NFS MW : Post U'r Tuning On Lotus Elias


Recommended Posts

Hello to all NFS fanatics :D

Are u ready for the upcoming WCG 2006 ? :) Here, I want to share my car tuning and my WCG 2006 Lap records. Please feel free to share with me. :) I'm using Lotus Elise without 'Junkman' performance parts and N20. These r my settings. :)

1) +3

2) +2

3) +3

4)-3

5)+2

6) 0

7)+5

Heritage Height : 1:17 [best Lap Time]........ 1:24 [1st Lap] Not good. :)

U have to use Lotus Elise. Can do better than this ? :D

Edited by The One!
Link to comment
https://www.neowin.net/forum/topic/453468-nfs-mw-post-ur-tuning-on-lotus-elias/
Share on other sites

I don't get the point of this as everyone will have different racing styles, and therefore different settings...

The idea is to build the car to fit your driving. Some like cars tight some like cars loose. I have mine more on the loose side, And to have a car more loose or more tight we have to drop the engines performance a bit so we don't lose traction speed when the engine super rev's after we leave a sharp curve of intersection.

Lots of people seem to think cars should be all pumped up with every max-performance part to make the fastest car. Sure it is fast. Like the Porsche Carrera GT after it loses control it would just sit there spinning its tires, engine is screaming with power and going no wheres as we all pass it with our bazoo's lol

NFSMW is not just a car game that we build it - race it cars like other Race games. There is a logic in what parts to uses.

Example: I bet 99% of the people will put 20 inch tires on a Renault Clio. Well this is not logical. The car will take 3 KM to get to top speed. Now try and put 18 inch tires and see what happens. You will see the difference.

Edited by NFSMechMan

'NFSMechMan' u do have some good pionts. :) thxz for u'r comments. Can u find out the best settings for the WCG 2006 tracks ? Heritage Height, Dunwich Bay, Diamond, East Park and Bay Bridge using Lotus. :) One of my frined's buddy did 1:11 on HH but i did 1:16 with my settings. :(

  • 2 weeks later...
  • 2 weeks later...

Example: I bet 99% of the people will put 20 inch tires on a Renault Clio. Well this is not logical. The car will take 3 KM to get to top speed. Now try and put 18 inch tires and see what happens. You will see the difference.

What about other parts like the spoilers, hoods, roof scopes? Does carbon fibre affect the performance of the car or are they just for display?

One of my frined's buddy did 1:11 on HH

Wow. Did he use all ultimate performance parts or? I could only do 1:17. Wanna race?

Ok, I have been driving with the Elise for a few hours, and have just started to learn the WCG tracks, as I only got game 2 weeks ago, and completed career this week.

I need help with tuning tricks also ;) But I think I need to get used to this car also....

Atm, after playing around a little bit on Bay Bridge, I am just breaking into 1:12.xx

I got tuning like this atm, but I am NOOB still... I know I can take better lines/braking to get a better time, as I've only pracced for a bit.

Performance -> Max (no junkman), Spoiler, (do any of the "Parts" affect performance other than spoiler?) I couldn't tell with small rims... :huh:

Steering: -4

Handling: +2

Braking: +5

Ride Height: +5

Aerodynamics: +5

Nitrous: 0

Turbo: +5

I think steering is like sensitivity?

Handling is like grip?

Braking is left=rear right=front?

What is Ride Height doing other than whether I bottom out on jumps or not?

Aerodynamic are doing ?

Nitrous isn't needed for WCG.

I think Turbo is how low the revs are when it cuts in vs how much power it gives?

If anyone knows how these settings work/affect driving in the game please post!

Cheers !

See that's what I'd love to have. An online PC / Console game, where people can tune their cars in anyway possible (realistically), where if your cars suspension is to low, and you go over a bump / hill to fast it damages the under carriage therefore decreasing performance if not totalling you're car.

I'd pay **** loads for such a realistic racing game ;_;.

I've once played NFS:MW on and off - but is it really that good?

Thx 'The One' :) , I changed things a bit and got down to 1:11.xx, but If I take the sharp 90? right better and get through the last hairpin after the jump cleanly @ about 140 km/hr, I should drop this to 1:10 easy

Atm I am like this for Bay Bridge: 1:11.xx with not so good driving lines.

Steering: -1

Handling: +2

Braking: 0

Ride Height: +5

Aerodynamics: +5

Nitrous: 0

Turbo: +5

I am still not sure about braking, I get similar with it -5, 0 or +5.

Also, In NFSU2, to get World Records in streetX, I used NO wide body kit, because it made my car narrower, with the same handling, so I could get closer to walls, and "fit through" easier. As far as I can tell so far, the same thing applies in MW. See what you think? Though you need a spoiler on to get the Aerodynamics options.

Tuning seems weird, like surely in real life, if you have a Body Kit and a Spoiler, this would be different to just a Body Kit, or just a Spoiler, but in game it seems as long as you have one or the other or both you get "the tuning option".

I will try yur settings for Diamond 'n see how I go. :))

'The One', I can't drive with yur settings ;)

My time atm for HH is BAD, tho I just started praccing it.

Do you go right or left where the road 1st parts, after the tollbooth? I have been going right. Maybe I should go left then cross over to the right?

Also, near the BurgerKing, where road goes left, I have been going on the far right, but I am not doing it well :p. maybe I should go underneath thru the middle?

So nice to find someone sharing info (Y)

I might try the EVO :D

Hmm how do you guys test the cars on the tracks? o_O I'm able to change performance of the car in the pause menu, but I don't know how to get to the race tracks / circuits?

ok, from the "main menu", where it has Career, Challenge Series, Quick Race, My Cars, LAN Play, Online, etc, Set a car up in "My Cars" with no Junkman parts, escape back to Main Menu, then go to "Quick Race", then right one to "Custom Race", then "Circuit", then pick track by going right or left ( make sure it says "All Reigons" at the bottom, or else click the arrows to show all the tracks), then set 5 laps, no traffic, 1 opponent, etc.., then pick the car you have tuned to WCG rules, and go test it.

A better way, but you need 2 PCs on a lan setup to do it, is to have one PC set up to host a lan server with WCG rules (no collision, no NO2, no traffic, etc), and then join that from yur other PC, this way you have no collision on, and can get used to the feel of a lan, and can't use any NO2, even if you wanted too ;)

You can tune the car from pause menu and then start again to try new tuning out.

I hope you understand. :)

Currently on HH my fastest lap:

1:14.32

Gaah thats frutsrating!! :p

My current tuning is:

+5

+1

+2

-4

-2

+4

+3

As for the first fork, I go left, and then cross to the right :). I also try to go through the right side passage at the bridge instead of dipping down and back up.

Ian.

Thanks for explaining how to do it ; )

1:14 is "decent" man :D . I gather you realize No Nitrous and No Junkman parts for WCG? Also no Porsche GT and no BMW M3.

+5 stering is like, OMG, maybe cus I use a Joystick I need lower steering ? If I use +5 with Lotus, tiniest twitch and I do a 90 degree turn :p

And yur welcome.

Hope I get some time to prac today.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      459
    2. 2
      +Edouard
      212
    3. 3
      PsYcHoKiLLa
      157
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      69
  • Tell a friend

    Love Neowin? Tell a friend!