Cannot boot Windows server 2003


Recommended Posts

I use to have XP SP1 on my old machine, I thought id put Windows Server 2003 onto it and link it up to my new computer. I wiped the hard drive using Drive Scrubber. Then I inserted the Windows server 2003 SP1 disk into the drive and select boot from CD-ROM in the bios settings. It begins pre-installation and for some weird reason XP SP2 Boot screen appears, after that it goes into the Windows Server set up, command prompt opens and "Factory-PE.exe" runs. Then command prompt remains open and nothing happens. Please not this is a OEM CD :(

Link to comment
https://www.neowin.net/forum/topic/451954-cannot-boot-windows-server-2003/
Share on other sites

  bobbba said:

Why not just go back to XP?

I dont have clue how to reformat the drive. When it stays on Command Prompt it says:

"X:\I386\system32>factory -winpe"

"X:\I386\system32>"

The reason I wanted Windows Server onto it was just to mess around since I am hoping to get a job in IT later in life. :o

Get through to the partitioning stage of Win 2003 setup cd-rom. Select the partition you want to install to and press d. Follow the instructions until you have got rid of the partition and got "Unallocated Space". Select the large amount of allocated space and press enter, then choose NTFS Quick. hopefully it will then work

  simsie said:

Get through to the partitioning stage of Win 2003 setup cd-rom. Select the partition you want to install to and press d. Follow the instructions until you have got rid of the partition and got "Unallocated Space". Select the large amount of allocated space and press enter, then choose NTFS Quick. hopefully it will then work

The installation doesnt get that far. Here is the order and what happens:

1. Bios boots

2. Press any key to boot from CD-ROM

3. Pre-installation of Windows environment

4. XP Boot screen

5. Command prompt opens

6. "X:\I386\system32>factory -winpe" automatically runs

6. Factory -winpe finishes and command prompt remains open

7. "X:\I386\system32>" stays on the command prompt

That is all what happens.

where did you get this CD? Is it some kind of trial CD? Are you sure there is not another CD in your machine in another CD/DVD drive?

I can tell you this - No 2k3 server CD from MS boots with "Factory -winpe" anything..

Either your not booting what you think your booting.. ie some other CD or some kind of recovery partition on the hard drive.. Or that is not a CD from MS.

  Viper101 said:

The installation doesnt get that far. Here is the order and what happens:

1. Bios boots

2. Press any key to boot from CD-ROM

3. Pre-installation of Windows environment

4. XP Boot screen

5. Command prompt opens

6. "X:\I386\system32>factory -winpe" automatically runs

6. Factory -winpe finishes and command prompt remains open

7. "X:\I386\system32>" stays on the command prompt

That is all what happens.

it sounds like you have an OEM version of Windows 2003.

OEM companies add stuff to the Windows CDs to better fit their needs and their customers needs.

sounds like this OEM CD that you have is using other parameters and scripts that the OEM company has put in place. These scripts and parameters are designed for specific hardware. If you are not using the original OEM computer/server with this OEM CD, then it will most likely fail.

At my organization, I have created an "OEM" windows xp dvd that is designed to work only with our hardware.

OEM Companies (like Dell, IBM, etc), use their own OEM CDs (even for Windows 2003 server) that work with certain hardware configurations. The CDs look official but are designed only for their computer systems.

hope this isnt too confusing.

  metalguy90 said:

it sounds like you have an OEM version of Windows 2003.

OEM companies add stuff to the Windows CDs to better fit their needs and their customers needs.

sounds like this OEM CD that you have is using other parameters and scripts that the OEM company has put in place. These scripts and parameters are designed for specific hardware. If you are not using the original OEM computer/server with this OEM CD, then it will most likely fail.

At my organization, I have created an "OEM" windows xp dvd that is designed to work only with our hardware.

OEM Companies (like Dell, IBM, etc), use their own OEM CDs (even for Windows 2003 server) that work with certain hardware configurations. The CDs look official but are designed only for their computer systems.

hope this isnt too confusing.

Thanks for making it a lot clearer. It is a OEM disk. Came in a seal Microsoft box with security seals.

