• 0

[C#] Enabling DHCP on NIC through WMI


Question

I was testing SwitchNetConfig (code available at: http://www.codeproject.com/csharp/OazSwitchNetConfig.asp) but it's not working correctly...

I create a profile, select a nic card, select to obtain IP from DHCP but it's not correctly enabled. The result of the action will be red outline. What I want to do is in the blue outline. (I'm talking about the image attached)

Here's the code that tries to enable DHCP:

public static void SetDHCP( string nicName )
		{
			ManagementClass mc = new ManagementClass("Win32_NetworkAdapterConfiguration");
			ManagementObjectCollection moc = mc.GetInstances();

			foreach(ManagementObject mo in moc)
			{
				// Make sure this is a IP enabled device. Not something like memory card or VM Ware
				if( (bool)mo["IPEnabled"] )
				{
					if( mo["Caption"].Equals( nicName ) )
					{
						ManagementBaseObject newDNS = mo.GetMethodParameters( "SetDNSServerSearchOrder" );
						newDNS[ "DNSServerSearchOrder" ] = null;
						ManagementBaseObject enableDHCP = mo.InvokeMethod( "EnableDHCP", null, null);
						ManagementBaseObject setDNS = mo.InvokeMethod( "SetDNSServerSearchOrder", newDNS, null);
					}
				}
			}
		}

post-22268-1164509949_thumb.jpg

Link to comment
https://www.neowin.net/forum/topic/515984-c-enabling-dhcp-on-nic-through-wmi/
Share on other sites

11 answers to this question

Recommended Posts

  • 0

Just tested and here's what I've found out.

I have 4 items in my network connections, 2 of them disabled cuase I don't really use them (1394 Connection, Cisco Systems VPN Adapter). The other is my laptop's wireless card and ethernet card. It worked for the ethernet card, but for the wireless card, it happens has the screenshot above... I don't get it...

  • 0

I tested this on several other laptops and it seems to happen to all of them the same thing... One thing to note, is that, this only seem to happen to wireless network cards. One curiosity though, is that the ones I tested, are all the same: Intel® PRO/Wireless 2200BG

Can't anyone help me out with this? No one understands this WMI thing that could help me out?

  • 0
  Nazgulled said:

I tested this on several other laptops and it seems to happen to all of them the same thing... One thing to note, is that, this only seem to happen to wireless network cards. One curiosity though, is that the ones I tested, are all the same: Intel? PRO/Wireless 2200BG

Can't anyone help me out with this? No one understands this WMI thing that could help me out?

I don't have a wireless card so I wouldn't be much help. There are return codes for that method, EnableDHCP. Have you examined them? It returns an uint.

http://msdn2.microsoft.com/en-us/library/aa390378.aspx

  • 0

Ok, I just found something...

To get the return code, instead of using vb.net, I used vbscript. Created a file with a simple vbs script and tried the same stuff as the vb.net code above.

Anyway, I tried to enable DHCP to the wireless card with the vbscript and it worked, then I tried with my code without any changes, and it also workd, that's when I thought to myself that something was wrong... I decided to retest the not wireless card, and now, that one didn't work. After a few more repeated tests I came to this conclusion:

If the card is connected to anything (without the red X on the connection icon) it works to any of them, enabling DHCP works just fine. But if I try to enable DHCP to any connection not connected, I get the "bug" in the screenshot.

The return code, reported by the vbscript was this: 94 - Path, file, or object not found.

When it worked, the return code was (of course): 0 - Successful completion, no reboot required.

Now, I'm more confused than before... I don't understand the error 94... I have this:

If objNetAdapter.Caption = "[00000012] Intel(R) PRO/Wireless 2200BG Network Connection" Then
		errEnable = objNetAdapter.EnableDHCP()
		Wscript.Echo errEnable
	End If

And it obviously entered the If statement (cause the error code is reported), which means it founds the "object" (I guess?). How come it can't fully enable DHCP?

I think it makes a bit of sense, thinking that DHCP is supposed to find the ips to use in the card and if we are not connected it won't get any ips from anywhere, but it should at least "select" the option to obtain ip address automatically...

Any ideas?

  • 0
  Nazgulled said:

Ok, I just found something...

To get the return code, instead of using vb.net, I used vbscript. Created a file with a simple vbs script and tried the same stuff as the vb.net code above.

Anyway, I tried to enable DHCP to the wireless card with the vbscript and it worked, then I tried with my code without any changes, and it also workd, that's when I thought to myself that something was wrong... I decided to retest the not wireless card, and now, that one didn't work. After a few more repeated tests I came to this conclusion:

If the card is connected to anything (without the red X on the connection icon) it works to any of them, enabling DHCP works just fine. But if I try to enable DHCP to any connection not connected, I get the "bug" in the screenshot.

The return code, reported by the vbscript was this: 94 - Path, file, or object not found.

