Run Windows 3.1 from a USB flash drive


Recommended Posts

I know that you can run Windows 3.1 from a floppy, so i was wondering if it would be possable to run it from a flash drive. Are there any guids on how to do it? I have searched google, but nothing came up.

Follow whatever guide you found and wherever you see 'floppy' replace it with 'flash drive' and see if that works.

I don't think that Win3.11 could be maded to understand the whole USB thing, and you likely cannot run it directly from a flash drive. However, you can probably run an OS that does handle USB (Linux, Win98b+) and use some sort of emulation/virtual PC to run your Windows 3.11 session from within that other OS.

I know that you can run Windows 3.1 from a floppy, so i was wondering if it would be possable to run it from a flash drive. Are there any guids on how to do it? I have searched google, but nothing came up.

There are drivers for accessing USB drives from MS-DOS (they'd have to be FAT, not FAT32, formatted, of course). I know that Norton Ghost comes with them (I've made a DOS boot CD with them that works -- I got them from Norton Ghost 2003, I believe). Seems to me that if you could get DOS and these drivers loaded and a drive mounted with a letter, installing and running Windows off of the flash drive would be a non-issue.

Booting DOS/Windows from the flash drive may be an issue. I'm thinking about booting DOS from a CD or other media and then running Windows.

Edited by Aaron44126

It should be pretty simple. It's pretty easy to boot DOS from a USB key (with that HP utility for which they unfortunately took the link down), and Windows 3.1 is just a bunch of crap running on top of DOS. If you enable USB legacy support in your BIOS (which emulates USB mice/keyboards to normal ones and USB mass storage to a hard drive or floppy), it shouldn't be a problem.

[hijack] Is someone able to link me to that HP utility. I have heard things about it before [/hijack]

Archive.org remembers all... :whistle:

http://web.archive.org/web/20050401013226/...load/20306.html

Well, it sort of works. I installed it via vmware by telling it to use a physical disk. I installed dos 6.22 and windows for workgroups 3.11. Dos works fine, but every time i try to start windows, it shows the boot screen then crashes to the command prompt.

Sorry for the double post, it won't let me edit my previous one.

I looked in the log and this is the error:

System.ini is missing the "[386enh]" section.
Run windows setup again to install a compleate system.ini file.

I looked at my system.ini, and it seems to have the section. Here is a copy of it:

[Password Lists]
*Shares=C:\WINDOWS\Share001.PWL
   `a5?? CARDFILEEXE	   !   `a_ l CARDS   DLL		   `ak0D CLIPBRD EXE	   !   `a~ 6 EFAXPUMPDLL		   `a? ?  EMM386  EXE	   !   `a?^? FAXOPT  DLL		   `a??m GLOSSARYHLP		   `a???  FAXVIEW EXE	   !   `a? \ MORICONSDLL		   `a	P? IMPEXP  DLL		   `a?  MPLAYER HLP		   `a`2  MSHEARTSEXE	   ?4  `a ? MSMAIL  HLP		   `a(?* PRINTMANEXE	   !   `aE? 
language.dll=English (American)
system.drv=MS-DOS System
codepage=437
woafont.fon=English (437)
aspect=100,96,96
display.drv=VGA
network.drv=Microsoft Windows Network (version 3.11)
secondnet.drv=No Additional Network Installed

[386Enh]
device=vtdapi.386
device=vshare.386
mouse=*vmd
ebios=*ebios
woafont=dosapp.fon
display=*vddvga
EGA80WOA.FON=EGA80WOA.FON
EGA40WOA.FON=EGA40WOA.FON
CGA80WOA.FON=CGA80WOA.FON
CGA40WOA.FON=CGA40WOA.FON
keyboard=*vkd
network=*vnetbios,*vwc,vnetsup.386,vredir.386,vserver.386
netheapsize=20
device=*vcd
device=*vpicd
device=*vtd
device=*reboot
device=*vdmad
device=*vsd
device=*v86mmgr
device=*pageswap
device=*dosmgr
device=*vmpoll
device=*wshell
device=*PAGEFILE
device=*BLOCKDEV
device=*vfd
device=*parity
device=*biosxlat
device=*vmcpd
device=*combuff
device=*cdpscsi
device=vpmtd.386
device=vcomm.386
device=serial.386
device=lpt.386
device=ifsmgr.386
device=vcache.386
local=CON
FileSysChange=off
COM3Irq=4
COM3Base=03E8
COM4Irq=3
COM4Base=02E8
PagingFile=C:\WINDOWS\WIN386.SWP
MaxPagingFileSize=238372
InDOSPolling=FALSE