It worked fine on VMWare. Ive digged out an old 98 recovery disk and restored the Boot record and partition table. Im going try to format the hard drive and see if that makes any different.

Cheers

  Viper101 said:

Thanks for making it a lot clearer. It is a OEM disk. Came in a seal Microsoft box with security seals.

that sounds odd?

most OEMs CDs dont have much Microsoft branding on it, but their own.

ie. Dell would make the OEM CD look like a Dell CD.

the last company i worked for bought Dell servers and all their disks were blue & white.

the company i work for now uses IBM servers, and their disks are white & black; even though both OEM CDs are Microsoft Windows 2003 server, they both looked like IBM or Dell CDs

hmmm reading your post after mine reminded me of a problem i once had installing server 2003 on a client machine. If the 2003 is booting ok but its not loading the files or appears to be stuck it indicates a hardware problem. In my case i solved it by replacing the cd drive and the PATA cable but it also could be due to faulty ram. Download microsoft memory tester from another pc and save it to floppy and run the floppy disk. If the ram is fine then more than likely its the cd drive or the hard drive. You just have to elimante each component until you find the problem. :) also as mentioned already it could be because its an oem cd. Try downloading the 120 day trial from Microsoft and burn it to a cd and see if that installs.

  andy2004 said:

hmmm reading your post after mine reminded me of a problem i once had installing server 2003 on a client machine. If the 2003 is booting ok but its not loading the files or appears to be stuck it indicates a hardware problem. In my case i solved it by replacing the cd drive and the PATA cable but it also could be due to faulty ram. Download microsoft memory tester from another pc and save it to floppy and run the floppy disk. If the ram is fine then more than likely its the cd drive or the hard drive. You just have to elimante each component until you find the problem. :) also as mentioned already it could be because its an oem cd. Try downloading the 120 day trial from Microsoft and burn it to a cd and see if that installs.

I downloaded the trial version of Windows Server 2003. I burned it onto a CD-ROM, inserted it into the CD-ROM drive and error messege occured "Invalid System Disk". I dont think that RAM is damaged as XP was working fine before. The only thing I can think of is the Hard drive. I think im going buy a 80GB hard drive, to see if that will work. Il let you know how it goes.

Cheers

  Viper101 said:

I brought a new 80GB Hard drive, fitted it and tried installing Server 2003, however still no luck. This is just one big headache! :blink:

Yeah cuz installing a OS is just so hard.. How does a CD not booting point you to a hard drive issue? The CDrom could boot without a Hard Drive in the system..

When you say you burned the trial download to a CD? I'm guessing you have a CD with trial2003.iso on it - and can not figure out why id doesn't boot ;)

If you can not figure out how to burn a ISO.. have them send you a trial..

  • 2 weeks later...

:cool:

He's not using a real Microsoft WIN 2003 disk. I've installed many OS's and W2K3 never acts like that...

I've heard of some of these "so-called good deal" disks and most simply do not work...

Recommend he get his money back...if he can!