When it worked, the return code was (of course): 0 - Successful completion, no reboot required.

Now, I'm more confused than before... I don't understand the error 94... I have this:

If objNetAdapter.Caption = "[00000012] Intel(R) PRO/Wireless 2200BG Network Connection" Then
		errEnable = objNetAdapter.EnableDHCP()
		Wscript.Echo errEnable
	End If

And it obviously entered the If statement (cause the error code is reported), which means it founds the "object" (I guess?). How come it can't fully enable DHCP?

I think it makes a bit of sense, thinking that DHCP is supposed to find the ips to use in the card and if we are not connected it won't get any ips from anywhere, but it should at least "select" the option to obtain ip address automatically...

Any ideas?

As to getting the return code, just change the InvokeMethod to take a different set of args. MS did a bang up job of consistent API design there. LOL

// was this vv
//	ManagementBaseObject enableDHCP = mo.InvokeMethod( "EnableDHCP", null, null);
	object ret = mo.InvokeMethod( "EnableDHCP", new object[]{});
// ret can be cast to an uint and the code can be read.

I'll look into the second problem later, unless you figure it out. Just ran out of time tonight. Sorry.

  • 0

i don't know c# right off but i'm proficient with vbscript at the moment. i wrote a script to query all my nic cards and returns an output that mimics an IPCONFIG /ALL command from a DOS prompt.

initially it enumerated all the virtual adapters, wan miniport and ras async adapters but i used a few options to filter those out just to give me the true nic card.

first the Win32_NetworkAdapterConfiguration has a boolean IPEnabled that you'll want to set to true like this.

strComputer = "." 
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") 
Set colItems = objWMIService.ExecQuery( _
	"SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled=TRUE")

that should return only your LAN nic card.

from there you would then invoke the enable dhcp method but you have to specify which nic to do so. in your example you're using a specific string to test for but that's not always the best method since so many things can go wrong. so from the above code you'd loop through all the nics with only IPEnabled and use that nics deviceID as the index value and assign it so. like this...

For Each objItem In colItems
	intIndex = objItem.Index
	Set objNic = objWMIService.Get("Win32_NetworkAdapter.DeviceIDmp; intIndex)
Next

in the environment for which i wrote this there are other devices that were IPEnabled that i did not want since i only wanted a LAN nic or gigabit connection or whatever you want to call it - it's the nic that the cat5 feeds into.

so i used the NetConnectionStatus property for the Win32_NetworkAdapter class that we just created above like this.

For Each objItem In colItems
	intIndex = objItem.Index
	Set objNic = objWMIService.Get("Win32_NetworkAdapter.DeviceIDmp; intIndex)

	strNetConnectionStatus = objNic.NetConnectionStatus

	' a status of 2 or 9 means "connected" so we only get the nics that are online.
	If(strNetConnectionStatus=2) OR (strNetConnectionStatus=9)Then  
		   Set objShare = objWMIService.Get("Win32_NetworkAdapterConfiguration.Indexamp; intIndex & "'")

	   Set objOutParams = objWMIService.ExecMethod("Win32_NetworkAdapterConfiguration.Index='" & intIndex & "'", "EnableDHCP")

	   Wscript.Echo "Out Parameters: "
	   Wscript.echo "ReturnValue: " & objOutParams.ReturnValue
   End If
Next

i've tried to break it down step-by-step so here goes the whole deal to recap...

on error resume next
strComputer = "." 
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\CIMV2") 
Set colItems = objWMIService.ExecQuery( _
	"SELECT * FROM Win32_NetworkAdapterConfiguration WHERE IPEnabled=TRUE")

For Each objItem In colItems
	intIndex = objItem.Index
	Set objNic = objWMIService.Get("Win32_NetworkAdapter.DeviceIDmp; intIndex)

	strNetConnectionStatus = objNic.NetConnectionStatus

	' a status of 2 or 9 means "connected" so we only get the nics that are online.
	If(strNetConnectionStatus=2) OR (strNetConnectionStatus=9)Then 
		 ' get the nic by index
				 Set objShare = objWMIService.Get("Win32_NetworkAdapterConfiguration.Indexamp; intIndex & "'")

			 Set objOutParams = objWMIService.ExecMethod("Win32_NetworkAdapterConfiguration.Index='" & intIndex & "'", "EnableDHCP")

		 Wscript.Echo "Out Parameters: "
		 Wscript.echo "ReturnValue: " & objOutParams.ReturnValue
	End If
Next

btw, in your vbscript snippet there you don't have any type of error handling which is why it didn't work. basically it encountered an error and then stopped. up above i've told it to keep going if it encounters an error.

hope this helps.

Edited by pacifica
  • 0

That doesn't matter at all. The VBScript I did was just for testing, not fore real live enviornment using... I just wanted to see, if by using VBScript, I could really enable DHCP without having the problem posted in the screenshot in the first post. But it didn't work, the same thing happens.

