List Your Overclocks..


Recommended Posts

i got my ati silencer 4 today and overclocked my x800xt from 500/500 to 594/621. not too shabby. she idles around 30 and under load goes up to mid to high 40's. i think i can

get this card to do 600 core with a little fooling around  :ninja: 3dmark'03

585069266[/snapback]

What do you use to check the temperature of your graphic card processor?

i got my ati silencer 4 today and overclocked my x800xt from 500/500 to 594/621. not too shabby. she idles around 30 and under load goes up to mid to high 40's. i think i can

get this card to do 600 core with a little fooling around  :ninja: 3dmark'03

585069266[/snapback]

Load at high 40's? That must be a lie. Typically, the idle is equal or higher than that.

Athlon Mobile 2500+

FSB: 233

Multiplier: 10.5

Voltage: 1.844

Cooling

Heatsink: Si-97

Fan: Thermoflow 92mm (replacing with a panaflo soon)

Temps:

Idle: 49c

Load: 55c

note: temps are so high because the shoddy thermoflow refuses to run at more than 1700rpm!! with my old tornado temps were considerably cooler)

Gfx Card:

Geforce 6600gt

Core: 598

Mem: 1.2ghz

post-19998-1103436356_thumb.jpg

The vcore limit for most athlons is actually 2.0 ;) (on paper anyways) but most would suggest not jumping it as high as 1.9....

I'd probably experiment with dropping it a little maybe 1.8-1.85 even 1.75 to see if it still runs stable

Regardless , a nice oc you've got there (Y)

Cyrilix: What the hell are you talking about?

585124910[/snapback]

The x800 XT PE temperatures. It might be different on different sensors, but typically people report that they reach 70-80 at load. I'm not very experienced at what programs to use to detect temps, but I can't doubt what I've seen.

Naturally, you might say, they are using an X800 XT, but this one is overclocked way past XT PE. Anyway, if you guys think it's possible, tell me how you've achieved it and what program you are using to detect the temps, but 40 some at load just boggles the mind.

Edit: Well, I found a site where it was claimed that temps dropped to 50. Maybe I'm just wrong. *shrug*

Edited by Cyrilix

well, this is my little gem :p

mobo: MSI 865PE Neo2

main memory: 2*256 ddr pc3200 @dual channel

temps: idle: 33'C

high load: 42'C =>running doom3 or call of Duty or editing with blender and photoshop a same time

Cooling: heatsink build in copper by myself

fan: I catch one motor of sunflower :p

case: build by myself aluminum and plexiglass w=290mm, length=570mm, height=660mm

internal fans: unnecessary

lights: none I don't like <already have one into chipset anyway>

color: black

Graphic card: LOL :laugh: I forget overclock it, but is one poor gfx5200 128mb

works like a charm :heart: (Y)

post-45064-1103682113_thumb.jpg

CPU=AMD AthlonXP 2500+ Barton

FSB=200MHz

Multiplier=12.5

Voltage=1.9v

Conditioning: Thermaltake Extreme Volcano-12

Temperature readings: Idle:~39c // FullLoad:~49c.

OverClocking: ~1.8GHz - ~2.5GHz

http://members.cox.net/epyk/CPU.jpg

585127172[/snapback]

thats a very nice OC, I have a barton 2500+ too, but however no matter what cpu cooler i changed to, my cpu just can't OC...:(

I envy you....

I have two overclocked systems, my desktop and my laptop.

Laptop: Asus M6Ne

Pentium M 715 (Dothan 1.5 GHz at 1.36 V stock) running at 15x121=1815 MHz with vcore of 1.36 (max), temps 55 C load with fan off, 45 C with fan at 3600 RPM, 45 C idle with fan off, 40 C with fan at 3000 RPM (fan can't be controlled)

Mobility Radeon 9700 64 MB (stock 390/205) at 540/260

Desktop:

Asus A7N8X-X + Athlon XP 2500+ Mobile (Barton 1.8 GHz at 1.45 V stock) running at 11.5x200=2300 MHz with vcore of 1.75, temps 45 C idle, 50 C load with Volcano 9 at 3000 RPM

MSI Geforce 4 Ti 4200 64 MB (stock 250/513) at 310/580

I will give empty's 10.5x233=2446 at 1.844 V a try later...

