NFS MW : Post U'r Tuning On Lotus Elias


Recommended Posts

Hello to all NFS fanatics :D

Are u ready for the upcoming WCG 2006 ? :) Here, I want to share my car tuning and my WCG 2006 Lap records. Please feel free to share with me. :) I'm using Lotus Elise without 'Junkman' performance parts and N20. These r my settings. :)

1) +3

2) +2

3) +3

4)-3

5)+2

6) 0

7)+5

Heritage Height : 1:17 [best Lap Time]........ 1:24 [1st Lap] Not good. :)

U have to use Lotus Elise. Can do better than this ? :D

Edited by The One!
Link to comment
https://www.neowin.net/forum/topic/453468-nfs-mw-post-ur-tuning-on-lotus-elias/
Share on other sites

I don't get the point of this as everyone will have different racing styles, and therefore different settings...

The idea is to build the car to fit your driving. Some like cars tight some like cars loose. I have mine more on the loose side, And to have a car more loose or more tight we have to drop the engines performance a bit so we don't lose traction speed when the engine super rev's after we leave a sharp curve of intersection.

Lots of people seem to think cars should be all pumped up with every max-performance part to make the fastest car. Sure it is fast. Like the Porsche Carrera GT after it loses control it would just sit there spinning its tires, engine is screaming with power and going no wheres as we all pass it with our bazoo's lol

NFSMW is not just a car game that we build it - race it cars like other Race games. There is a logic in what parts to uses.

Example: I bet 99% of the people will put 20 inch tires on a Renault Clio. Well this is not logical. The car will take 3 KM to get to top speed. Now try and put 18 inch tires and see what happens. You will see the difference.

Edited by NFSMechMan

'NFSMechMan' u do have some good pionts. :) thxz for u'r comments. Can u find out the best settings for the WCG 2006 tracks ? Heritage Height, Dunwich Bay, Diamond, East Park and Bay Bridge using Lotus. :) One of my frined's buddy did 1:11 on HH but i did 1:16 with my settings. :(

  • 2 weeks later...
  • 2 weeks later...

Example: I bet 99% of the people will put 20 inch tires on a Renault Clio. Well this is not logical. The car will take 3 KM to get to top speed. Now try and put 18 inch tires and see what happens. You will see the difference.

What about other parts like the spoilers, hoods, roof scopes? Does carbon fibre affect the performance of the car or are they just for display?

One of my frined's buddy did 1:11 on HH

Wow. Did he use all ultimate performance parts or? I could only do 1:17. Wanna race?

Ok, I have been driving with the Elise for a few hours, and have just started to learn the WCG tracks, as I only got game 2 weeks ago, and completed career this week.

I need help with tuning tricks also ;) But I think I need to get used to this car also....

Atm, after playing around a little bit on Bay Bridge, I am just breaking into 1:12.xx

I got tuning like this atm, but I am NOOB still... I know I can take better lines/braking to get a better time, as I've only pracced for a bit.

Performance -> Max (no junkman), Spoiler, (do any of the "Parts" affect performance other than spoiler?) I couldn't tell with small rims... :huh:

Steering: -4

Handling: +2

Braking: +5

Ride Height: +5

Aerodynamics: +5

Nitrous: 0

Turbo: +5

I think steering is like sensitivity?

Handling is like grip?

Braking is left=rear right=front?

What is Ride Height doing other than whether I bottom out on jumps or not?

Aerodynamic are doing ?

Nitrous isn't needed for WCG.

I think Turbo is how low the revs are when it cuts in vs how much power it gives?

If anyone knows how these settings work/affect driving in the game please post!

Cheers !

See that's what I'd love to have. An online PC / Console game, where people can tune their cars in anyway possible (realistically), where if your cars suspension is to low, and you go over a bump / hill to fast it damages the under carriage therefore decreasing performance if not totalling you're car.

I'd pay **** loads for such a realistic racing game ;_;.

I've once played NFS:MW on and off - but is it really that good?

Thx 'The One' :) , I changed things a bit and got down to 1:11.xx, but If I take the sharp 90? right better and get through the last hairpin after the jump cleanly @ about 140 km/hr, I should drop this to 1:10 easy

Atm I am like this for Bay Bridge: 1:11.xx with not so good driving lines.

Steering: -1

Handling: +2

Braking: 0

Ride Height: +5

Aerodynamics: +5

Nitrous: 0

Turbo: +5

I am still not sure about braking, I get similar with it -5, 0 or +5.

