Cannot boot Windows server 2003


Recommended Posts

I use to have XP SP1 on my old machine, I thought id put Windows Server 2003 onto it and link it up to my new computer. I wiped the hard drive using Drive Scrubber. Then I inserted the Windows server 2003 SP1 disk into the drive and select boot from CD-ROM in the bios settings. It begins pre-installation and for some weird reason XP SP2 Boot screen appears, after that it goes into the Windows Server set up, command prompt opens and "Factory-PE.exe" runs. Then command prompt remains open and nothing happens. Please not this is a OEM CD :(

Link to comment
https://www.neowin.net/forum/topic/451954-cannot-boot-windows-server-2003/
Share on other sites

  bobbba said:

Why not just go back to XP?

I dont have clue how to reformat the drive. When it stays on Command Prompt it says:

"X:\I386\system32>factory -winpe"

"X:\I386\system32>"

The reason I wanted Windows Server onto it was just to mess around since I am hoping to get a job in IT later in life. :o

Get through to the partitioning stage of Win 2003 setup cd-rom. Select the partition you want to install to and press d. Follow the instructions until you have got rid of the partition and got "Unallocated Space". Select the large amount of allocated space and press enter, then choose NTFS Quick. hopefully it will then work

  simsie said:

Get through to the partitioning stage of Win 2003 setup cd-rom. Select the partition you want to install to and press d. Follow the instructions until you have got rid of the partition and got "Unallocated Space". Select the large amount of allocated space and press enter, then choose NTFS Quick. hopefully it will then work

The installation doesnt get that far. Here is the order and what happens:

1. Bios boots

2. Press any key to boot from CD-ROM

3. Pre-installation of Windows environment

4. XP Boot screen

5. Command prompt opens

6. "X:\I386\system32>factory -winpe" automatically runs

6. Factory -winpe finishes and command prompt remains open

7. "X:\I386\system32>" stays on the command prompt

That is all what happens.

where did you get this CD? Is it some kind of trial CD? Are you sure there is not another CD in your machine in another CD/DVD drive?

I can tell you this - No 2k3 server CD from MS boots with "Factory -winpe" anything..

Either your not booting what you think your booting.. ie some other CD or some kind of recovery partition on the hard drive.. Or that is not a CD from MS.

  Viper101 said:

The installation doesnt get that far. Here is the order and what happens:

1. Bios boots

2. Press any key to boot from CD-ROM

3. Pre-installation of Windows environment

4. XP Boot screen

5. Command prompt opens

6. "X:\I386\system32>factory -winpe" automatically runs

6. Factory -winpe finishes and command prompt remains open

7. "X:\I386\system32>" stays on the command prompt

That is all what happens.

it sounds like you have an OEM version of Windows 2003.

OEM companies add stuff to the Windows CDs to better fit their needs and their customers needs.

sounds like this OEM CD that you have is using other parameters and scripts that the OEM company has put in place. These scripts and parameters are designed for specific hardware. If you are not using the original OEM computer/server with this OEM CD, then it will most likely fail.

At my organization, I have created an "OEM" windows xp dvd that is designed to work only with our hardware.

OEM Companies (like Dell, IBM, etc), use their own OEM CDs (even for Windows 2003 server) that work with certain hardware configurations. The CDs look official but are designed only for their computer systems.

hope this isnt too confusing.

  metalguy90 said:

it sounds like you have an OEM version of Windows 2003.

OEM companies add stuff to the Windows CDs to better fit their needs and their customers needs.

sounds like this OEM CD that you have is using other parameters and scripts that the OEM company has put in place. These scripts and parameters are designed for specific hardware. If you are not using the original OEM computer/server with this OEM CD, then it will most likely fail.

At my organization, I have created an "OEM" windows xp dvd that is designed to work only with our hardware.

OEM Companies (like Dell, IBM, etc), use their own OEM CDs (even for Windows 2003 server) that work with certain hardware configurations. The CDs look official but are designed only for their computer systems.

hope this isnt too confusing.

Thanks for making it a lot clearer. It is a OEM disk. Came in a seal Microsoft box with security seals.

It worked fine on VMWare. Ive digged out an old 98 recovery disk and restored the Boot record and partition table. Im going try to format the hard drive and see if that makes any different.

Cheers

  Viper101 said:

Thanks for making it a lot clearer. It is a OEM disk. Came in a seal Microsoft box with security seals.

that sounds odd?

most OEMs CDs dont have much Microsoft branding on it, but their own.

ie. Dell would make the OEM CD look like a Dell CD.

the last company i worked for bought Dell servers and all their disks were blue & white.

the company i work for now uses IBM servers, and their disks are white & black; even though both OEM CDs are Microsoft Windows 2003 server, they both looked like IBM or Dell CDs

hmmm reading your post after mine reminded me of a problem i once had installing server 2003 on a client machine. If the 2003 is booting ok but its not loading the files or appears to be stuck it indicates a hardware problem. In my case i solved it by replacing the cd drive and the PATA cable but it also could be due to faulty ram. Download microsoft memory tester from another pc and save it to floppy and run the floppy disk. If the ram is fine then more than likely its the cd drive or the hard drive. You just have to elimante each component until you find the problem. :) also as mentioned already it could be because its an oem cd. Try downloading the 120 day trial from Microsoft and burn it to a cd and see if that installs.

