1GB of DDR-400 vs 2GB of DDR-266


Recommended Posts

I was wondering because I have 1gb of DDR400 right now but was just given another 1gb of DDR but it is 266. My DDR400 is able to clock down to 266 but I was wondering if I'd be better off just sticking to the 1gb of DDR400. This is on an Intel 865GBF motherboard with dual channel config. I have my current ram in dual channel mode right now. Thanks in advance! :D

Link to comment
https://www.neowin.net/forum/topic/485277-1gb-of-ddr-400-vs-2gb-of-ddr-266/
Share on other sites

Well exactly. Only you know what's most suitable for you.

If you're regularly using (or could use) over 1GB of memory, then go with the 2GB. If you rarely use over 1GB of memory you're better off going for faster memory rather than more if it although, despite what others will say, the speed increase from DDR266 to DDR400 isn't really noticable unless you're doing a heck of a lot of paging.

Having said that, if you're currently running 2x512 DDR400 in dual channel mode, and all of a sudden find yourself switching to 2x51MB 2 + 1x1GB in single channel mode you might see a speed decrease.

Since you've already been given the 1GB DDR266, I suggest you try both configs and see which you prefer.

the plan is to remain in dual channel mode, 512mb sticks in each of the 4 slots (two of them being ddr400 two being ddr266) i know that it will run only at the lowest speed, i guess i will have to try it out and see what happens! thanks for the suggestions.

id still side w/ the 1GB vs 2GB. even if you "have a lot of programs open at once" that doesnt mean you'll be using anywhere near 1GB, unless of course those programs are Photoshop or 3D graphical stuff. a lot of games use more than 1GB these days, which is terrible... but i still think youre better off w/ 1GB faster ram.

I'm basically agreeing with everyone else. If it was DDR333, then it might not be as bad, but dropping all the way to 266... That's almost half the bandwidth. Like Jdawg said, make sure you're using over 1GB of memory with the programs you're running. If you aren't, keep the faster RAM.

1GB of DDR400.. so you don't have to get rid of your ram later in life to upgrade (Y). you can always buy another 1GB of DDR400, but if you buy 266, you'll have to buy 4 sticks of 400 eventually, unless you go DDR2

do some benching (games, superpi 1M, whatever) then take a decision.

you won't lose dual channel so the bandwith loss is maybe not much dramatic. I guess you can live with 4GB/s.

I for one went from 768MB sdram on K7S5A to 512MB PC3200 @ 133MHz on a KT333 motherboard, due to fryed components and the difficulty of finding a sdram motherboard (I have an XP2400+). Now the PC is something like 10+% faster in benches but the lack of RAM shows in games, far cry ran great before and now it sucks a bit.

If you use that RAM, don't hesitate to put it in.

there's nothing wrong using your RAM, if you guys here refuse to use a free 1GB DDR 266 please send me your sticks :D.

you have all your time to later find 2X512MB PC3200 for cheap, or even 2X256 PC3200 for very cheap (again, nothing wrong using those sticks) and selling for cheap or giving away your DDR266 to someone you know.

Edited by Blazkowicz
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ouch, man.. Hope you can get a replacement for that..
    • They just need to add a transparency slider. I’d prefer a middle ground where everything is transparent, but background items are blurred.
    • A guy messaged me yesterday wanting to talk on the phone, it turns out his friend messaged on "marktplaats" a day earlier asking what my lowest price was (€1650). After talking for a bit about it (he says he has no experience with computers and is relying on his friend) and then confirming with his friend, he messaged me he wanted to pick it up today. They both came today to check it out, and pick it up. SOLD. I prefer it this way rather than having to cannibalize it to sell for parts.
    • Was taking the side glass panel off because I want to install the AORUS X870E Master GPU holder, and while I had the glass side panel in my hands the front one decided to take a kamikaze dive. Now I hope they sell the glass fronts separately, or I am screwed. I'll probably be finding bits of glass for weeks now  😅
    • Yeh, I think you'll find there wasn't much legit savings from what he did. Any chump can fire a bunch of people indiscriminately from positions and services that don't impact that person. At the end of the day, it just means that services that are essential in any functional democracy, won't be able to operate because there are no people to deliver those services. Sure, it "saves" money on paper, but like most short sighted bean counters, there are very real, and expensive impacts later on down the track. Did you know that by buying 2x toothbrush's and a tube of toothpaste every year, and seeing the dentist every 6 months would cost you about $400 a year? So by the time you're in your 30's that would be $12000 of cost! Now imagine if you didn't spend any of that $12000 on preventative oral health care! Wow, so much more money! But you also needed to have several root canals at $1500 per tooth. Plus the time off work for being unable to function with the pain. So lets face it, that initial cost is worth it!
  • Recent Achievements

    • Week One Done
      Simmo3D earned a badge
      Week One Done
    • One Month Later
      Simmo3D earned a badge
      One Month Later
    • One Month Later
      greege earned a badge
      One Month Later
    • Week One Done
      greege earned a badge
      Week One Done
    • Week One Done
      LagFighterZ earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      547
    2. 2
      ATLien_0
      230
    3. 3
      +FloatingFatMan
      166
    4. 4
      Michael Scrip
      119
    5. 5
      +Edouard
      91
  • Tell a friend

    Love Neowin? Tell a friend!