As I described on my last post, the problem is that the EnableDHCP method won't work the way I want it if the NIC card is not connected to something... If the NIC icon in the Network Connections has a red X, the EnableDHCP method won't work. The IP will be set to 0.0.0.0 and the Subnet Mask to 255.0.0.0. If the NIC is connected, it will work just fine. That's the real issue here.

I appreciate your help, but I don't think your set of VBScripts will help me in anything...

---

Here's what I think I'll do to fix the problem:

1) With the help from WMI, get the SettingID from the NIC card

2) Enable DHCP directly in the registry

It seems to work fine with my tests. But I really wanted to just use WMI.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Apple CarPlay to let you stream iPhone videos to your car screen by Sagar Naresh Bhavsar In an official post for developers, Apple announced that CarPlay users will be able to watch iPhone videos on their car's display. This feature will be powered by Apple AirPlay, allowing users to stream videos wirelessly from their iPhones to their car's infotainment screen. For safety reasons, users will be able to enjoy videos on their car's display, but only when their vehicle is parked. Users won't be able to watch videos while the car is on the move. The connected iPhone will automatically detect when the car moves and will stop playing the video to avoid driver distraction. According to Apple, devs need to "integrate support for CarPlay with AirPlay video to enable this feature in your car." Carmakers will need to add support for CarPlay with AirPlay video to let users watch videos in their cars. So, this may take a while to roll out. Apple hasn't specifically mentioned whether it will be exclusive to the newly introduced and limited CarPlay Ultra, or standard CarPlay users will also be able to enjoy videos through AirPlay on their car's screen. Also, there is no clarity if existing models will get support via software update, or if it will be limited to newer models only. On the Android side, Google has also announced a bunch of new capabilities soon to be coming to Android Auto. The company has extended support for weather apps in beta for Android Auto and has confirmed that Android Auto will soon support video and browser apps as well. Image via Depositphotos
    • For a moment there I thought it speeds up Windows installation, but alas...
    • PNY's DUO LINK V3 promises truly incredible speed for a USB flash drive by Sayan Sen PNY today announced a new USB flash drive that blends modern design with high performance. The new DUO LINK™ V3 supports USB 3.2 Gen 2 and offers both Type-C and Type-A connectors. Housed in a metal shell with a matte black finish, the device is built for users who need reliable results when transferring and storing files. The drive is available in multiple storage sizes ranging from 256GB, all the way up to 2TB. According to PNY, the DUO LINK V3 is engineered to deliver read speeds of up to 1,000 MB/s and write speeds of up to 800 MB/s. These speeds are significantly higher than those achieved by standard USB 2.0 flash drives, allowing users to move large files. The product reminds us of the "Poxiao" flash memory we recently covered, which promises even more incredible speeds. The DUO LINK V3 flash drive’s design uses the common swivel mechanism with dual connectors. One side of the device features a USB Type-C connector, while the other side has a USB Type-A connector. This dual-connector system is intended to maximize compatibility, making the DUO LINK V3 useful across a broad range of devices, including smartphones, tablets, laptops, and desktop computers. Thus, in practical terms, users can easily manage files between newer mobile devices and traditional computers without needing extra adapters. Durability and ease of use are emphasized by the metal housing, which is designed to protect the drive during everyday handling. A built-in key loop further supports portability, an important factor for professionals who need to carry important data with them. The device also maintains backward compatibility with older USB standards such as USB 3.2 Gen 1, USB 3.0, and USB 2.0, ensuring that users will find it adaptable to many existing systems. The DUO LINK V3 flash drive is now available directly from PNY and through selected online marketplaces like Amazon. The pricing starts at $34.99 for the 256GB version and reaches $159.99 for the 2TB version. This release provides users with a tool that meets the growing demands of data-intensive work while remaining accessible to those needing a reliable and versatile storage solution. This article was generated with some help from AI and reviewed by an editor. As an Amazon Associate we earn from qualifying purchases.
    • Message from Campbell Wilson, MD & CEO, Air India: https://www.instagram.com/airindia/reel/DKzZQUPhafx/
    • I mean they have been proven to be safer than human drivers in many cases so at the end of the day they will be allowed on the road, the fact that you don't trust them doesn't mean that policy has to be changed to make you more comfortable I am afraid.
  • Recent Achievements

    • Week One Done
      fashionuae earned a badge
      Week One Done
    • One Month Later
      fashionuae earned a badge
      One Month Later
    • Week One Done
      elsafaacompany earned a badge
      Week One Done
    • Week One Done
      Yianis earned a badge
      Week One Done
    • Veteran
      Travesty went up a rank
      Veteran
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      ATLien_0
      263
    3. 3
      +FloatingFatMan
      193
    4. 4
      +Edouard
      174
    5. 5
      snowy owl
      125
  • Tell a friend

    Love Neowin? Tell a friend!