  andy2004 said:

hmmm reading your post after mine reminded me of a problem i once had installing server 2003 on a client machine. If the 2003 is booting ok but its not loading the files or appears to be stuck it indicates a hardware problem. In my case i solved it by replacing the cd drive and the PATA cable but it also could be due to faulty ram. Download microsoft memory tester from another pc and save it to floppy and run the floppy disk. If the ram is fine then more than likely its the cd drive or the hard drive. You just have to elimante each component until you find the problem. :) also as mentioned already it could be because its an oem cd. Try downloading the 120 day trial from Microsoft and burn it to a cd and see if that installs.

I downloaded the trial version of Windows Server 2003. I burned it onto a CD-ROM, inserted it into the CD-ROM drive and error messege occured "Invalid System Disk". I dont think that RAM is damaged as XP was working fine before. The only thing I can think of is the Hard drive. I think im going buy a 80GB hard drive, to see if that will work. Il let you know how it goes.

Cheers

  Viper101 said:

I brought a new 80GB Hard drive, fitted it and tried installing Server 2003, however still no luck. This is just one big headache! :blink:

Yeah cuz installing a OS is just so hard.. How does a CD not booting point you to a hard drive issue? The CDrom could boot without a Hard Drive in the system..

When you say you burned the trial download to a CD? I'm guessing you have a CD with trial2003.iso on it - and can not figure out why id doesn't boot ;)

If you can not figure out how to burn a ISO.. have them send you a trial..

  • 2 weeks later...

:cool:

He's not using a real Microsoft WIN 2003 disk. I've installed many OS's and W2K3 never acts like that...

I've heard of some of these "so-called good deal" disks and most simply do not work...

Recommend he get his money back...if he can!

Ozz~ :alien:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • AMD preps Ryzen 9600X3D for those who want a taste of the fastest gaming CPU for cheap by Sayan Sen AMD desktop processors are available across two platforms: socket AM4 and socket AM5. Both of these sockets are still going pretty strong, and the company is offering deals and discounts for both as it continues to release new SKUs for its older platform. For example, the company launched an affordable X3D processor for AM4 this month with the new 5500X3D. These gaming CPUs from AMD have been a massive success, as both AM4 and AM5 X3D chips are quite popular among gamers, and for good reason, too. They are fast, very fast. The massive chunk of vertical 3D stacked last-level cache (LLC) Level 3 cache helps these processors a ton in scenarios such as gaming. In our Ryzen 9 9950X3D review, we saw that 300+ frames per second are possible depending on the game title. While we did not review the 8-core 9800X3D, it has been found to be even slightly faster than the 9950X3D and is currently the most powerful gaming CPU on the planet. The Ryzen 9 9800X3D is selling these days for around $440-$500, and that may still be out of budget for many users. As such, similar to the 5600X3D, which is a 6-core 5000X3D processor cut down from the 8-core 5800X3D, AMD is planning to launch a hexacore Ryzen 5 9600X3D that will have two cores disabled compared to the 9800X3D. The information has been uncovered from the recent system integrator (SI) graphics driver for the recently launched Radeon AI PRO R9700 discrete GPU. The driver (Windows SI Driver for Radeon AI PRO R9700, Version 25.10.13.01) confirms the existence of 9600X3D as well as a 9600 non-X SKU and several other Ryzen PRO 9000 CPUs. The full list of upcoming CPUs is given below: Ryzen 5 9600X3D Ryzen 5 9600 AMD Ryzen 9 PRO 9945 Ryzen 7 PRO 9745 Ryzen 5 PRO 9645 Ryzen 5 PRO 9400 In terms of specs, the core configuration of the 9600X3D will be identical to the Ryzen 9600X and 9600, barring things like clock speeds. However, the six-core X3D will have a lot more L3 cache at 96 MB vs 32 MB on the 9600X and 9600. There is no information on pricing at the moment. Source: AMD (spotted by Mellodic Warrior on X)
    • With the dwindling number of TV license payers the BBC has to look for alternative avenues for income.
    • Bet they remove some sound card, wifi and bluetooth drivers that are still used today in some prebuilts. Seen some very old drivers still being used for those components. Printers can be bad also with very outdated but still working drivers.
    • If its anything like the TV licence they will send a few men around knocking and a letter every week saying they will take you to court.
  • Recent Achievements

    • Week One Done
      Crunchy6 earned a badge
      Week One Done
    • One Month Later
      KynanSEIT earned a badge
      One Month Later
    • One Month Later
      gowtham07 earned a badge
      One Month Later
    • Collaborator
      lethalman went up a rank
      Collaborator
    • Week One Done
      Wayne Robinson earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      680
    2. 2
      ATLien_0
      275
    3. 3
      Michael Scrip
      221
    4. 4
      +FloatingFatMan
      170
    5. 5
      Steven P.
      163
  • Tell a friend

    Love Neowin? Tell a friend!