Linksys WRT54G vs D-Link DI-624


Recommended Posts

I own both of those, (The D-Link was from Verizon) I have to say the WRT54G Is by far the best. Their Configuration web system is much more organized, flows better, and well... looks better. Also the signal is great. much further than the D-Link.... If you happen to come across a WRT54G that has the linux firmware, you can do a lot of cool things with it.

Linksys WRT54G is better. I have the Linksys WRT54GS with the HyperWRT firmware.

Tom's Networking Review - WRT54G

DI-624 This is something that I have experienced before while providing services to a company. The connection was dropping constantly.

Pros

* 108 Mbps performance

* WPA security and WEP encryption support

* Content filtering policies - MAC, IP, URL and domain name

Cons

* Some owners report dropped connections and frequent resets

* Some owners have reported quality of service issues with D-Link tech support

/EZ

Edited by EZRecovery

Why not consider the DGL-4300 ???

Totally different interface than other D-link set ups. I just cant say enough good things about this router.

Someone seems to have the same router as I do. It's very stable, I get the best range from this than most other consumer wireless routers. And I have yet to get any disconnects/drops. Full signal anywhere in my house, and outside for a pretty good distance.

...

If you happen to come across a WRT54G that has the linux firmware, you can do a lot of cool things with it.

I beleive those are designated with an "L" at the end, as such: WRT54GL

thnx guys for all ur replies u have convince me about the linksys router. Now I'm looking into getting this one linksys WRT54GS with this Wireless-G Notebook Adapter WPC54G, is that any good? will i have any compatibility probles?

I only have a budget of $160 Can for both, reason I'm trying to stay at that price range.

again thnx for all ur help/replies.

X@vier

thnx guys for all ur replies u have convince me about the linksys router. Now I'm looking into getting this one linksys WRT54GS with this Wireless-G Notebook Adapter WPC54G, is that any good? will i have any compatibility probles?

I only have a budget of $160 Can for both, reason I'm trying to stay at that price range.

again thnx for all ur help/replies.

X@vier

If you are getting the WRT54GS router, get yourself the WPC54GS card, not the WPC54G.

If you are in budget, just get the WRT54G and the WPC54G. Getting into the SpeedBooster might add about $40 extra.

/EZ

If you are getting the WRT54GS router, get yourself the WPC54GS card, not the WPC54G.

If you are in budget, just get the WRT54G and the WPC54G. Getting into the SpeedBooster might add about $40 extra.

/EZ

thnx, i just found the WRT54GS, i didn't see it before.....yes i am in a budget but i just calculated the prices and i can still do it.....so i guess is the WRT54GS router and the WRT54GS Adapter.

thnx for all ur help guys,

X@vier

All you need to know about linksys is available here : http://www.linksysinfo.org/

Please be reminded that the WRT54GS VER 5 is not working with 3rd party firmware. Most of the newest (in the market) router is v5 already.

I would suggest you to get a WRT54G (without the S) since you will mostly not use the "Speedbooster" function anyway unless you buy all adapters adopting "Speedbooster" from linksys. Or, you can just buy the older version of WRT54G or WRT54GS over ebay. Again....be aware of the hardware version. There are differences between each hardware version. Head over to http://www.linksysinfo.org/modules.php?nam...=showpage&pid=6 and you can deal with a lot of information on the differences.

Anyway, I quote from Linksysinfo.org by TOXIC:

NO 3rd Party Firmware exists for this model. the problem is the amount of RAM and the OS is VxWorks and not Linux.

if you want to use 3rd Party Firmwares, DO NOT BUY A WRT54G v5

To find out which WRT54G you are buying look at the Serial number on the box or the Unit itself.

There are serveral versions of the WRT54G, different powersupplies, chipsets, features, though all based on similar firmware.

To find out which model you have please go by the Serial Number of your WRT54G.

This is the only true way of finding out what one you have.

Known serial numbers (first 4 characters) vs versions / Chipsets:

CDF0 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF1 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF2 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF3 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF5 = WRT54G v2.0 / ADM6996L Chipset / 200Mhz CPU

CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / 200Mhz CPU

CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset / 200Mhz CPU

CDF9 = WRT53G v3.1 / BCM5325EKQM Chipset / 200Mhz CPU

CDFA = WRT54G v4.0 / BCM5352E Chipset / 200Mhz CPU

CDFB = WRT54G v5.0 / BCM5352EKPB Chipset < the one to stay away from.

recommendations:

WRT54G v2.0-v4.0

WRT54GS v1.0-v4.0

All you need to know about linksys is available here : http://www.linksysinfo.org/

Please be reminded that the WRT54GS VER 5 is not working with 3rd party firmware. Most of the newest (in the market) router is v5 already.

