List Your Overclocks..

[Khujo]

My latest overclock

[Ritalin]

So all you did was make the fsb bigger? and what about the bus speed thing? did you change that or is it manual?

you left the voltage manual?

my ram is at 2.5 3 3 8 (replacing 4 by 3).

My mobo will only let me put either 100, 200, 300 or 400... no clue how to do anything else.

Ritalin

[ultimaxslc]

hi there. im a newbie to hardware stuff. can some kind soul please enlighten me on the basics and technical details of overclocking? thnx in advance.

[Khujo]

So all you did was make the fsb bigger? and what about the bus speed thing? did you change that or is it manual?

you left the voltage manual?

my ram is at 2.5 3 3 8 (replacing 4 by 3).

My mobo will only let me put either 100, 200, 300 or 400... no clue how to do anything else.

Ritalin

In my bios It has options for Auto, 266, 333 and 400, If i set it to Auto and crank the bus speed up it changes the divider to 5:4 lowering the memory speed. When i set it at 400 it keeps the bus and memory speeds in sync 1:1 leading to a lower overall clock speed but much better performance do to lack of bottlenecks. I run my memory at 225MHz or DDR450 and the FSB runs at 900MHz QDR. i've left my voltage settings at defaults, ive tried higher ram settings/voltages but can't get any higher then 228MHz and i just backed it to 225 for added stability, they CPU runs at around 30C with folding running in the background.

[RealyPssd]

My AMD Athlon 1.2GHz (266) did 1.656GHz.

My current AMD Athlon XP 2500+ Barton is doing 2.250GHz (3200+; 180x12.5) with the stock cooler, and no case cooling.

My ATI Radeon 64MB DDR VIVO did 234/216 up from it's default of 183/183, with stock cooling.

My current ATI Radeon 8500 64MB has done 324/328 so far up from 275/275, I've done the pencil trick VMod to the card, on stock cooling again.

[Twisted Maniac]

So all you did was make the fsb bigger? and what about the bus speed thing? did you change that or is it manual?

you left the voltage manual?

my ram is at 2.5 3 3 8 (replacing 4 by 3).

My mobo will only let me put either 100, 200, 300 or 400... no clue how to do anything else.

Ritalin

i got the same mobo...i set the mem to 320 (did not have 333) and i set my fsb to 250 (i'm playing safe :p)

[Qba73]

2.8c @ 3.5 DDR500 2-3-3-7 timings

[Section8]

overclocked a barton 2500+ to a 3200+

using a shuttle SN45G N-Force 2 Barebones System

Corsair XMS3200C2 256MB

temp 52 C

core voltage 1.85

using standard cooling supplied with system...

[Khujo]

My latest upgrade, got a 3.0C with mobo and winxp real cheap, and put the chip in this system with my normal 1:1 225MHz memory:fsb

[Khujo]

and some more tweaks, memory to 2.5-3-3-7 and fsb at 226 netted 19502 3dmark01 and

[funnyperson1]

My system is a 1700+ TbredA currently running at 1.93 with an fsb of 215 and a multiplier of 9.0.

Right now I'm at college and run the ystech 40 on my SK6+ at 7V and there is no AC.

Back at home this chip was running at 230fsb with a multiplier of 9 for 2.07GHZ.

Mobo is Shuttle AN35Ultra, ram is 2x256 Geil 3500.

I have been overclocking for a really long time though and my other rigs were:

Iwill VX133u, Tualeron [email protected] (152fsb, HELL OF A CHIP)

Asus P3V4X, PIII600E@864mhz (my first oc, always remain special)

[N_B]

My good ol' T-bird 1.266Ghz @ 1Ghz.

:D

[ edit: I just remembered, I also have an old AMD K6 300Mhz@333 ]

Edited November 6, 2003 by N_B

[Twisted Maniac]

My good ol' T-bird 1.266Ghz @ 1Ghz.

right...so u did not OVERclock but u did a DOWNclock :huh:

hehe...or should it be: [email protected]? :p

[Qba73]

check the sig for details. 300fsb p4 2.4c "M0" 1.60vcore

[Twisted Maniac]

damn man..that;s a lot!...is that all becuz of the "m0"?

i have a "D1" 2.6ghz....staindx told me i could go as far as 3.5ghz but now i'm seeing yours i think i can try and go a little higher :p

[Qba73]

damn man..that;s a lot!...is that all becuz of the "m0"?

i have a "D1" 2.6ghz....staindx told me i could go as far as 3.5ghz but now i'm seeing yours i think i can try and go a little higher :p

well there are "D1"s that go that high too but its not too common. from my research i have noticed that a majority of the "M0"s clock extremely high, stable and most importantly run real COOL temp wise.

i have noticed as well as others that the "M0"s transistor layout on the bottom is identical to that of the EE chip while the D1's have 5-6 or so missing on the bottom. i wonder if this has to do with the greatly improved overclockablilty of the M0.

[Khujo]

had my ASus board die on me for some strange reason, was forced to use an MSI for the time beng, while it overclocks higher it is still much slower in memory times even at lower latency, I can't wait to get my ASUS BACK!

[uber-pea]

My overclocks so far. :D

Athlon 64 3200+ (2ghz) @ 2.3ghz

Athlon XP 2500+ (1.83ghz) @ 2.1ghz

Athlon XP 1700+ (1.47ghz) @ 1.7ghz

Pentium pro 166 @ 200

Pentium 90 @ 120

and i did something with a 486-DX4 100mhz, but i cant quite remember :p

alot of those were quite a while ago, so if i got anything wrong, please forgive me :)

[Samoa]

I got my 2800 Barton at 2.26ghz 431FSB (10.5x215) vcore 1.7

I notice no temp change from 2.2ghz 400FSB (11x200) due to the vcore being the same.

Uber-pea, you should be able to get your 2500 at the same specs as my 2800.

[uber-pea]

i gave the 2500+ to my brother, but i told him how to do it, he's gonna try it in an hour or so :p

thanks for the pointer man :)

[Khujo]

i can't believe it compaqs gamer X machine is pimped out, (except the video card... )

Asus P4C800 Hynix ram that boots DDR480 2x 120 SATA raid 0, and its a COMPAQ!

and it overclocks awesomely with air cooling and a nice coolermaster aluminum case

[Samoa]

Ok so my final OC (for now)

Is 2.27ghz 433FSB v1.7 (10.5x216) and appears highly stable. :D

[Samoa]

Ok so my final OC (for now)

Is 2.27ghz 433FSB v1.7 (10.5x216) and appears highly stable. :D

it wasn't as stable as I hoped. Back down to 214x10.5

[TheLegendOfMart]

Intel Celeron 300 oc'ed to a very stable 512mhz :) In fact, I'm on it right now

Jeez a blast from the past, i remember o/c my old Celeron 300 to 800mhz, now they were stable, extremely overclockable cpus...

[Harsesis]

lol

Athlon 800 to 887 111x8

Its supposed to be easier to overclock my old pos by opening the processor up and changing the multiplier, but I'm too lazy to do that and new pc is comming soon :p