List Your Overclocks..

[Premgenius]

NONE

[-=||MIKE||=-]

Noone, So far :shifty:

[Samoa]

NONE

yeah thanks for spamming.

[Samoa]

3200Barton @ 2.4Ghz 420FSB 1.85v? MSI KT6 Delta

Edited October 3, 2003 by Samoa

[Homer]

3200Barton @ 2.4Ghz 420FSB 1.85v? MSI KT6 Delta

http://home.hawaii.rr.com/athlon2400xp/240...zBarton3200.png

http://home.hawaii.rr.com/athlon2400xp/240...ton3200pic2.png

Nice one Samoa... but aint yer CPU a little hot... and yer CPU Fan RPM is 0 haha:pp

[William]

Yeah that is a little hot, and I'm betting that's just the Socket temperature. The Diode sensor would be quite a bit higher as much as 10 degrees. Samoa, I suggest you get MBM 5 and try to get a reading from the CPU Diode sensor, it's great that you got an extra 200MHz from the 3200+ but at those te,ps you need extra cooling or a good heatsink.

My Overclock:

Barton 1.84GHz (2500+) @ 2.2GHz (3200+)

Kingston HyperX 2x256MB pc3200

[enigma-penguin Veteran]

hahah nice samoa

[Samoa]

3200Barton @ 2.4Ghz 420FSB 1.85v? MSI KT6 Delta

http://home.hawaii.rr.com/athlon2400xp/240...zBarton3200.png

http://home.hawaii.rr.com/athlon2400xp/240...ton3200pic2.png

Nice one Samoa... but aint yer CPU a little hot... and yer CPU Fan RPM is 0 ha:p :p

It's the Vantec Aeroflow...my board doesn't read it most of the time, but with the case open I can clearly see the fan blades moving. And the sensors aren't displaying the correct temp either. I have yet used my laser themometer to verify temps at 2.4ghz. At 11x200, it is still pretty close to those temps in that pic, but in actuality the temps are around 38C. For the Chipset and Cpu.

I am waiting for a fan set to come. Once it does I will mount it to blow on the board where it gets pretty hot, and with an upgrade in my ram i will OC it to 2.4ghz and beyond...up to 2.6ghz maybe..

Edited October 3, 2003 by Samoa

[unexpected]

P4 1.8A @ 3.06GHz aircooled @ 1.75V ... now it's at 2.8GHz default voltage because I don't think the extra voltage is worth the 200MHz speed gain I won't even notice ;) ... watercooled it reaches 3.2GHz :)

It is a B-stepping one ... not the C's that do 3GHz from the box or the even sweeter D's :p ...

[Samoa]

Well, I just confirmed it. For the most part. Currently, my system is OC'ed to the 2.4ghz 420fSB 1.85v and it is for the most part keeping much kooler, even during game play. I think it isn't completely stable yet due to the ram and the limitation of this board. I can't seem to run a higher vcore. Either of which would surely put me stable, and possibly allow me to run even higher.

So until I get better ram this it, as it appears. :D

Oh yeah, forgot to mention. I did get those fans today, they really don't blow as hard as I would like, but they do a good job. So I have a total of 7fans in my case keeping it kool. :cool:

[Ecander]

P4 [email protected] 1.6v aircooled...I want to push it harder but right now I cant afford new ram to keep the fsb and ram sync 1:1 so 909mhz fsb is where its at right now lol.

[tr1kstanc3]

CPU overclocks =)

pentium mmx 133 => 150

k6-2 300 => 333

celeron 300a => 504

celeron 366 => 550

celeron II 533 => 800

celeron II 566 => 850

athlon 1ghz => 1.13ghz

athlon tbrd 1.4ghz => 1.753ghz

athlon tbrd 1.47ghz => 2.2ghz (current system)

[AntarcticPL]

New here, but i think i'll like it... :shifty:

Pentium MMX : 166 -> 200

AMD K6-2 : 450 -> 500

AMD K6-2+ : 450 -> 550 (whoops, core voltage too high, black screen, CPU worked for 3 minutes :x )

Pentium 4 : 1,8 Ghz -> 2,1 Ghz

Pentium 4 : 3,06 Ghz (fast enough, reached 3,3 Ghz but CPU becomes tooo hot (+70?C when playing Unreal tournament) so back to normal)

Great discussion centers here

greets

[Max Veteran]

All my overclocks:

Pentium 60 > 66

Pentium 120 > 133

Pentium 200 > 233

Pentium III 800 > 875

Pentium IV 2.66 > 3.08

[Homer]

AMD XP 2400+ (2ghz) >> AMD XP 2600+ (2133mhz)

[Steven]

I just broke 8000+ in PCMark2002. (Y).

I skipped the Hard Drive Test.

P4 2.4C @ 3.3GHz (2.5-3-3-7) @ 5:4 Memory @ 440Mhz (AIR COOLING)

Its amazing how much money overclocking saves you! My System is completely Stable. I have not raised the vCOre on my proc which basically does not make the processor last less. Using ThermalTake Spark 7 HSF.

Project @ FutureMark:

http://service.futuremark.com/compare?pcm=1551359

Edited October 13, 2003 by xStainDx

[devBrian]

Celeron 366MHz -> .41GHz

When you put it in GHz, it sounds big :(

I refuse to overclock my Athlon XP and my Duron, as I have no cooling at the moment.

[Zombie9920]

Currently running my P4 2.4c @ 3.2ghz. Stock Intel cooling and default Vcore(1.525v).

Update, it is @ 3.24ghz now. Default VCore, stock cooling.

Edited October 13, 2003 by Zombie9920

[enigma-penguin Veteran]

got ultimatly bored at 5 am..... decided i couldnt wait for my new ram and proc to oc

amd xp 1900+ palomino

pc2100 at 151 fsb = 302mhz <--- hahah didnt think it'd go there

had to up vcore 7% tho (hit 37 degrees) and ram voltage to 2.7

lol dont laugh i was just bored.. tho i ran sandra when i was runnin wmp9 and a few toehr things so that score is a little bogus

[seethru]

I oc'd my AMD Athlon XP 2500+ to 2.3ghz, vcore is up to 1.75 for stability.

[Samoa]

I decided to include my HD as it is a feature on the board as well. Like HT is to Intel, lol. Other's are just chicken. :p Oh and I didn't need to increase my vcore...

[enigma-penguin Veteran]

chicken eh... lol

you oc to a 300mhz fsb with pc 2100 ^_^ i even managed 311 before it died

[Samoa]

chicken eh... lol

you oc to a 300mhz fsb with pc 2100 ^_^ i even managed 311 before it died

I meant posting the HDD scores ;)

current OC 3200 Barton @ 2.38ghz 432FSB

Need better ram to do past the 2.4ghz stable.

[Jason S. Global Moderator]

athlon 2000+ (1667mhz) at 1800mhz lol hellz yeah! :laugh:

[tickbabies]

here we go, amd 2500 with 3500 kingston hyperX