Ozz~ :alien:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Weekend PC Game Deals: Total War grabs, management freebies, demos to try, and more by Pulasthi Ariyasinghe Weekend PC Game Deals is where the hottest gaming deals from all over the internet are gathered into one place every week for your consumption. So kick back, relax, and hold on to your wallets. The Humble Store brought out a couple of fresh bundles this week, and up first is the Narrative Arc collection. This comes with Mutazione, Venba, and Frank and Drake in the starting tier with an $8 price tag. Going up a rung will cost you $14, and this adds on Season: A Letter to the Future and Dustborn. Lastly, paying $20 gets you Harold Halibut and Six Ages 2: Lights Going Out. Next, the Case and Consequences Collection landed. This bundle comes with Heavy Rain, Song of Farca, Lacuna, and Sherlock Holmes: Crimes and Punishments in the starting tier for $6. The second and final tier of this bundle costs $10, adding on Murders on the Yangtze River, BROK the InvestiGator, and Between Horizons. Both bundles will come to an end two weeks from now, so you have plenty of time to decide. The Epic Games Store's mystery giveaways came to an end this week, but the standard promotion has already returned, touting a freebie from Sega. The Two Point Studios-developed construction and sim experience Two Point Hospital is now yours to claim. Arriving as a spiritual successor to the classic title Theme Hospital, this also offers a humorous take on hospital management and patient treatment. You'll be creating treatment rooms, hiring doctors, and taking care of financials, all the while patients with the wildest illnesses pass through looking for cures. The Two Point Hospital giveaway will last until Thursday, June 19. This is also when The Operator will become the next free game on the platform. Free Events The demo festival that Valve hosts three times a year, Steam Next Fest, is back with a brand-new selection of games to try out. This promotion is slated to last until June 16, giving you just a few more days to try out gameplay slices from upcoming games. Several standard free events are currently active too. This includes the colony sim Stardeus, the dungeon-crawler roguelite Barony, the WW2-set hardcore first-person shooter Hell Let Loose, the building and management sim Construction Simulator, as well as the side-scrolling looter brawler Towerborne. Big Deals The Steam Summer Sale is just days away, but plenty of publishers already having big promotions on their games. This includes a Total War historical sale, Konami classics, 505's early summer promotions, and others. With those and more, here's our hand-picked big deals list for this weekend: SILENT HILL 2 – $41.99 on Steam Forza Horizon 5 – $29.99 on Steam Hell Let Loose – $24.99 on Steam Wasteland 3 – $19.99 on Steam Resident Evil 4 – $19.99 on Steam Metro Awakening – $19.99 on Steam Halo Infinite (Campaign) – $19.79 on Steam Mind Over Magic – $18.74 on Steam Castlevania Dominus Collection – $17.49 on Steam DEATH STRANDING DIRECTOR'S CUT – $15.99 on Steam Blasphemous 2 – $14.99 on Steam Grand Theft Auto V Enhanced – $14.99 on Steam Total War: THREE KINGDOMS – $14.99 on Steam Total War: ROME II - Emperor Edition – $14.99 on Steam DRAGON BALL Z: KAKAROT – $12.99 on Gamesplanet DREDGE – $12.49 on Steam Fable Anniversary – $12.24 on Steam METAL GEAR SOLID V: The Definitive Experience – $11.99 on Steam Total War: ROME REMASTERED – $10.19 on Steam Pillars of Eternity II: Deadfire – $9.99 on Steam Bloodstained: Ritual of the Night – $9.99 on Steam Ghostrunner 2 – $9.99 on Steam METAL GEAR SOLID 3: Snake Eater - Master Collection Version – $9.99 on Steam METAL GEAR SOLID 2: Sons of Liberty - Master Collection Version – $9.99 on Steam Barony – $9.99 on Steam Total War: PHARAOH – $9.99 on Steam DRAGON BALL FighterZ – $9.59 on Steam Deep Rock Galactic: Survivor – $9.09 on Steam The Callisto Protocol – $8.99 on Steam Quantum Break – $7.99 on Steam Oxygen Not Included – $7.49 on Steam The Ascent – $7.49 on Steam Ghostrunner – $7.49 on Steam Total War: SHOGUN 2 – $7.49 on Steam Overcooked! 