boot loader, it didn't actually complete the operation. When the YAST2 module loaded to give me access to boot loader options, it said that there was a partitioning problem :rolleyes:

If anyone can boot a Linux LiveCD on a Windows box, they can use the dd command to copy out the MBR boot info (however many bytes that is, 446 or something), then you can use a Linux LiveCD to use the dd command to re-write it to your drive without needing to find any other utiltites.

EDIT: Yes, it is 446 bytes: http://www.diydatarecovery.nl/mbr.htm

The command dd if=/dev/hda of=/dev/hda1/mbr.bin bs=446 should work to read the MBR, and place it in a file called "mbr.bin" in the root directory of your first partition (assuming your LiveCD can write to it). You can pick a floppy or some other device, too.

You would have to get a copy of the MBR from another PC. You could do it yourself, if you have another PC.

Disclaimer: I have *NEVER* tried this personally, so cannot vouch that it will work.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use some unofficial tweak tool to enable it because it actually isn't available to you yet and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
    • Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!