Setting correct input delays on Harmony remote


Recommended Posts

I've got a Harmony 550 and a Samsung SlimFit 30" TV

To switch inputs on the TV, I have to go into the menu and scroll through them. Initially, the remote would pause for about 500ms between key presses, so it would scroll through the inputs list rather slowly.

I went into the harmony app and brought up the speed delay screen for the TV. I set the inter-key and input delays to 100ms. However, this only seemed to make things slower. The remote now paused about a second between 'key presses'. Well, the light would stay on for the whole second, so I'm not sure if it sends the signal and then waits a second, or if it sends the signal for a full second before sending the next one. Either way, it got slower, not faster.

So I went back in and set both delays to 0ms. Now the delay is closer to 2 seconds. This isn't making any sense. Can someone help me out here? What's the difference between the inter-key delay and the input delay? When is each delay applied?

did you mean "enter-key delay" and "input delay" ?

since I'm putting together a home theater with my roommates, I've been reading up on Harmony remotes. And by what I have read:

"enter-key delay" is the amount of time it takes between key-press and sending the signal to the device.

"input delay" is the amount of time it takes to switch from one device to another.

but by what you said... it sounds like the timings are wrong. If you don't remember what you've changed.. I would suggest starting from square one... wipe the remote and set it up again.

I should be getting my Harmony 360 by next week (I hope), so maybe I could give more help by then.

not quite. after some searching on logitech's support site, I tracked it down:

Power On Delay. When a device receives a PowerOn command, it takes a certain amount of time to "warm up" the device and resume normal operation. For most devices this happens very quickly, but for some devices, such as televisions and receivers, it can take up to 3000 milliseconds (three seconds).

Inter-key Delay. When a device receives an infrared command the device is considered"busy" while it processes the command. The amount of time required before the device will respond to another command is known as the inter-key delay, and normally ranges from zero to 300 milliseconds. Devices with long inter-key delays take longer to respond to multiple infrared commands (e.g., when changing television channels).

Input Delay. When a device switches inputs (e.g. goes from Video 1 to Video 2) the device is considered "busy" while it processes the command. The amount of time required before the device will respond to another switch input command is known as the input delay, and normally ranges from 500 to 3000 milliseconds. Devices with long input delays take longer to change inputs.

Inter-Device Delay. When an infrared command is sent for a particular device, each device in your system will receive the command, but only one will respond to it. The other devices will ignore the infrared command. Sometimes, when this happens, a device will ignore the infrared signal and then stop accepting infrared commands for a period of time. This period of time is known as the inter-device delay. During this time no infrared signals are generated by the remote. In rare cases this delay can be several seconds.

Right now I'm back at defaults for everything. I just swapped out my regular cable box for a shiny new HD converter, and I've been sick the last few days, so I haven't gotten around to changing anything yet. I may try a few things when I get home today.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Wikipedia has become hot molasses with mostly filth masquerading as truth. Most of it is the imagination of few writers who think of themselves as above god. The narrative setup is mind boggling.
    • he donates it all to his foundation to launder, trying to avoid inheritance tax while buying up africa
    • No. 1/10th the cost of a Mac? The Mini starts at 599. What mini-pc costs 1/10th of that? The OS is nothing like macOS. Sure you can make it look like it, but it won’t work anything like it. Applications won’t install, or remove the same. Application compatibility will be different. Managing the OS is completely dissimilar, the biggest common ground will be a few CLI utilities. You can definitely get yourself an inexpensive little setup that has a good Linux distro and be happy. It won’t be 1/10th the cost or essentially a Mac though.
    • Vivaldi 7.4.3684.50 by Razvan Serea Vivaldi is a cross-platform web browser built for – and with – the web. A browser based on the Blink engine (same in Chrome and Chromium) that is fast, but also a browser that is rich in functionality, highly flexible and puts the user first. A browser that is made for you. Vivaldi is produced with love by a founding team of browser pioneers, including former CEO Jon Stephenson von Tetzchner, who co-founded and led Opera Software. Vivaldi’s interface is very customizable. Vivaldi combines simplicity and fashion to create a basic, highly customizable interface that provides everything a internet user could need. The browser allows users to customize the appearance of UI elements such as background color, overall theme, address bar and tab positioning, and start pages. Vivaldi features the ability to "stack" and "tile" tabs, annotate web pages, add notes to bookmarks and much more. Vivaldi 7.4.3684.50 changelog: [Chromium] Update to 136.0.7103.170 [Crash][Mail][JSError] RangeError: Maximum call stack size exceeded (VB-115288) Download: Vivaldi 64-bit | 125.0 MB (Freeware) Download: Vivaldi 32-bit | ARM64 View: Vivaldi Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I must be doing something right because I feel like I don’t really come across that many cheaters. I’m not saying you don’t, I just must be really lucky.
  • Recent Achievements

    • Apprentice
      Adrian Williams went up a rank
      Apprentice
    • Reacting Well
      BashOrgRu earned a badge
      Reacting Well
    • Collaborator
      CHUNWEI earned a badge
      Collaborator
    • Apprentice
      Cole Multipass went up a rank
      Apprentice
    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
  • Popular Contributors

    1. 1
      +primortal
      519
    2. 2
      ATLien_0
      260
    3. 3
      +Edouard
      192
    4. 4
      +FloatingFatMan
      178
    5. 5
      snowy owl
      135
  • Tell a friend

    Love Neowin? Tell a friend!