2 – $6.24 on Steam Human Fall Flat – $5.99 on Steam Grand Theft Auto IV: The Complete Edition – $5.99 on Steam Don't Starve Together – $5.09 on Steam Last Day of June – $4.99 on Steam ABZU – $4.99 on Steam Super Meat Boy Forever – $4.99 on Steam Total War: MEDIEVAL II – Definitive Edition – $4.99 on Steam Legend of Grimrock 2 – $4.79 on Steam Golf With Your Friends – $4.49 on Steam Rise of the Tomb Raider – $4.49 on Steam Golf It! – $4.49 on Steam Sunset Overdrive – $3.99 on Steam Super Meat Boy – $3.74 on Steam Tomb Raider – $2.24 on Steam Crime Boss: Rockay City – $1.99 on Steam Mortal Shell – $1.49 on Steam Crypt of the NecroDancer – $1.49 on Steam This War of Mine – $0.99 on Steam Two Point Hospital – $0 on Epic Store DRM-free Specials The DRM-free discounts from the GOG store this weekend include open-world adventures, story-rich titles, indies, publisher sales, and more. Here are some highlights: No Man's Sky - $23.99 on GOG The Thaumaturge - $19.24 on GOG INDIKA - $16.24 on GOG Against the Storm - $14.99 on GOG Shadows of Doubt - $14.99 on GOG EVERSPACE 2 - $14.99 on GOG Core Keeper - $13.99 on GOG art of rally - $12.49 on GOG Shadowrun Trilogy - $10.07 on GOG Cold Waters - $9.99 on GOG Disco Elysium - The Final Cut - $9.99 on GOG Streets of Rage 4 - $9.99 on GOG Dying Light: The Following – Enhanced Edition - $8.99 on GOG Potion Craft: Alchemist Simulator - $7.99 on GOG Little Nightmares - $4.99 on GOG Edge Of Eternity - $4.49 on GOG Epistory - Typing Chronicles - $4.49 on GOG This War of Mine: Complete Edition - $4.07 on GOG Graveyard Keeper - $3.99 on GOG Alba: A Wildlife Adventure - $3.39 on GOG Chroma Squad - $2.24 on GOG EVERSPACE - $0.99 on GOG Keep in mind that availability and pricing for some deals could vary depending on the region. That's it for our pick of this weekend's PC game deals, and hopefully, some of you have enough self-restraint not to keep adding to your ever-growing backlogs. As always, there are an enormous number of other deals ready and waiting all over the interwebs, as well as on services you may already subscribe to if you comb through them, so keep your eyes open for those, and have a great weekend.
    • I've had the opposite honestly Linux always just works except for games with drm/anti cheat Windows is sometimes corrupted on first install Windows update downloading wrong drivers ...
    • Microsoft 365 Copilot Notebooks now integrated in OneNote on Windows by Paul Hill Microsoft has announced that Enterprise customers with Microsoft 365 Copilot, SharePoint, or OneDrive licenses can now use Microsoft 365 Copilot Notebooks integrated directly with OneNote on Windows. Copilot Notebooks are AI-powered and bring together different resources such as Copilot Chat, files, notes, and links into a single space to make you more productive. The Redmond giant wants to make it easier for customers to gather content, understand complex topics, and create “smarter content” with Copilot Notebooks. This integration is squarely aimed at Enterprise customers, not Personal or Family subscribers. How Copilot Notebooks enhance productivity in OneNote When you open OneNote on Windows, you should see Copilot Notebooks in the left-hand sidebar, from here you can view or edit existing notebooks or you can create one by going to Home > Create Copilot Notebook or New notebook. During the creation of your new notebook, you can give it a name and add references such as OneNote pages, .docx, .pptx, .xlsx, .pdf, or .loop files. This gives Copilot extra context to provide you with more refined answers. Once you have created a notebook and added your reference documents, you can use Copilot Notebooks to help you gather insights from your documents, draft summaries, and generate audio overviews. An important caveat to mention about these notebooks is that you can only add 20 files as references and only individual OneNote pages, as opposed to sections and notebooks, can be added. Microsoft could add support for these in the future, but you can’t add them yet. Another limitation right now is that some OneNote features aren’t functional within Copilot Notebooks, including tags, section groups, inking, templates, password protection, Immersive Reader, and offline support. Availability and what it means for enterprise users Microsoft 365 Copilot Notebooks in OneNote for Windows are available for Enterprise customers with an appropriate license (anyone with a Microsoft 365 Copilot, SharePoint, or OneDrive license) running OneNote Version 2504 (Build 18827.20128) or later. If you have any other feedback to give to Microsoft, you can give it via Help > Feedback. As an Insider preview, Microsoft will likely improve this before declaring it stable so let Microsoft know of any issues you have. Now that the feature is available as a preview, it’s the perfect time for IT admins and other decision-makers to evaluate the feature to see how it could benefit their wider organization.
