• 0

Where does FNPLicensingService.exe come from?


Question

Recommended Posts

  • 0
go with foxit you wont get this kinda stuff with it,adobe is very big apps and very hungry too ffor resources.

Huh???

I guess that'd be fine...for people only wishing to >view< PDFs.

It's been said before: Acrobat is not just a reader, whereis Acrobat Reader >is< just a reader.

  • 0

I have Acrobat Pro 8 and Photoshop CS2

I do not like at all the idea that such a silent service could spy us...

It is against private rights to not explicitly indicate to the user what kind of services will run with the installed software

so, it is essential to crack such a service

I am not a specialist in computer, but I block connexion of FNPLicensingService.exe with internet throught the Vista firewall options

It seems that Acrobat is running ok, but I am not sure that the FLEXnet service can not much communicate with the outside...

also, is there no way to indicate to Acrobat (via the the registry or a patch) that the FLEXnet service is on whereas the service would be turn off?

bye

Seb

  • 0

CutePDF Writer is a free PDF writer.

How exactly can I block a program (eg. FNPLicensingService.exe) from accessing the Internet. Is a Firewall indispensable for this?

Thx in advance

Sandro aka Merecumb?

Yes, a firewall is what you would use to block an application from accessing the internet.

My problem with FNPLicensingService.exe is not the activation spying or accessing the internet, but with the buffer overflows I see associated with its use.

Though I am not personally aware of any exploit(s) that take advantage of a bug in the application, it is certainly probable that someone has looked into it:(:(

For what it's worth, this PDF from Macrovision is the FLEXnet licensing end user guide.

For those looking to keep FNPLicensingService.exe from running again, you can try this:

1) make sure you're not running any application that relies on the service

2) make sure the service is not running...you can either stop it via the services control panel app or by killing it in task manager, etc.

3) search your HD for FNP_Act_Installer.dll and rename it (i.e. FNP_Act_Installer.dll.OLD)

Apparently, that's the only way to keep the service from getting restarted. As you know, disabling in the Services Control Panel Applet does not actually disable it as Adobe utilizes svchost.exe to re-enable it.disclaimer: if you stop/disable FNPLicensingService.exe and rename all instances of FNP_Act_Installer.dll, your Adobe products may not function properly or may even crash. If you run into problems, simply rename the file back to its original name. I provide this information for educational purposes, only. I do not advocate attempting to circumvent licensing schemesb>

[edited to add PDF url & add suggestion on how to keep FNPLicensingService.exe from running again]

Edited by earthsound
  • 0
So far aftr disabling it .. it's running well. My CS3 Photoshop that is.

Are you referring to disabling the FLEXnet service via the Services Control Panel app? If you do that and do not rename FNP_Act_Installer.dll, then Adobe will re-enable it eventually via svchost.exe. I don't have Photoshop CS3 to confirm what it does, but I know that Acrobat Pro 8 will do this.

If you didn't rename the .dll, then check your running processes again after a while & see if FNPLicensingService.exe is running. :|

  • 0
I see what keeps putting it back in play. The Acrobat Assistant seems to be the problem. Here is how I stopped it from showing up anymore.

First kill Acrobat Assistant from your HKLM / Run registry entry.

Then stop and disable the FLEXnet Licensing Service.

Or, I've included a reg file that will remove the Acrobat Assistant autorun entry and disable the FLEXnet Licensing Service in case you aren't registry or services savvy. Run that file and kill the FNPLicensingService.exe from Windows Task Manager and you shouldn't see it anymore.

Thanks Mike!

  • 0

Came across this thread scouring google for answers to my dilemma. The FNPLicensingService has been recently seemingly out of the blue (when not using Acrobat or reading PDF's) trying to access my Kaspersky Anti-Virus security settings. Kaspersky pops up with a warning that this service is trying to change KAV. The problem is, when I block it, it keeps trying at an alarming rate of what seems like hundreds of times per minute (I checked after 10 minutes and it was at roughly a hundred thousand and counting) This process was slowing down my system considerably.

Stopping it in Administrative Tools, Services, didn't work for me, and the Task manager didn't work either. So this is for anyone that has my issue and wants to just stop it cold without uninstalling it. I used a program called IceSword, which is a Chinese Rootkit eliminator (the English version) and sort of like a more comprehensive version of Task Manager/Process Explorer (I've yet to run in to a program/dll/exe that it couldn't stop cold). It can see everything on your computer (even under the API). With that open I just looked in current processes and found FLexNetLicensingService and killed it dead with Terminate.