Also, In NFSU2, to get World Records in streetX, I used NO wide body kit, because it made my car narrower, with the same handling, so I could get closer to walls, and "fit through" easier. As far as I can tell so far, the same thing applies in MW. See what you think? Though you need a spoiler on to get the Aerodynamics options.

Tuning seems weird, like surely in real life, if you have a Body Kit and a Spoiler, this would be different to just a Body Kit, or just a Spoiler, but in game it seems as long as you have one or the other or both you get "the tuning option".

I will try yur settings for Diamond 'n see how I go. :))

'The One', I can't drive with yur settings ;)

My time atm for HH is BAD, tho I just started praccing it.

Do you go right or left where the road 1st parts, after the tollbooth? I have been going right. Maybe I should go left then cross over to the right?

Also, near the BurgerKing, where road goes left, I have been going on the far right, but I am not doing it well :p. maybe I should go underneath thru the middle?

So nice to find someone sharing info (Y)

I might try the EVO :D

Hmm how do you guys test the cars on the tracks? o_O I'm able to change performance of the car in the pause menu, but I don't know how to get to the race tracks / circuits?

ok, from the "main menu", where it has Career, Challenge Series, Quick Race, My Cars, LAN Play, Online, etc, Set a car up in "My Cars" with no Junkman parts, escape back to Main Menu, then go to "Quick Race", then right one to "Custom Race", then "Circuit", then pick track by going right or left ( make sure it says "All Reigons" at the bottom, or else click the arrows to show all the tracks), then set 5 laps, no traffic, 1 opponent, etc.., then pick the car you have tuned to WCG rules, and go test it.

A better way, but you need 2 PCs on a lan setup to do it, is to have one PC set up to host a lan server with WCG rules (no collision, no NO2, no traffic, etc), and then join that from yur other PC, this way you have no collision on, and can get used to the feel of a lan, and can't use any NO2, even if you wanted too ;)

You can tune the car from pause menu and then start again to try new tuning out.

I hope you understand. :)

Currently on HH my fastest lap:

1:14.32

Gaah thats frutsrating!! :p

My current tuning is:

+5

+1

+2

-4

-2

+4

+3

As for the first fork, I go left, and then cross to the right :). I also try to go through the right side passage at the bridge instead of dipping down and back up.

Ian.

Thanks for explaining how to do it ; )

1:14 is "decent" man :D . I gather you realize No Nitrous and No Junkman parts for WCG? Also no Porsche GT and no BMW M3.

+5 stering is like, OMG, maybe cus I use a Joystick I need lower steering ? If I use +5 with Lotus, tiniest twitch and I do a 90 degree turn :p

And yur welcome.

Hope I get some time to prac today.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Stop asking people that. It's a "No True Scotsman" argument in that you are attempting to discredit the opinions of a person by Attacking the Messenger. The reason that these are logical fallacies is the TRUTH is based on facts as supported by evidence. Nothing else. So, always debate the facts with evidence to reach the truth. Once you learn to do this, you'll be able to recognize when people are fearmongering and lying to you for their own selfish ends.
    • It doesn't matter if you didn't directly hear it from person X or Y. Every one of your statements comes straight from the racist, skinhead, anti-immigrant, be afraid of everything, "they are all taking our jobs", etc. etc. mouthpieces. That's where Farag and Putin heard it from too...and used it against the UK. So, while you keep disavowing the people who publicly peddled that position, you keep proving over and over again that those lies influenced you into being tricked when the Brexit vote came around too. In fact, your final sentence makes it crystal clear that it was the racist/anti-immigrant lies you fell and voted for, since you stated that you didn't have an issue with the economic trade issues with the EU. Ahem. To be clear, all of these LIES are EONS old, mate. They are the same fearmongering lies peddled to the same ignorant, gullible cowards by the same charlatans, snake-oil salesmen, and would be demagogues who've been doing this since caveman Ugh lied about his slightly different neighbor in order to steal his land. And, finally, you answered your own previous question. The reason that the EU isn't clamoring to bring the UK back is that they have had enough of people who would rather shoot themselves in the foot than get over their "insecurity issues". It's the same reason the entire world is moving away from the USA as fast as it can...
    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      224
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      69
  • Tell a friend

    Love Neowin? Tell a friend!