[NonWindowsApp]
localtsrs=dosedit,ced

[vcache]
minfilecache=512

[mci]
CDAudio=mcicda.drv
Sequencer=mciseq.drv
WaveAudio=mciwave.drv

[drivers]
midimapper=midimap.drv
timer=timer.drv

[DDEShares]
CHAT$=winchat,chat,,31,,0,,0,0,0
SCHAT$=winchat,chat,,31,,0,,0,0,0
CLPBK$=clipsrv,system,,31,,0,,0,0,0
HEARTS$=mshearts,hearts,,15,,0,,0,0,0

[Network]
winnet=wfwnet/00025100
multinet=nonet
FileSharing=Yes
PrintSharing=Yes
LogonDisconnected=yes
EnableSharing=Yes
UserName=
Workgroup=WORKGROUP
ComputerName=WFW311
Comment=



[network drivers]
devdir=C:\WINDOWS
LoadRMDrivers=No

[Password Lists]
*Shares=C:\WINDOWS\Share00

You can most certianly run windows from a floppy disk, since this is been done several times. You need to unzip the stuff into a ramdisk, and not be overly fussy as to the shell: i used sol.exe here, as this provides most of the functionality of windows, anyway.

Running it from a usb-stick requires a dos usb driver (which exist).

You can quite easily run it from a cdrom, by using the so-called "network install". You set up windows via "setup /a" for the cdrom side, and "setup /n" for the client side. This creates a windows directory with something like 140 kB (enough for a floppy!), which with a little tweaking, can be reduced to a 14k rar file (basically, you create a batch file to make win.com and winver.exe, and rar the rest!).

You can most certianly run windows from a floppy disk, since this is been done several times. You need to unzip the stuff into a ramdisk, and not be overly fussy as to the shell: i used sol.exe here, as this provides most of the functionality of windows, anyway.

Running it from a usb-stick requires a dos usb driver (which exist).

You can quite easily run it from a cdrom, by using the so-called "network install". You set up windows via "setup /a" for the cdrom side, and "setup /n" for the client side. This creates a windows directory with something like 140 kB (enough for a floppy!), which with a little tweaking, can be reduced to a 14k rar file (basically, you create a batch file to make win.com and winver.exe, and rar the rest!).

Well, dos ran fine from the usb drive without a USB driver, its just that Win 3.1 didn't want to boot for one reason or another. If i got a usb driver for win 3.1, what would i need to do to have it load on start up?

hi there i was wondering if someone could help me here see i have a old laptop which is hitachi visionbook traveler 3000 series and i windows 3.11 workgroup with ie 3.03 and netscape i have a 3com 16bit pcmcia card with all the drivers can anyone help me how to get online with 3.11