I would suggest you to get a WRT54G (without the S) since you will mostly not use the "Speedbooster" function anyway unless you buy all adapters adopting "Speedbooster" from linksys. Or, you can just buy the older version of WRT54G or WRT54GS over ebay. Again....be aware of the hardware version. There are differences between each hardware version. Head over to http://www.linksysinfo.org/modules.php?nam...=showpage&pid=6 and you can deal with a lot of information on the differences.

Anyway, I quote from Linksysinfo.org by TOXIC:

NO 3rd Party Firmware exists for this model. the problem is the amount of RAM and the OS is VxWorks and not Linux.

if you want to use 3rd Party Firmwares, DO NOT BUY A WRT54G v5

To find out which WRT54G you are buying look at the Serial number on the box or the Unit itself.

There are serveral versions of the WRT54G, different powersupplies, chipsets, features, though all based on similar firmware.

To find out which model you have please go by the Serial Number of your WRT54G.

This is the only true way of finding out what one you have.

Known serial numbers (first 4 characters) vs versions / Chipsets:

CDF0 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF1 = WRT54G v1.0 / ADM6996L Chipset / 125Mhz CPU

CDF2 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF3 = WRT54G v1.1 / ADM6996L Chipset / 200Mhz CPU

CDF5 = WRT54G v2.0 / ADM6996L Chipset / 200Mhz CPU

CDF7 = WRT54G v2.2 / BCM5325EKQM Chipset / 200Mhz CPU

CDF8 = WRT54G v3.0 / BCM5325EKQM Chipset / 200Mhz CPU

CDF9 = WRT53G v3.1 / BCM5325EKQM Chipset / 200Mhz CPU

CDFA = WRT54G v4.0 / BCM5352E Chipset / 200Mhz CPU

CDFB = WRT54G v5.0 / BCM5352EKPB Chipset < the one to stay away from.

recommendations:

WRT54G v2.0-v4.0

WRT54GS v1.0-v4.0

wow thats a lot of useful info, thnx mipra that was a lot of help.

so i guess i have to look for the WRT54GS v1.0 - v4.0 and yes i will be getting the adapter with the SpeedBooster.

X@vier

EZRecovery......you have a picture of a dude with no shirt on......care to tell us anything ?

:D

haha thats funny because i was thinking the same thing :pinch:

anyways, where am I going to find a WRT54GS v1.0-v4.0? when all the new ones are v5.0 :blink:

X@vier

You will have to inspect each box at the store for the right serial numbers. I tried every where and all i

could find were V-5s. I ended up buying a WRT54GL and flashing it with HYPERWRT, wich will get you

speedbooster. NCIX has them in stock.

WRT54GS

CGN0 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN1 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN2 = WRT54GS v1.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN3 = WRT54GS v2.0 / BCM5325EKQM Chipset / CPU 200Mhz

CGN4 = WRT54GS v2.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN5 = WRT54GS v3.0 / BCM5352E Chipset / CPU 200Mhz

CGN6 = WRT54GS v4.0 / BCM5352E Chipset / CPU 200Mhz

CGN7 = WRT54GS v5.0 / the one to stay away from

WRT54GL

CL7A = WRT54GL / BCM5352E Chipset / CPU 200Mhz

Good luck hunting them down.

Another vote for LinkSys. I was disappointed this month when I bought a D-Link 524 Wireless router, I was moving to wireless due too much wires around my room and I got a new desk so I had to do this. Basically my friend gave me his LinkSys BEFW11S4 which is a 802.11B standard wireless device but the card I have is a G card.

The D-Link was giving me a maxium of "Very Low" in signal strength according to windows and my network card software, but then I hooked up this router my friend gave me (old) from LinkSys and god damn I tell you the signal is now at "Excellent" which is the highest level of strength. Funny thing I put both routers in my room to see if its something in the walls that was making it low but still I was getting "Very Low" I was very disappointed and returned the router the day after and stuck with this for now until I can afford a new Linksys G router.

