Run Windows 3.1 from a USB flash drive


Recommended Posts

I know that you can run Windows 3.1 from a floppy, so i was wondering if it would be possable to run it from a flash drive. Are there any guids on how to do it? I have searched google, but nothing came up.

Follow whatever guide you found and wherever you see 'floppy' replace it with 'flash drive' and see if that works.

I don't think that Win3.11 could be maded to understand the whole USB thing, and you likely cannot run it directly from a flash drive. However, you can probably run an OS that does handle USB (Linux, Win98b+) and use some sort of emulation/virtual PC to run your Windows 3.11 session from within that other OS.

I know that you can run Windows 3.1 from a floppy, so i was wondering if it would be possable to run it from a flash drive. Are there any guids on how to do it? I have searched google, but nothing came up.

There are drivers for accessing USB drives from MS-DOS (they'd have to be FAT, not FAT32, formatted, of course). I know that Norton Ghost comes with them (I've made a DOS boot CD with them that works -- I got them from Norton Ghost 2003, I believe). Seems to me that if you could get DOS and these drivers loaded and a drive mounted with a letter, installing and running Windows off of the flash drive would be a non-issue.

Booting DOS/Windows from the flash drive may be an issue. I'm thinking about booting DOS from a CD or other media and then running Windows.

Edited by Aaron44126

It should be pretty simple. It's pretty easy to boot DOS from a USB key (with that HP utility for which they unfortunately took the link down), and Windows 3.1 is just a bunch of crap running on top of DOS. If you enable USB legacy support in your BIOS (which emulates USB mice/keyboards to normal ones and USB mass storage to a hard drive or floppy), it shouldn't be a problem.

[hijack] Is someone able to link me to that HP utility. I have heard things about it before [/hijack]

Archive.org remembers all... :whistle:

http://web.archive.org/web/20050401013226/...load/20306.html

Well, it sort of works. I installed it via vmware by telling it to use a physical disk. I installed dos 6.22 and windows for workgroups 3.11. Dos works fine, but every time i try to start windows, it shows the boot screen then crashes to the command prompt.

Sorry for the double post, it won't let me edit my previous one.

I looked in the log and this is the error:

System.ini is missing the "[386enh]" section.
Run windows setup again to install a compleate system.ini file.

I looked at my system.ini, and it seems to have the section. Here is a copy of it:

[Password Lists]
*Shares=C:\WINDOWS\Share001.PWL
   `a5?? CARDFILEEXE	   !   `a_ l CARDS   DLL		   `ak0D CLIPBRD EXE	   !   `a~ 6 EFAXPUMPDLL		   `a? ?  EMM386  EXE	   !   `a?^? FAXOPT  DLL		   `a??m GLOSSARYHLP		   `a???  FAXVIEW EXE	   !   `a? \ MORICONSDLL		   `a	P? IMPEXP  DLL		   `a?  MPLAYER HLP		   `a`2  MSHEARTSEXE	   ?4  `a ? MSMAIL  HLP		   `a(?* PRINTMANEXE	   !   `aE? 
language.dll=English (American)
system.drv=MS-DOS System
codepage=437
woafont.fon=English (437)
aspect=100,96,96
display.drv=VGA
network.drv=Microsoft Windows Network (version 3.11)
secondnet.drv=No Additional Network Installed

[386Enh]
device=vtdapi.386
device=vshare.386
mouse=*vmd
ebios=*ebios
woafont=dosapp.fon
display=*vddvga
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
keyboard=*vkd
network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
netheapsize=20
device=*vcd
device=*vpicd
device=*vtd
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*PAGEFILE
device=*BLOCKDEV
device=*vfd
device=*parity
device=*biosxlat
device=*vmcpd
device=*combuff
device=*cdpscsi
device=vpmtd.386
device=vcomm.386
device=serial.386
device=lpt.386
device=ifsmgr.386
device=vcache.386
local=CON
FileSysChange=off
COM3Irq=4
COM3Base=03E8
COM4Irq=3
COM4Base=02E8
PagingFile=C:\WINDOWS\WIN386.SWP
MaxPagingFileSize=238372
InDOSPolling=FALSE

[NonWindowsApp]
localtsrs=dosedit,ced

[vcache]
minfilecache=512

[mci]
CDAudio=mcicda.drv
Sequencer=mciseq.drv
WaveAudio=mciwave.drv

[drivers]
midimapper=midimap.drv
timer=timer.drv

[DDEShares]
CHAT$=winchat,chat,,31,,0,,0,0,0
SCHAT$=winchat,chat,,31,,0,,0,0,0
CLPBK$=clipsrv,system,,31,,0,,0,0,0
HEARTS$=mshearts,hearts,,15,,0,,0,0,0

[Network]
winnet=wfwnet/00025100
multinet=nonet
FileSharing=Yes
PrintSharing=Yes
LogonDisconnected=yes
EnableSharing=Yes
UserName=
Workgroup=WORKGROUP
ComputerName=WFW311
Comment=



[network drivers]
devdir=C:\WINDOWS
LoadRMDrivers=No

[Password Lists]
*Shares=C:\WINDOWS\Share00

You can most certianly run windows from a floppy disk, since this is been done several times. You need to unzip the stuff into a ramdisk, and not be overly fussy as to the shell: i used sol.exe here, as this provides most of the functionality of windows, anyway.

Running it from a usb-stick requires a dos usb driver (which exist).

You can quite easily run it from a cdrom, by using the so-called "network install". You set up windows via "setup /a" for the cdrom side, and "setup /n" for the client side. This creates a windows directory with something like 140 kB (enough for a floppy!), which with a little tweaking, can be reduced to a 14k rar file (basically, you create a batch file to make win.com and winver.exe, and rar the rest!).

You can most certianly run windows from a floppy disk, since this is been done several times. You need to unzip the stuff into a ramdisk, and not be overly fussy as to the shell: i used sol.exe here, as this provides most of the functionality of windows, anyway.

Running it from a usb-stick requires a dos usb driver (which exist).

You can quite easily run it from a cdrom, by using the so-called "network install". You set up windows via "setup /a" for the cdrom side, and "setup /n" for the client side. This creates a windows directory with something like 140 kB (enough for a floppy!), which with a little tweaking, can be reduced to a 14k rar file (basically, you create a batch file to make win.com and winver.exe, and rar the rest!).

Well, dos ran fine from the usb drive without a USB driver, its just that Win 3.1 didn't want to boot for one reason or another. If i got a usb driver for win 3.1, what would i need to do to have it load on start up?

hi there i was wondering if someone could help me here see i have a old laptop which is hitachi visionbook traveler 3000 series and i windows 3.11 workgroup with ie 3.03 and netscape i have a 3com 16bit pcmcia card with all the drivers can anyone help me how to get online with 3.11

thank you

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
    • Seems like Neowin has transitioned into being simps for the white house. I can't find a review for the last UFC games that came out.
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!