    • Mixxx 2.5.2 by Razvan Serea Mixxx is powerful, free, and open-source DJ software designed for both beginners and professionals. It offers real-time beatmatching, auto DJ, effects, and MIDI controller support. With a clean interface and compatibility across Windows, macOS, and Linux, Mixxx is ideal for live performances, radio broadcasts, or practice sessions. Its active community and constant updates make it a reliable tool for any DJ. Mixxx integrates the tools DJs need to perform creative live mixes with digital music files. Whether you are a new DJ with just a laptop or an experienced turntablist, Mixxx can support your style and techniques of mixing. Mixxx key features: Realtime audio engine with low-latency performance MIDI and HID controller mapping with customizable scripting (JavaScript-based) Vinyl DVS support (absolute & relative timecode modes) OpenSL, ASIO, WASAPI, and JACK audio backend support Advanced BPM & musical key detection (KeyFinder integration) Quantized beat sync and phase locking Effect chain routing with LADSPA plugin support 4-deck mixing with independent EQ and gain control Support for wide file formats (MP3, FLAC, OGG, WAV, AIFF) Broadcasting via Icecast and Shoutcast with metadata support Library with Crate, Playlist, and Smart Playlist organization Multi-core CPU support for performance optimization Microphone and Auxiliary input routing with talkover ducking OSC and Web MIDI support Skinnable and themable Qt-based UI Cue points, hotcues, and looping with quantization Recording in lossless WAV or compressed formats Clock-synced looping and beatjump Mixxx 2.5.2 changelog: Library Fix playlist export when name contains a dot Fix loading the wrong track via drag and drop when using symlinks Fix: byte order in hotcue comments imported from rekordbox Tracks table: show ReplayGain with max. 2 decimals, full precision in tooltip Fix keyboard mappings with non-ASCII characters on Linux Computer feature: enable initial sorting during population Computer feature: avoid false-positve 'has children' for non-directory links Fix column header mapping when using external library Fixed Single track cover reload on reload metadata from file Controller Mappings Arturia KeyLab Mk1: initial mapping Denon MC7000: slicer mode TypeError Denon MC7000: crossfader curve using wrong parameter DJ TechTools MIDI Fighter Twister: support 4 decks Hercules DJControl Inpulse 500: the crossfader was not reaching 100% to the right end Icon Pro Audio iControls: initial mapping Numark Mixtrack Platinium FX: Fix 4 steps browsing issue Traktor Kontrol S3: Use GUI config for settings Traktor S2 MK3: Fixed LED issue Traktor S4 MK2: Use engine settings API for configuration Traktor S4 MK3: prevent sync lockup, add setting for tempo center snap Controller Backend Control picker: Allow to learn MIDI Aux/Mic enable controls Make [Main],headSplit CO persistent across restart Fix MIDI Controller button learning Fix learning with "No Mapping" selected Unit tests for engine.beginTimer engine-api.d.ts: brake()/spinback() documentation Target support Fix building with a CMake multi-config setup Fix building with gcc >= 14 with LTO and clang >= 19 (fpclassify) Fix: gcc -Warray-bounds= in fidlib by using a flexible member Added Linux Mint Codenames to debian_buildenv.sh Add hidden [Config],notify_max_dbg_time setting to reduce warnings in developer mode Detect arch and fail early if not supported when installing buildenv Misc Vinyl Control: Reduce sticker drift Fix infinite number of pop ups of the "No Vinyl|Mic|Aux|Passthrough input configured" dialog Reduce CPU usage with Trace log messages Fix adjust Gain after adopting it as ReplayGain only in requesting playe Skins: add loop anchor toggle to Deere, Shade, Tango Sound Hardware preferences: add manual link for Mic monitoring modes Work around an Ubuntu, Ibus or Qt issue regarding detecting the current keyboard layout. Fix BPM rounding for the 3/2 case Update cue & play indicators on paused decks when switching cue mode Download: Mixxx 2.5.2 | 113.0 MB (Open Source) Links: Mixxx Home page | Other OSes | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      5i3zi1 earned a badge
      One Month Later
    • Week One Done
      5i3zi1 earned a badge
      Week One Done
    • Week One Done
      julien02 earned a badge
      Week One Done
    • One Year In
      Drewidian1 earned a badge
      One Year In
    • Explorer
      Case_f went up a rank
      Explorer
  • Popular Contributors

    1. 1
      +primortal
      543
    2. 2
      ATLien_0
      227
    3. 3
      +FloatingFatMan
      159
    4. 4
      Michael Scrip
      113
    5. 5
      +Edouard
      96
  • Tell a friend

    Love Neowin? Tell a friend!