thank you

  • 2 weeks later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Crazy. The government fired everyone who was capable of actually understanding this. More security theater. Just checked it is gone from Claude.
    • bring trump to the board, then apple will have some innovation to talk about
    • Microsoft released Windows 11 KB5094149 / KB5095971 / KB5094156 Setup, Recovery updates by Sayan Sen Earlier this week Microsoft released its newest Patch Tuesday updates (KB5094126 / KB5093998 on Windows 11 and KB5094127 on Windows 10). Alongside those, Microsoft also released new dynamic updates. These Dynamic Update packages are meant to be applied to existing Windows images prior to their deployment. Dynamic Updates also help preserve Language Pack (LP) and Features on Demand (FODs) content during the upgrade process. VBScript, for example, is currently an FOD on Windows 11 24H2. This time both recovery and setup updates were released for Windows 11 as well as Windows 10. The company writes: "KB5095185: Safe OS Dynamic Update for Windows 11, version 26H1: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.28000.2269. KB5094149: Safe OS Dynamic Update for Windows 11, versions 24H2 and 25H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.26100.8655 KB5095971: Setup Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to Windows setup binaries or any files that setup uses for feature updates in Windows 11, version 23H2. KB5094156: Safe OS Dynamic Update for Windows 11, version 23H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.22621.7219 KB5098815: Windows Recovery Environment update for Windows 10, version 21H2 and 22H2: June 9, 2026 This update automatically applies Safe OS Dynamic Update (KB5094154) to the Windows Recovery Environment (WinRE) on a running PC. The update installs improvements to Windows recovery features. KB5094154: Safe OS Dynamic Update for Windows 10, versions 21H2 and 22H2: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.19041.7417. KB5094153: Safe OS Dynamic Update for Windows 10, version 1809 and Windows Server 2019: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.17763.8880. KB5094152: Safe OS Dynamic Update for Windows 10, version 1607 and Windows Server 2016: June 9, 2026 This update makes improvements to the Windows recovery environment (WinRE). After installing this update, the WinRE version installed on the device should be 10.0.14393.9234." Microsoft notes that both the Recovery and Setup updates will be downloaded and installed automatically via the Windows Update channel.
    • Quantum Error Correction Validated in Nature: Microsoft and Quantinuum Log 800-Fold Improvement Two years after the original press-release announcement, independently peer-reviewed results published in Nature on June 10, 2026, have confirmed that Microsoft and Quantinuum achieved an 800-fold reduction in quantum error rates on real trapped-ion hardware — the largest gap between physical and logical error rates ever independently validated.    What Quantum Error Correction Actually Does — and Why Breaking Even Is Hard https://www.techtimes.com/articles/318329/20260613/quantum-error-correction-validated-nature-microsoft-quantinuum-log-800-fold-improvement.htm   Quantum Computing Wiring Bottleneck Cracked by HKU Silicon Carbide Chip at Qubit Temperature Engineers at the University of Hong Kong have built the first cryogenic control chip that operates at the same temperature as superconducting qubits — 10 millikelvin, or just one-hundredth of a degree above absolute zero — without generating the heat that has forced every competing approach to park its electronics hundreds of meters of cable away. https://www.techtimes.com/articles/318325/20260613/quantum-computing-wiring-bottleneck-cracked-hku-silicon-carbide-chip-qubit-temperature.htm  
    • RevPDF 4.5.0 by Razvan Serea RevPDF is a free, fully offline PDF editor for Windows, macOS, and Linux that lets you edit text and images directly inside PDF files — no internet connection, no account, and no cloud uploads required. Unlike bloated alternatives that demand subscriptions and constant connectivity, RevPDF fits in under 60MB on desktop while delivering a complete editing toolkit: annotate, redact, sign, compress, split, merge, convert, and reorganize pages, all processed locally on your device. Smart font matching ensures edited text blends seamlessly with the original, and multi-language support includes RTL scripts such as Arabic and Hebrew. Where most PDF editors force you to choose between features and simplicity, RevPDF manages both. You can build interactive forms from scratch with text fields, checkboxes, and dropdowns, permanently redact sensitive data before sharing, draw freehand on contracts and diagrams, and add custom watermarks — all without a single file leaving your machine. Edit Text and Images Directly Inside PDFs RevPDF supports true inline PDF editing — not just annotation layers on top of a document, but actual modification of existing text and images within the file. A smart font-matching engine identifies the font used in the original document and applies it automatically when you make edits, so changes blend naturally with the surrounding content. You can reposition elements, resize images, and update text across single pages or entire documents. RevPDF 4.5.0 release notes: This is one of the biggest updates to RevPDF yet. A lot of things people have been asking for are finally here. New Features Auto Redaction Permanently redact sensitive text and areas from your PDFs before sharing. Clean, irreversible, and fully offline. Comments, Links & Bookmarks Add comments for review, insert clickable links, and create bookmarks to jump around long documents without scrolling forever. Find & Replace Search across the whole document and replace text in one go. Long overdue. Split Pages Vertically or Horizontally Split any page down the middle, vertically or horizontally. Perfect for scanned books or double-page spreads. New Drawing Tools More tools for freehand drawing and markup, better for annotations, sketches, and detailed notes. Continuous Scrolling in Editor The editor now scrolls continuously through pages instead of jumping between them. Working through long documents is a lot smoother now. PDF Metadata Editor View and edit the metadata stored inside your PDFs, including title, author, subject, and keywords. Better Font Matching Text edits now blend in more naturally by doing a better job of matching the original font. Tabbed PDF Viewer Open multiple PDFs at once in tabs and switch between them without going back to the home screen. Add Links Insert hyperlinks anywhere in your PDF, to external URLs or to other pages within the document. Share & Print Shortcuts Share or print directly from the editing screen, home screen, and viewer. No extra steps. Minor Updates Paste images directly from clipboard into your PDF New image editing tools for more control over images inside documents Bug Fixes Fixed file saving issues on Windows and Linux Everything still works fully offline. No login, no cloud, no account. Your files stay on your device. Download: RevPDF 4.5.0 | 58.0 MB (Open Source) Links: RevPDF Home Page | Github | Screenshots 1 | 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      +Edouard
      175
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      91
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!