How to Burn to 800MB CDR


Recommended Posts

Nowdays people's hunger for space is increasing. People are not satisfied with 700MB CD-R's available in the market. So they go for 800MB CD-R. Burning to 700MB CD and 800MB CD are entirely different tasks.

I will tell you how to burn to 800MB CD-R successfully using Nero 6.6.013

Requirements:

1. A branded 800MB CD-R preferrably Amkette.

2. A writer supporting Overburning. To check whether this feature is supported by your writer go to Recorder Menu and then select Choose Recorder. Now Select your recorder and in the bottom you should look for this on the screen.

Overburn: Supported

3. You need to have the latest firmware for your recorder model, as it will contain information to enable overburning. Most importantly, it will contain read/write strategies for new brands of CD-R and CD-RW media and can resolve many issues you may otherwise run into.

Steps to do:

1. Go to File>>Preferences>>Expert Features and check the box:Enable Disc-at-once CD overburning and set Maximum CD Size as according to given specifications:

For 80 min media set to 82:00

For 90 min media set to 89:30

For 99 min media set to 99:54:74

and now click OK.

2. Now select File>>New and select No Multisession

3. Click on ISO and set Data Mode to Mode 2/XA

Note for here:

Any CD blank with a size over than 80 minutes (about 700 MB) should be recognized as a size-80 minutes CD due to ISO restrictions. This is absolutely normal. As a result, you could never write a multisession CD using more-than-90-minutes CD blank. If you will try to create multisession on such CD, you should be limited with size-80 minutes (or size-700 MB). As an enother result, you should use overburning option to write CD's with capacity of over than 80 minutes.

4. Select Burn and check Write Method: Disc-at-once or Disc-at-once/96. Do not load any application during 90-minutes CD burning and decrease burning speed to 12x to avoid buffer overrun.

Hope you will now be comfortable using 800MB CD-R's but don't overburn regularly. It can sometimes damage your Writer permanently also. Their are several complaints regarding this.

P.S. Writer does not claim responsibility of the success of the above method in every case. I will not be held responsible in case you damage some of your hardware or software while doing this.

Link to comment
https://www.neowin.net/forum/topic/453525-how-to-burn-to-800mb-cdr/
Share on other sites

DVD-R blanks cost about the same as a CD-R, and 800mb CD ISOs can be burnt to DVD-R without a problem too.

Really? Point me a store that sells DVD-R for 20 cents. I have yet to see...

and a CD ISO and a DVD ISO are completely different standards and are not compatible. This guide is mainly for data only. Plus its rather pointless too because Nero 7 (and I suppose Roxio's burning app) automatically detects that you are burning a project over 700MB and will scan the media inserted to see if its a 800 or 900MB disc and enable OverBurn for the drive and burn it as normal.

and plus ive already burnt a cd-rw that can holds 1.75 gb to a cd alerady with the overburn technique

False.

Mainly because OverBurn CD-RW AFAIK dont exist because no site has ever mentioned them and they are rather unstable for OverBurn.

You problably downloaded/ripped illegally a game/VCD which's ISO was over 700mb but burnt perfectly to a disc. That extra info is just some "1010101" crap that takes up space to mainly combat privacy and other useless stuff but Nero ignores it and burns the disc perfectly anyhow.

1.75GB on a CD is only possible when you make duplicate files appear just once in a CD. But such CDs are bad for health of PC and mostly are illegal. So don't fall for trap CDs showing 1.75GB in a 700MB Disc!

BTW you are right rIaHc3.. even in India CDrs are lot cheaper than DVD-Rs.!

Well in Australia, a 100x spindle of Ridata DVD-Rs is $25AUD (25c each) and a 100x spindle of 700MB Ridata CD-Rs is $18.50 (18.5c each) from the swap meet. Not a lot of difference, and the extra 6.5c is worth it for the added reliability (and flexability of burning up to 4.3GB), you'ld probably burn a few coasters before getting this method right.

The ISO 9660 filesystem is used for CD-Rs. ISO 9660 is also fully compatible with DVD-Rs, even though the UDF filesystem is more popular for DVDs.

I have personally burnt ISO 9660 with El Torito ISOs (Bootable CDs) to DVD-RW and it has booted and read perfectly (The software in question was my Unattended Windows XP CD, which was first ripped from the original Windows XP CD before adding the winnt.sif).

Reasons why you would want to burn an 800MB CD-R are if you are burning a CD for someone that might not have a DVD-ROM drive, you are burning system utilities that need to better compatiblity with all PCs that you need it for (your friends/clients might not all have DVD ROM drives) or you are burning it for a CD/MP3 player in your car or stereo (which would not be able to read DVD-Rs)

  • 2 weeks later...

1.75GB on a CD is only possible when you make duplicate files appear just once in a CD. But such CDs are bad for health of PC and mostly are illegal. So don't fall for trap CDs showing 1.75GB in a 700MB Disc!

BTW you are right rIaHc3.. even in India CDrs are lot cheaper than DVD-Rs.!

Sony CD-R costs Rs 20

Sony DVD-R costs Rs 60

Not much considering you get more than 6x of storage.

Moserbaer are much reliable and cheaper. Both CD and DVD's made by them are relatively cheaper if you buy them in large quantities ( say 50 ).