You will have to inspect each box at the store for the right serial numbers. I tried every where and all i

could find were V-5s. I ended up buying a WRT54GL and flashing it with HYPERWRT, wich will get you

speedbooster. NCIX has them in stock.

WRT54GS

CGN0 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN1 = WRT54GS v1.0 / ADM6996L Chipset / CPU 200Mhz

CGN2 = WRT54GS v1.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN3 = WRT54GS v2.0 / BCM5325EKQM Chipset / CPU 200Mhz

CGN4 = WRT54GS v2.1 / BCM5325EKQM Chipset / CPU 200Mhz

CGN5 = WRT54GS v3.0 / BCM5352E Chipset / CPU 200Mhz

CGN6 = WRT54GS v4.0 / BCM5352E Chipset / CPU 200Mhz

CGN7 = WRT54GS v5.0 / the one to stay away from

WRT54GL

CL7A = WRT54GL / BCM5352E Chipset / CPU 200Mhz

Good luck hunting them down.

thnx for all ur help guys, I just got the Linksys Wireless G Broadband Router with SpeedBoost and the Notebook Adapter with SpeedBoost.

didn't take me long to find the one with the CGN6 S/N :) but the sales person was looking at me funny :rofl:

now can some1 tell me more about this firmware updates or hook me up with a link.

thnx again,

X@vier

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The proportion (or number of iterations) has nothing to with this aspect of Copyright I am describing. In short, it doesn't matter how many times the manager tells you to change something or how. Your work product is always YOURS until and unless you then assign that to the person representing the client/company, usually for financial compensation -- either in salary or as a subcontract work for hire payment. if iterations determined copyright, then businesses would have learned to just keep making changes until they could claim they owned the copyright, without having to compensate the artist for their work. And that would be BAD. The only place where the amount of changes does have a role is in how much does a human modify a previous public domain work (from any source) before it is considered fair use or their own work, etc. For example, if a human makes substantial changes to a public domain (re: AI, by definition) work, then they can then claim that derivative work as their own...but NEVER the original version, of course. That's why anyone can make a movie about Dracula, for example, as long as it is based on the public domain novel, but not if they take new ideas from copyrighted movies made afterwards. As one of the people who personally advised the US Copyright Office on their recent ruling on these very issues, be assured that I specifically used the terminology precisely -- though I made it simple enough for laymen to understand it. If I made this confusing by doing so, I apologize. But, to be clear regarding your assumption that I would agree to your second statement that I quoted above -- the answer is NO. If AI does the work, no matter how much "direction" you give it, it cannot be copyrighted. All AI generated content is in the Public Domain and therefore the copyright cannot be assigned to ANYONE, even you -- until and unless substantial modifications are made to it BY A HUMAN BEING (yourself or a contracted artist/writer/etc.) and then that copyright on the derivative work is legally (in writing) transferred to you. This is a critical distinction. And it is important that people, especially AI sloppers, understand this. For example, YouTube is not paying AI slop generators for the copyright, etc. of their AI slop. What YouTube is doing is sharing AD REVENUE for permission to publish your AI slop. Copyright/ownership/rights never come into it. Importantly, that means that anyone can copy any AI slopware on YouTube, etc. and rehost it anywhere they want, even back on YouTube, and there is nothing legal that YouTube can do about it with regards to copyright protections, ownership, DMCA, etc. Anyone is legally free to use any AI slopware in any way they want. When this ruling was pending, I warned Disney legal of all of this before they did their OpenAI deal -- that it would literally dilute their entire IP portfolio forever. They ignored that warning for the PR and stock bump. But that is why, when the ruling came down last year, Disney quickly extricated themselves from that OpenAI deal, even eating the initial upfront fees -- followed closely by OpenAI ending their entire AI video generating business model. They adjusted their PR release dates to make this less obvious to shareholders, of course. Phew. I hope that this clears up the key distinctions for you and anyone reading. If you have any additional questions or even hypotheticals about AI and Copyright, please feel free to ask.
    • Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. About time.
    • Owing to the nature of Windows feature enablement updates, it was distributed over Windows Update services as a complete system upgrade rather than as an ordinary cumulative update
    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      576
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      79
    4. 4
      PsYcHoKiLLa
      78
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!