How to Burn to 800MB CDR


Recommended Posts

Nowdays people's hunger for space is increasing. People are not satisfied with 700MB CD-R's available in the market. So they go for 800MB CD-R. Burning to 700MB CD and 800MB CD are entirely different tasks.

I will tell you how to burn to 800MB CD-R successfully using Nero 6.6.013

Requirements:

1. A branded 800MB CD-R preferrably Amkette.

2. A writer supporting Overburning. To check whether this feature is supported by your writer go to Recorder Menu and then select Choose Recorder. Now Select your recorder and in the bottom you should look for this on the screen.

Overburn: Supported

3. You need to have the latest firmware for your recorder model, as it will contain information to enable overburning. Most importantly, it will contain read/write strategies for new brands of CD-R and CD-RW media and can resolve many issues you may otherwise run into.

Steps to do:

1. Go to File>>Preferences>>Expert Features and check the box:Enable Disc-at-once CD overburning and set Maximum CD Size as according to given specifications:

For 80 min media set to 82:00

For 90 min media set to 89:30

For 99 min media set to 99:54:74

and now click OK.

2. Now select File>>New and select No Multisession

3. Click on ISO and set Data Mode to Mode 2/XA

Note for here:

Any CD blank with a size over than 80 minutes (about 700 MB) should be recognized as a size-80 minutes CD due to ISO restrictions. This is absolutely normal. As a result, you could never write a multisession CD using more-than-90-minutes CD blank. If you will try to create multisession on such CD, you should be limited with size-80 minutes (or size-700 MB). As an enother result, you should use overburning option to write CD's with capacity of over than 80 minutes.

4. Select Burn and check Write Method: Disc-at-once or Disc-at-once/96. Do not load any application during 90-minutes CD burning and decrease burning speed to 12x to avoid buffer overrun.

Hope you will now be comfortable using 800MB CD-R's but don't overburn regularly. It can sometimes damage your Writer permanently also. Their are several complaints regarding this.

P.S. Writer does not claim responsibility of the success of the above method in every case. I will not be held responsible in case you damage some of your hardware or software while doing this.

Link to comment
https://www.neowin.net/forum/topic/453525-how-to-burn-to-800mb-cdr/
Share on other sites

DVD-R blanks cost about the same as a CD-R, and 800mb CD ISOs can be burnt to DVD-R without a problem too.

Really? Point me a store that sells DVD-R for 20 cents. I have yet to see...

and a CD ISO and a DVD ISO are completely different standards and are not compatible. This guide is mainly for data only. Plus its rather pointless too because Nero 7 (and I suppose Roxio's burning app) automatically detects that you are burning a project over 700MB and will scan the media inserted to see if its a 800 or 900MB disc and enable OverBurn for the drive and burn it as normal.

and plus ive already burnt a cd-rw that can holds 1.75 gb to a cd alerady with the overburn technique

False.

Mainly because OverBurn CD-RW AFAIK dont exist because no site has ever mentioned them and they are rather unstable for OverBurn.

You problably downloaded/ripped illegally a game/VCD which's ISO was over 700mb but burnt perfectly to a disc. That extra info is just some "1010101" crap that takes up space to mainly combat privacy and other useless stuff but Nero ignores it and burns the disc perfectly anyhow.

1.75GB on a CD is only possible when you make duplicate files appear just once in a CD. But such CDs are bad for health of PC and mostly are illegal. So don't fall for trap CDs showing 1.75GB in a 700MB Disc!

BTW you are right rIaHc3.. even in India CDrs are lot cheaper than DVD-Rs.!

Well in Australia, a 100x spindle of Ridata DVD-Rs is $25AUD (25c each) and a 100x spindle of 700MB Ridata CD-Rs is $18.50 (18.5c each) from the swap meet. Not a lot of difference, and the extra 6.5c is worth it for the added reliability (and flexability of burning up to 4.3GB), you'ld probably burn a few coasters before getting this method right.

The ISO 9660 filesystem is used for CD-Rs. ISO 9660 is also fully compatible with DVD-Rs, even though the UDF filesystem is more popular for DVDs.

I have personally burnt ISO 9660 with El Torito ISOs (Bootable CDs) to DVD-RW and it has booted and read perfectly (The software in question was my Unattended Windows XP CD, which was first ripped from the original Windows XP CD before adding the winnt.sif).

Reasons why you would want to burn an 800MB CD-R are if you are burning a CD for someone that might not have a DVD-ROM drive, you are burning system utilities that need to better compatiblity with all PCs that you need it for (your friends/clients might not all have DVD ROM drives) or you are burning it for a CD/MP3 player in your car or stereo (which would not be able to read DVD-Rs)

  • 2 weeks later...

1.75GB on a CD is only possible when you make duplicate files appear just once in a CD. But such CDs are bad for health of PC and mostly are illegal. So don't fall for trap CDs showing 1.75GB in a 700MB Disc!

BTW you are right rIaHc3.. even in India CDrs are lot cheaper than DVD-Rs.!

Sony CD-R costs Rs 20

Sony DVD-R costs Rs 60

Not much considering you get more than 6x of storage.

Moserbaer are much reliable and cheaper. Both CD and DVD's made by them are relatively cheaper if you buy them in large quantities ( say 50 ).

50 CD's costs you $8.33 === storage 35000MB's

20 DVD's costs you $8.88 ==== storage 86016MB's

So if you do the math DVD's are cheaper provided you have a DVD-RW.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!