50 CD's costs you $8.33 === storage 35000MB's

20 DVD's costs you $8.88 ==== storage 86016MB's

So if you do the math DVD's are cheaper provided you have a DVD-RW.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • The proportion (or number of iterations) has nothing to with this aspect of Copyright I am describing. In short, it doesn't matter how many times the manager tells you to change something or how. Your work product is always YOURS until and unless you then assign that to the person representing the client/company, usually for financial compensation -- either in salary or as a subcontract work for hire payment. if iterations determined copyright, then businesses would have learned to just keep making changes until they could claim they owned the copyright, without having to compensate the artist for their work. And that would be BAD. The only place where the amount of changes does have a role is in how much does a human modify a previous public domain work (from any source) before it is considered fair use or their own work, etc. For example, if a human makes substantial changes to a public domain (re: AI, by definition) work, then they can then claim that derivative work as their own...but NEVER the original version, of course. That's why anyone can make a movie about Dracula, for example, as long as it is based on the public domain novel, but not if they take new ideas from copyrighted movies made afterwards. As one of the people who personally advised the US Copyright Office on their recent ruling on these very issues, be assured that I specifically used the terminology precisely -- though I made it simple enough for laymen to understand it. If I made this confusing by doing so, I apologize. But, to be clear regarding your assumption that I would agree to your second statement that I quoted above -- the answer is NO. If AI does the work, no matter how much "direction" you give it, it cannot be copyrighted. All AI generated content is in the Public Domain and therefore the copyright cannot be assigned to ANYONE, even you -- until and unless substantial modifications are made to it BY A HUMAN BEING (yourself or a contracted artist/writer/etc.) and then that copyright on the derivative work is legally (in writing) transferred to you. This is a critical distinction. And it is important that people, especially AI sloppers, understand this. For example, YouTube is not paying AI slop generators for the copyright, etc. of their AI slop. What YouTube is doing is sharing AD REVENUE for permission to publish your AI slop. Copyright/ownership/rights never come into it. Importantly, that means that anyone can copy any AI slopware on YouTube, etc. and rehost it anywhere they want, even back on YouTube, and there is nothing legal that YouTube can do about it with regards to copyright protections, ownership, DMCA, etc. Anyone is legally free to use any AI slopware in any way they want. When this ruling was pending, I warned Disney legal of all of this before they did their OpenAI deal -- that it would literally dilute their entire IP portfolio forever. They ignored that warning for the PR and stock bump. But that is why, when the ruling came down last year, Disney quickly extricated themselves from that OpenAI deal, even eating the initial upfront fees -- followed closely by OpenAI ending their entire AI video generating business model. They adjusted their PR release dates to make this less obvious to shareholders, of course. Phew. I hope that this clears up the key distinctions for you and anyone reading. If you have any additional questions or even hypotheticals about AI and Copyright, please feel free to ask.
    • Each of the devices displayed on this page now has a little volume meter next to it to show if there is audio actively playing. About time.
    • Owing to the nature of Windows feature enablement updates, it was distributed over Windows Update services as a complete system upgrade rather than as an ordinary cumulative update
    • Microsoft confirms Windows 11 26H2, urges IT admins to prepare for release by Usama Jawad Windows 11 typically follows an annual update cycle, but Microsoft recently broke that tradition a bit by releasing a "26H1" version in the first half of this year as a "scoped" build for select new silicon PCs only. This version was not available for customers using 24H2 and 25H2 builds, as Microsoft is busy preparing version 26H2 for them, confirmed officially for the first time. In a Windows IT Pro blog, Microsoft has urged IT admins to prepare for the upcoming release of Windows 11 version 26H2. The company has confirmed that this will be a small enablement package (eKB) that will simply light up certain disabled features that are already present in the operating system's code base. This means that the "refined" Windows update and deployment experience will be simpler and quicker, with minimal disruptions, as the feature update will simply toggle a few flags rather than performing a complete replacement. Microsoft has explained that this is all possible because the standard Windows 11 releases share the same servicing branch and hence, the same source code. However, this also means that Windows 11 26H1 users won't be able to upgrade to 26H2 as that is a different branch, but this is something we have known for a while now. Similar to previous annual feature updates, Windows 11 26H2 will offer the following support cycles: 24 months of support for Home, Pro, Pro EDU, and Pro for Workstations editions 36 months of support for Enterprise, Education, IoT Enterprise, and Enterprise Multi-session editions Microsoft has not confirmed a concrete release date for Windows 11 26H2, but noted that it is "coming soon". If we go by the ongoing release cadence, we can expect it to begin rolling out in early October 2026. As such, IT admins have been encouraged to begin validating Windows Insider releases in the Experimental Channel, plan rollout rings, and strategize the utilization of their existing deployment tools.
  • Recent Achievements

    • Collaborator
      ryansurfer98 went up a rank
      Collaborator
    • Week One Done
      Eurosoft10 earned a badge
      Week One Done
    • One Month Later
      Eurosoft10 earned a badge
      One Month Later
    • One Year In
      Skeet Campbell earned a badge
      One Year In
    • One Month Later
      Sharbel earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      569
    2. 2
      +Edouard
      188
    3. 3
      Michael Scrip
      79
    4. 4
      PsYcHoKiLLa
      74
    5. 5
      neufuse
      72
  • Tell a friend

    Love Neowin? Tell a friend!