List Your Overclocks..

[Garrett Socling]

I am currently running my Palamino 1600+ @ 1631Mhz (155/155Mhz, 10.5 multi) on an Asus A7N8X-X. I am working towards 166/166Mhz.

Temps are 105'F CPU / 73'F Case, with a $7 speeze cooler.

So, currently a 231Mhz overclock. Stable via Hot CPU Tester.

G

[jaelmason]

:D Athlon xp 2100+ @ 2343 (16.5x142), but it runs around 58 to 65c. It is stable though. :shifty:

[CCR]

I have a no-oced 2000+ and a pIII 866@975MHz which runs around 40?C

[wengole]

CPU: Athlon XP 2500+ (Barton Core 512KB L2 Cache) - Rated at 2800+ (2.09 GHz)

RAM: 512MB DDR PC2700 (Currently limiting my FSB overclocking)

GPU: MSI (I know but it was cheap :D) GeForec MX 5200 (Currently not O/C'd, dont see the point)

PSU: QTEC 550W Dual Fan Gold

HDDs: Primary: IBM Deskstar 60GB (Can't remeber specs but here's model number IC35L060AWA07-0)

Secondary: Maxtor Diamond Max 9 8MB Cache Version (should really be main but in process of setting up HDDs for a 2nd PC :p)

Case: iCute Case Purchased from Maplin Electronics

Lighting: Maplin Electronics 2 Cold Cathode Kit with UV tube replaced for a Red one (btw i work there so i get staff discount :p)

Cooling: The terrible fan the case came with, and Second Hand Akasa manual speed control fan with 4 blue LEDs (Speed thingy doesn't work too well, LEDs arent bright enough)

Planned Mods: HDD Window (risky but worth it), DVD-Rom window (not too interesting but easy), Water Cooling (one day, maybe, if i cba)

[velocity3k]

AMD Athlon XP 2500+ (1.8GHz) to 3200+ (2.2Ghz)

[SimplyPotatoes]

i overclocked my sisters athlon 1400 to 1500 and now it runs IDLE 65C and doesn't complete any cycles of prime95(even at idle) and when it runs seti @home for a long time it get to 78-80C and its got a stock heatsink with stock fan in a poorly ventalated case inside a cabinet. ill post screenshots laters, AMD's sure can take a beating

[ForeverUnknown]

p4 3.0c to 3.4 with 225fsb/900bus, 1.6vcore. i can go higher on the fsb but i dont wanna push it because it's always warm in my room

[Polishrob]

2100+ @ 3100+ speeds

[Omega_Green]

got my p4 2.2 running at 2.8 seems pretty stable so far. I'm using the quiet maxx 6500 copper heatsink. Was gonna try out water cooling but couldn't find anything around town, and wanted to do it at that moment and not have to order it online and wait.

[Samoa]

2800 Barton to 3200 Barton 2.2ghz 400FSB v1.65 temp 38C

[KTamas]

P3-600EB, 192MB No-name PC100 SDRAM

CPU@630MHz (140FSB)

Memory:140MHz (40% OC!)

[+Nik Louch Subscriber²]

My watch is 4minutes 31seconds fast. Does that count?

[Ritalin]

rofl

[Samoa]

2800Barton 11.5 x 200 = 2.3ghz 400FSB v1.75

[obscure_detour]

1700+ 1.47GHz @ 205FSB 2.46GHz ~3400+

205 * 12.0 Multiplier, 410DDR Memory

1.75volts, vcore voltage

Alpha 8045 80mm

50C Full Load Temp

Just look at my sig.

obscure detour

[FearMeAll]

1700+ 1.47GHz @ 205FSB 2.46GHz ~3400+

205 * 12.0 Multiplier, 410DDR Memory

1.75volts, vcore voltage

Alpha 8045 80mm

50C Full Load Temp

Just look at my sig.

obscure detour

you don't have a 3400, but it is a hellafast cpu!!! :o

your 1700 is based on the palomino core and only has a 256kb cache and not 512 like the barton..so you cannot use the same PR rating.

unbelievable overclock though, notwithstanding. very impressive! ;)

[Borbus]

OCed my P2 233 to 266

Went from ~30 C to 70C

found out later that cpu fan wasnt working and still isnt

[Ritalin]

lol is it dead yet?

[Khujo]

Oc'd my p4 to 3.2 stable using bios AI overclocking featurebut that ran the memory at only 160Mhx

Oc'd my manual to 2964 fsb @ 228MHz (2.4-4-4-8) stable but backed off to 225Mhz/450DDR and 900QDR FSB speed for added stability, i plan to raise my cas to 3 and see if i can get a bit higher clock speed, i've read that with dual channel memory cas latency has much less impact.

[Samoa]

1700+ 1.47GHz @ 205FSB 2.46GHz ~3400+

205 * 12.0 Multiplier, 410DDR Memory

1.75volts, vcore voltage

Alpha 8045 80mm

50C Full Load Temp

Just look at my sig.

obscure detour

you don't have a 3400, but it is a hellafast cpu!!! :o

your 1700 is based on the palomino core and only has a 256kb cache and not 512 like the barton..so you cannot use the same PR rating.

unbelievable overclock though, notwithstanding. very impressive! ;)

You are right, impressive, it should burn out and not boot someday soon...lol. ;)

[ericnmu]

Well I finaly got my 2500+ Barton to run stable at 3200+ 11x200 FSB 1.65 vcore.

[DigitalN.]

ANYONE that wants a very ocable AMD should make sure they get a DLT3C JIUHB core. those are beasts! by the way, mine aint nothin much cause i am very limited by the Mobo. it is an AMD 2000+ runnin at 1.8 ghz(so a 2200+) and the mobo is a shuttle MK35N. it is bein cooled by a volcano 12 runnin 60 degrees under load and 54 idle(the fan is half way and the side of the case is off.

[123_kid]

AMD Athlon 2600+ (2.08 Ghz; 166 MHz FSB) OC to 170 FSB ~2.1 GHz...yeah, i'm 1337. I could try and push it farther, the volcano 7 that I have on it is going at full speed all the time, so I think I might have some leeway.

Radeon 9700 PRO A-I-W 325MHz to 330MHz

AMD K6-2 550MHz to 600MHz

[Samoa]

3200Barton @ 2.4Ghz 420FSB 1.85v MSI KT6 Delta

[BananaMan]

I vary my OC all the time with my 2.4C, it runs stable at 3 GHz with default voltages with my Coolermaster Aero 7+, however I got it running at stock speeds right now because I haven't had the chance to push it back up after a bizarre incident where I pushed it a little further and it completely failed to POST with a BIOS checksum error. Made a downright amusing beep as well, it went from a higher tone to a lower in a screechy style of a beep like an old tape player losing power.