Edited by Cephas

hey this is my first time posting here well i oc my vid card it is

6600GT from 500mhz/1.0ghz to 552mhz/1.16ghz

tthe current temp is 52C

i wanted to oc my processor which is AMD AThlon XP 3000+ Barton

but im nto sure how to, i found to sites

http://www.amdzone.com/index.php?name=PNph...5342c3f036bf5a6

and

http://www.a1-electronics.net/AMD_Section/...clk_Feb03.shtml

which one looks good to u?

or do u have a better way plz help

o yea here is wat i have

motherboard: ASUS A7V8X-X

ram: 512 DDR (1)

power supply: 350v

hardrive: Seagate 40GB

Western Digital 160GB

vid card: XFX Geforce 6600GT

processor: AMD Athlon XP 3000+ BArton

current case temp: 29C

Nice existz, I still havent broken the 10,000 mark in sisoft (then again I am on a 2400+ desktop version)

I cant wait to get up to the AMD64's :D because thats what I'll be aiming for, roughly 2.5ghz. (hopefully the watercooling will come in handy there)

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DiskGenius 6.2.0.1829 - All Versions: Free, Lite & Portable by Razvan Serea DiskGenius is a full-featured partition manager, which is designed to optimize disk usage for Windows users. It will efficiently help you recover lost data, resize/split partition, backup files, edit hex data, check bad sectors, manage virtual disks, erase data, etc.. Create a system image backup for current Windows with simple clicks to keep the operating system under protection. DiskGenius key features: Partition Management - It can create format, resize, extend, backup, split, hide and clone partition, both MBR and GPT are supported. Disk and partition conversion - Convert dynamic disk to basic, convert virtual disk format and convert MBR to GPT, convert primary partition to logical. File recovery - It can recover files deleted or emptied form recycle bin, recover files from damaged partition or disk and recover files by file type and supports file preview and file filter. Partition recovery - It is the best partition recovery program in that it can recover files from damaged, corrupted and RAW partitions, search for lost partition and recover files from it, besides, it can fix partition table. RAID recovery - It can reconstruct Virtual RAID and recover files from it, and all RAID types are supported. Sector Editor - A Hex editor is embedded to help users edit raw hex data and recover data manually. Backup and Restore - It can backup and restore partition including system partition, hard disk and partition table. Bad Tracks - It can check and repair bad sectors for all storage devices; check hard disk S.M.A.R.T. information. Delete files permanently - It can delete files permanently so that they can't be recovered by any data recovery software. Virtual Disk - It supports virtual disks, including VMware, Virtual PC and Virtual Box. Create WinPE bootable disk and you can manage disk partition when system crashes or there is no operating system on your computer. Support FAT12/FAT16/FAt32/exFAT/NTFS/EXT2/EXT3/EXT4 file system format. DiskGenius 6.2.0.1829 changelog: Add the "Disk Speed Test" feature. Add the "Windows Boot Repair and Conversion" feature. Add the BMB21-2019 erase standard to the "Erase Sectors" feature. Add support for restoring an individual partition from a PMFX disk image file. Enhanced The "Verify Or Repair Bad Sectors/Blocks" feature displays disk read speed in the detection window during scanning. The "Quick Partition" dialog box allows users to quickly select the number of partitions by pressing the numeric keys 1, 2, 7, 8, or 9. The "Set Volume Name" dialog box supports selecting preset volume labels provided by the software. The "Copy Sectors" feature supports resuming copy tasks after modifying the number of skipped bad sectors. Add the "TRIM Optimization" option to the format dialog box. The "Clone Partition" and "Clone Disk" features perform TRIM optimization on target partitions or disks before cloning. Add support for Not Equal To search conditions (prefixed with "!") when searching hexadecimal data in the sector editor. Optimize the display of capacity values in the program interface to show two decimal places. Add a minimize button to dialogs that may require long processing time. Enhance support for the ReFS file system. Enhance support for newer HIF and MP4 formats when recovering files by type. Enhance support for the EXT4 file system. Enhance compatibility of the "File Recovery" feature with special data structures. Fixed Fixed the issue that the selected file system type automatically reverted to NTFS after changing it to exFAT or EXT4 in the "Quick Partition" dialog box. Fixed inaccurate Unicode string search results in the "Sector Editor" feature. Fixed the issue that exceptions might occur when adding multiple disks in the "Erase Sectors" feature. Fixed the issue that insufficient target disk space was incorrectly reported in some cases when cloning, backing up, or restoring disks. Fixed the issue that folder modification timestamps were not preserved when copying files from ReFS partitions. Fixed the issue that Excel-format reports generated by features such as file copying or bad sector checking could not be opened when the report contained more than one million rows. Fixed the issue that folders were not displayed in the exclude-folder dialog box when backing up partitions to image files. Fixed the issue that the "Erase Sectors" feature could not be executed in some cases. Download: DiskGenius 6.2.0.1829 | 63.9 MB (Freeware, paid upgrade available) Download: DiskGenius Portable 64-bit | 40.0 MB Download: DiskGenius Portable 32-bit | 36.0 MB Download: DiskGenius Lite 64-bit | 13.4 MB Download: DiskGenius Lite 32-bit | 11.6 MB View: DiskGenius Home Page | DiskGenius Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Really? Use a better search engine https://www.google.com/search?...ourceid=chrome&ie=UTF-8
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      182
    3. 3
      PsYcHoKiLLa
      143
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      74
  • Tell a friend

    Love Neowin? Tell a friend!