Hope that helps anyone that has my issue.. IceSword is quite powerful.

Edited by PsiKnife
  • 0
i think its the adobe licensing service (if that hasn't been said yet :p)

To answer/solve the entire topic (bump)!

About:

This is the running process of a security lock-out program distributed by Macrovision

It creates/recreates a hardware spicific key to lock a serial number/access number for software to a spicific computer

It "phones home" every time the locked program is loaded to verify that the software is being used on the correct computer.

What installs it:

As said before, mainly high end software AND MOST current Adobe products, (ALL current Adobe multi-program packages)

The licensing fee for the software is astronomical so you probably won't find it on anything costing less than a few hundred dollars, nor from a non-party company that has a small intended user base.

Why remove:

It "phones home"

It falls into the liberal (free from spying) definition of spyware, as it sends a complete list of installed hardware and software information in a low-encryption translation to the licensee.

On Acrobat alternatives; Foxit Pro is a PDF CREATOR, a fraction of the cost (pricing that matches the task, not ego inflated), NO spyware included, and includes all the functions that the vast majority of PDF readers/creators would need.

  • 0

If you've got the time and the savvy, I would think that another way to stop it would be to run Ethereal/Wireshark and find out where it's trying to connect to, and then kill access to that IP at your router/firewall.

  • 0
On Acrobat alternatives; Foxit Pro is a PDF CREATOR, a fraction of the cost (pricing that matches the task, not ego inflated), NO spyware included, and includes all the functions that the vast majority of PDF readers/creators would need.

Thread is dead but..

Acrobat still does allot more then just making pdf file. believe it or not.

  • 0
i have the same problem, FNPLicensingServer, after i installed adobe acrobat pro 8.

my solution is:

1. kill the process "FNPLicensingService.exe" from the Task Manager

2. go to \Program Files\Common Files\Macrovision Shared\FLEXnet Publisher\ and delete the 2 files "FNPLicensingService.exe" and "fnp_registrations.xml" and instead create 2 folders with the same name/extension.

when you start acrobat now it wont be able to create those 2 files which you have deleted and replaced with the folders, so FNP service wont be able to start.

i hope this helps for everyone.

:whistle:

Yes this works on "killing the process" however all other Adobe programs wont start...I get an error message stating "this program can not be used at this time. Please uninstall and reinstall to correct the problem" after I follow this procedure all it does recreate the FNPLicensingService.exe and fnp_registration.xml all over again.

  • 0

I've been living with this service hogging my resources for some time, never really found a way to kill it as I had covered every way mentionned in this thread.

My trick is not a hack or patch or anything like that, I blocked the service from accessing the net and i just kill it everytime i use any adobe product. I think you should get used to this because, IMO, I really doubt there will ever be a way to circumvent this spying aptely named licensing.

Cheers!

  • 0
I see what keeps putting it back in play. The Acrobat Assistant seems to be the problem. Here is how I stopped it from showing up anymore.

First kill Acrobat Assistant from your HKLM / Run registry entry.

Then stop and disable the FLEXnet Licensing Service.

Or, I've included a reg file that will remove the Acrobat Assistant autorun entry and disable the FLEXnet Licensing Service in case you aren't registry or services savvy. Run that file and kill the FNPLicensingService.exe from Windows Task Manager and you shouldn't see it anymore.

If you install this guys regedit like me all of your adobe aps will quit working, jsut try opening different programs by adobe untill one works then go back and open your other one (photoshop and flash for me) it will be fixed.

Edited by certa
  • 0

Hi. I'm facing the same problem as all of you are. I installed photoshop CS3 and the mentioned process appeared. I am a bit frightened about the "calling home". I have taken all of it's rights to access internet in zonealarm pro, but still, maybe someone with good programming skills should make a dll injection which would kill the process everytime the product runs?

