900mhz ram showing up as ddr2 800 on boot up?


Recommended Posts

Does it say 800MHz or PC6400?

When I'm OCing i need to tune "down" the speed since the memory speed follows the FSB. This results in that PC5300 or PC4300 shows up at startup, eventhough the RAM is running at say 800MHz.

Regarding another matter: I hope it also states Dual channel?

*edit*

I saw on Asus.com that your board only supports (original) speeds up to 800MHz.

  Quote
Dual channel memory architecture

4 x DIMM, max. 8GB, DDR2-800/667/533, ECC and non-ECC, un-buffered memory

I guess you have to "OC" the rest of the way.

What's your system specs'?

I know because of my OC the system shows mine running at 266Mhz even though it's actually at 400Mhz. But is is probably also the fact that the board only supports up to 800Mhz on the board. You aren't goinmg to get 900Mhz out of it without overclocking.

The system specs are:

550w PSU

AMD Athlon X2 5000+

2GB (2x 1gb) OCZ 900mhz ddr2 ram

asus m2n32 sli deluxe

320gb sata2 hard drive

How would I even go about overclocking the ram? Will it cause the temps to shoot up? Will it cause the ram any harm?

cheers

unlink the ram and push it to 450MHz (900MHz effective outcome) your board won't set 900MHz itself as it will only accept 533 667 800 and 1066 to get 900 1000 or similar speeds from these non-conforming dimms you need to set the parameters yourself.

You will most likely need to set the Voltage aswell as many 800MHz modules use 1.8v while the 900+ use 1.9v to 2.2v (Check which your RAM requires).

Temps will never shoot up... maybe 3 degrees hotter then before... if they already can go on 900 mhz why care with overclocking..

but then again maybe ur mobo wont allow it cuz of the processor

You don't need to OC your CPU if your multiplier is unlocked. Tune up the FSB and the RAM will follow, at the same time lower your multiplier so your core won't be OC. For example: [FSB]*[Multi], 250*12 = 3000MHz, "same as" 300*10 = 3000MHz but your bus has been OC 50MHz --> 100MHz OC of your memory. No need for changing the vcore, only vdimm. Make sure you lock you PCI-slots though (PCIE to 100MHz, PCI to 33,33MHz)

Hmmm i've set the dram voltage to 2.1v (the voltage it says on the OCZ site), i'm not sure about the FSB etc and don't want to balls it all up so i'll probably leave it at that (if just changing the voltage will make any difference?)

  randomnut said:

Hmmm i've set the dram voltage to 2.1v (the voltage it says on the OCZ site), i'm not sure about the FSB etc and don't want to balls it all up so i'll probably leave it at that (if just changing the voltage will make any difference?)

Altering the voltage won't make any performance difference. It may only help you overclock a bit further in terms of stability.

It's difficult for me to help you as I don't have an AMD system here and I've not used an AMD DDR2 system as yet.

on my Intel system I would unlink the DDR2 RAM from the FSB and set the RAM myself to 900MHz Effective, I would also set the voltage to 2.1V and set the timings to C2.

I don't know how it's done on AMD platforms as they don't even have a Front Side Bus due to the integrated memory controller. I think maybe you have to up your HT to overclock the RAM.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I am forced to use Windows for two reasons. The Adobe package does not run on Linux and I do not have enough money to buy an Apple M3 or M4. Otherwise I would have abandoned Windows a long time ago. I use Linuxmint on a virtual machine and it is clear how fast it is compared to the rigid Windows. We have had multi-core processors for a long time but they do not exist for Windows. They only think about useless things shoved down the customers' throats.
    • Yeah what can you expect in the first 4 years?? Where on your body is the Zune tattoo?
    • Microsoft still tries really hard to convince people about Windows 11. It does not realize, the harder it tries the more people hate it. And it is not people's fault. It is MS that tries violently to own your computing environment without your consent. Cheers MS!
    • I've got a basic black and white laser printer that's connected via USB and doesn't do wifi etc. I think I'm going to be just fine.
    • Edge 138 is out with AI-powered history search and other changes by Taras Buria Microsoft has released Edge 138, the latest major update for the browser. Version 138.0.3351.55 introduces some interesting changes and new features, such as AI-powered history search. There are also several bug fixes and security patches. For regular users, the biggest and most important change in Edge 138 is AI-powered history search. This feature allows you to find sites in your history using synonyms, phrases, or misspelled words. Microsoft uses an on-device model, which does not send your data anywhere. Note that this feature is rolling out gradually, which means it might take a few days or weeks to show up on your system. Another useful change is new performance notifications. Performance and Extensions Detector notifications may appear in the main menu when the browser detects performance dips to help users learn about available performance-optimization tools. Autofill settings received a new consent toggle, which allows Microsoft to improve the autofill capabilities by collecting field names as you browse. This only applies to field names, such as "First Name, "Email," etc. It does not send the data you enter or autofill to Microsoft. Other changes include the following: Use the Primary work profile as the default profile to open external links. With this feature, for Windows, Edge checks if the Primary Work Profile exists and makes it the default profile for opening external links if available. Microsoft 365 Copilot Chat Summarization in Microsoft Edge Context Menu. This feature helps users quickly unpack and ask questions about their open page. Copilot on the Microsoft Edge New Tab Page (NTP). Users may see suggested work and productivity-related Copilot prompts in their search box on the NTP page. Adding support for viewing Sensitivity labels applied to a Microsoft Information Protection (MIP) Protected PDF. Enterprise customers can view sensitivity labels applied to MIP protected PDF to be well informed of the data classification to enable them to handle such sensitive documents. And here is what was fixed: Fixed an issue that caused WebDriver automation to fail in Microsoft Edge versions 133 and later. Fixed an issue where re-enabled textarea elements remained non-editable. This issue affected activating a role assignment in Privileged Identity Management. Finally, Edge 138 patches six security vulnerabilities, three of which were Microsoft Edge-specific, and the remaining three originated from Chromium. You can find details about those fixes here. The next Microsoft Edge update, version 139, is expected in the week of August 7, 2025.
  • Recent Achievements

    • Week One Done
      suprememobiles earned a badge
      Week One Done
    • Week One Done
      Marites earned a badge
      Week One Done
    • One Year In
      runge100 earned a badge
      One Year In
    • One Month Later
      runge100 earned a badge
      One Month Later
    • One Month Later
      jfam earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      562
    2. 2
      +FloatingFatMan
      177
    3. 3
      ATLien_0
      168
    4. 4
      Michael Scrip
      123
    5. 5
      Xenon
      122
  • Tell a friend

    Love Neowin? Tell a friend!