can you remove the BRIGHT blue border around active windows?


Recommended Posts

@Bawx Sorry I cant show you a screen shot now as I just removed the blue lines :)

@Lenin91 Thanks for the fix its working perfectly! :)

To be perfectly honest I was hoping not to do any patching, but its done now so thanks again!

Right click on the desktop and click on Personalize. Click on Windows Color and Appearance, then click on "Open classic appearance properties for more color options".

In the Appearance Settings window, click on Advanced.

Hit the dropdown for Border Padding, and you can take it all the way down to zreo, which will give you bare minimum border. After you have it set, hit OK and/or Apply when necessary to close out back to your desktop.

I noticed it immediately and I can see both sides of this discussion - but I say: why do you even care? Really, is it worth complaining about? Here are some more serious problems:

- NVIDIA = crappy Vista drivers,

- Creative = crappy drivers for everything,

- WPF/.NET3 applications take too long to initialise,

- Stupid JAVA causes problems with Aero,

- Microsoft's Vista advertising campaign has been so far pretty poor, and the public are confused about it,

- The press are making unfairly attacking Vista (mainly because journos use Macs),

- Apple couldn't make iTunes work with Vista in the 6+ months they had (or they are doing it on purpose),

- The first batch of Vista PC's we recieved from OEMs (HP, Acer, etc) took a half hour each to setup, and some of the Acer machines had bad activation and needed to be activated by customers,

OK... So the blue line does match Vista's blue glow behind buttons and etc, which means it does fit-in graphically - but it doesn't really need to be there. If anything, it probably clutters the window frames more than it improves them. But as I said, it's not the most pressing issue with Vista... or the world.

I noticed it immediately and I can see both sides of this discussion - but I say: why do you even care? Really, is it worth complaining about? Here are some more serious problems:

- NVIDIA = crappy Vista drivers,

- Creative = crappy drivers for everything,

- WPF/.NET3 applications take too long to initialise,

- Stupid JAVA causes problems with Aero,

- Microsoft's Vista advertising campaign has been so far pretty poor, and the public are confused about it,

- The press are making unfairly attacking Vista (mainly because journos use Macs),

- Apple couldn't make iTunes work with Vista in the 6+ months they had (or they are doing it on purpose),

- The first batch of Vista PC's we recieved from OEMs (HP, Acer, etc) took a half hour each to setup, and some of the Acer machines had bad activation and needed to be activated by customers,

OK... So the blue line does match Vista's blue glow behind buttons and etc, which means it does fit-in graphically - but it doesn't really need to be there. If anything, it probably clutters the window frames more than it improves them. But as I said, it's not the most pressing issue with Vista... or the world.

your right, but starting yet another thread about how there is no sli support or crappy drivers for this or that, this thread actually prompted a fix.

Right click on the desktop and click on Personalize. Click on Windows Color and Appearance, then click on "Open classic appearance properties for more color options".

In the Appearance Settings window, click on Advanced.

Hit the dropdown for Border Padding, and you can take it all the way down to zreo, which will give you bare minimum border. After you have it set, hit OK and/or Apply when necessary to close out back to your desktop.

Hey it worked! Even if it's set to 1 you can still see it if you look close enough. On 0 it's barely noticeable.

Right click on the desktop and click on Personalize. Click on Windows Color and Appearance, then click on "Open classic appearance properties for more color options".

In the Appearance Settings window, click on Advanced.

Hit the dropdown for Border Padding, and you can take it all the way down to zreo, which will give you bare minimum border. After you have it set, hit OK and/or Apply when necessary to close out back to your desktop.

Thanks! Much better!

  • 2 weeks later...
  • 1 year later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Here is how I fixed Windows 11 not booting after clean installation by Taras Buria Story time. A couple of weeks ago, I experienced a very odd thing with my computers. I was trying to reinstall Windows 11 on my primary device, and everything was going smoothly until the installer performed the first restart. After that, my computer entered the boot disk selection screen instead of continuing the setup process. Huh, that's odd, said I, and selected Windows Boot Manager only to see it fall back into the same screen right away. Then I tried booting from the USB drive with the same result—the PC kept returning to the boot device selection screen, and removing the drive would send my PC to UEFI, again, with no way to launch Windows 11. I fired up my spare laptop, which has been sitting unused for quite a while, to see if I am dealing with a defective USB drive. Nope, Windows 11 installed and started without issues. After trying another drive and checking all the possible settings in UEFI, I decided to try disabling Secure Boot. Lo and behold, Windows 11 started as it should have been in the first place, continued the setup process, and reached the initial setup screen. Victory! After I finished the setup and applied all updates, I re-enabled Secure Boot, and Windows 11 started without issues. Some time later, I tried reinstalling Windows 11 on my laptop only to experience similar issues, with UEFI claiming a Secure Boot violation. I checked whether the drive works on my main PC, and yes, it installed Windows 11 without errors. I scratched my head, went to UEFI, turned off Secure Boot, and installed Windows 11 without issues. After that, I enabled Secure Boot. Note: I used the official Media Creation Tool app for my USB drive. Also, UEFI was properly configured for Windows 11, including no Legacy Mode, a GPT-partitioned drive, and TPM and Secure Boot enabled. From my experience, if you are dealing with similar symptoms, I recommend two things: If you use old Windows 11 install media, create a new one with the latest Windows 11 release, especially if you know your PC already has the latest Secure Boot certificates. If you cannot create a new one, turn off Secure Boot, complete the installation, download all available updates, and then re-enable Secure Boot in UEFI. Note that you need to turn off Secure Boot after installing Windows 11. Otherwise, the installer won't run, claiming a hardware requirements mismatch. I believe the problem hides in Secure Boot certificates that expire this month. Microsoft is currently rolling out new certificates, and maybe a mismatch was causing these issues for both of my systems. I am out of my depth to make a definitive statement; this article is flagged as "Opinion," as I only share my experience and some tips on how to fix the problem. If some of you possess deeper knowledge and understanding of the situation, please share it in the comments. As for everyone else struggling with computers not booting after a clean install, the two steps above should get you out of the pickle.
    • I gave the tool a chance the other day to make a USB. An hour later it was stuck at 0% downloaded. I downloaded the official ISO, downloaded Rufus, and made the USB myself in 15 min.
    • <Moved to software discussion and support> I've got fond memories of Winamp. Changing the skins, the different visualisations etc. But now I just need a simple music player. MSN messenger would be another one, MSN Messenger Plus (I think?) offered so many different plugins. But again, it probably wouldn't work for me these days. And then there is miRC. i think it's still going these days, but lord i had fun with that back in the day. Now it's mostly stuff like Discord, WhatsApp group chats, Signal, Telegram... /me is showing his age...
    • ive always been fascinated by old software this is an old video player for windows from apple
  • Recent Achievements

    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      518
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      94
    5. 5
      Steven P.
      77
  • Tell a friend

    Love Neowin? Tell a friend!