Cheers

Cadaveryne

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • LosslessCut 3.69 by Razvan Serea LosslessCut aims to be the ultimate cross platform FFmpeg GUI for extremely fast and lossless operations on video, audio, subtitle and other related media files. The main feature is lossless trimming and cutting of video and audio files, which is great for saving space by rough-cutting your large video files taken from a video camera, GoPro, drone, etc. It lets you quickly extract the good parts from your videos and discard many gigabytes of data without doing a slow re-encode and thereby losing quality. Or you can add a music or subtitle track to your video without needing to encode. Everything is extremely fast because it does an almost direct data copy, fueled by the awesome FFmpeg which does all the grunt work. Features Lossless cutting of most video and audio formats Losslessly cut out parts of video/audio (for cutting away commercials etc.) Losslessly rearrange the order of video/audio segments Lossless merge/concatenation of arbitrary files (with identical codecs parameters, e.g. from the same camera) Lossless stream editing: Combine arbitrary tracks from multiple files (ex. add music or subtitle track to a video file) Losslessly extract all tracks from a file (extract video, audio, subtitle, attachments and other tracks from one file into separate files) Batch view for fast multi-file workflow Remux into any compatible output format Take full-resolution snapshots from videos in JPEG/PNG format Manual input of cutpoint times Apply a per-file timecode offset (and auto load timecode from file) Change rotation/orientation metadata in videos View technical data about all streams Timeline zoom and frame/keyframe jumping for accurate cutting around keyframes Saves per project cut segments to project file View FFmpeg last command log so you can modify and re-run recent commands on the command line Undo/redo Give labels to cut segments View segment details, export/import cut segments as CSV Import segments from: MP4/MKV chapters, Text file, YouTube, CSV, CUE, XML (DaVinci, Final Cut Pro) Video thumbnails and audio waveform Edit file metadata and per-stream metadata Edit per-stream disposition Cut with chapter marks Annotate segments with tags View subtitles Example lossless use cases Cut out commercials from a recorded TV show (and re-format from TS to MP4) Remove audio tracks from a file Extract music track from a video and cut it to your needs Add music to a video (or replace existing audio track) Combine audio and video tracks from separate recordings Include an external subtitle into a video Quickly change a H264/H265 MKV video to MOV or MP4 for playback on iPhone Import a list of cut times from other tool as a EDL (edit decision list, CSV) and run these cuts with LosslessCut Export a list of cut times as a CSV EDL and process these in another tool Quickly cut a file by its MP4/MKV chapters Quickly cut a YouTube video by its chapters (or music times from a comment) Change the language of a file's audio/subtitle tracks Attach cover art to videos Change author, title, GPS position, recording time of a video Fix rotation of a video that has the wrong orientation flag set Great for rotating phone videos that come out the wrong way without actually re-encoding the video. Loop a video / audio clip X times quickly without re-encoding LosslessCut 3.69.0 changelog: Add lossless cropping & aspect ratio override via bitstream and container metadata #643 Alow shifting tracks for each file (-itsoffset) #216 Add "decimate video" tool to filter away all non-keyframes #2111 Add Windows ARM 64 native build with native ffmpeg Move timecode out of timeline and make it copy-able #2592 #2691 #2800 #483 #2808 Upgrade Electron to latest Add new "opposing" align mode #2654 Add FFmpeg -hwaccel auto setting for hardware acceleration of certain operations Add API events export-start and export-complete Allow deleting track metadata #2819 Improve shift segments dialog #2839 Show keyboard shortcuts inside button tooltips in UI Warn if trying to cut with too few keyframes around cutpoint #516 #2780 #2756 (Linux) include app name in notification #2794 Pull latest translations Other notable changes: Advanced output directory selector #2101 #2115 #2755 increase max file name length to 250 (truncation) #2779 don't reset playback speed when using special playback modes #2889 preserve chapters when merging files that already have chapters don't merge adjacent segments in combineOverlappingSegments #2896 don't transfer segment name when filling gaps #2754 always scroll up to zoom in #2703 #2786 increase max keyframes to 10000 Don't bind ctrl/cmd+c by default (they interfer with copying text) Many other improvements and fixes Download: LosslessCut 3.69.0 | ARM64 | ~100.0 MB (Open Source) Links: LosslessCut Website | Other Operating Systems | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Doesn't even need a UI for point 2 - use some sort of JSON/XML container - because MOST users won't even bother.
    • Legit concern or publicity stunt considering this is the first time I'm hearing the name?
  • Recent Achievements

    • Conversation Starter
      FBSPL earned a badge
      Conversation Starter
    • Week One Done
      I2D earned a badge
      Week One Done
    • Week One Done
      Dr Jared Dental Studio earned a badge
      Week One Done
    • Week One Done
      RG INVESTMENT GROUP earned a badge
      Week One Done
    • Very Popular
      The Norwegian Drone Pilot earned a badge
      Very Popular
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      PsYcHoKiLLa
      263
    3. 3
      Skyfrog
      85
    4. 4
      FloatingFatMan
      64
    5. 5
      Michael Scrip
      62
  • Tell a friend

    Love Neowin? Tell a friend!