Recommended Posts

I did the whole set the composition or whatever it is to 1 and compositionpolicy to 2. (im guessing that means set the value data to 1 & 2 with hexadecimal)

Then went to command using administrator privlages and typed 'net stop uxsms' and 'net start uxsms' seems like it worked. went in to personalize and looked for the glass things and nothing. 3d flip didnt work either.

Link to comment
https://www.neowin.net/forum/topic/535869-enabling-aero-not-working/
Share on other sites

  • 2 weeks later...

To enable aero, one should have a chipset set above Intel 915, like 945 or 965. 915 chipset supports only XPDM (XP based driver) and it does not support WDDM( Windows Vista based driver). According to Intel site, it's not coming up with a Vista based driver for 915, so you can't use aero with 915.

I am not sure if adding a new graphics card would do any better. I am yet to confirm that. If any one of you know, let me know.

do not forget the following also : even when you have a wdm capable graphics card, if your overall rating is less then 3.0, aero will not work (unless you do a registry hack, and put the changed values in readonly for the system).

so for an aero desktop you should have these things :

- minimum system rating = 3.0

- wdm capable graphics card & drivers

cheers

:bounce:

2. In the System window, click Windows Experience Index.

If you have a score of 2 or higher, you?re fine for browsing the Web, reading e-mail, and using Office apps. If you have a WEI lower than 3, you can?t run the translucent, 3d Aero interface. A base score of 4 or higher means you can run all the new Windows Vista features without slowing down, including recording and playing back HDTV. A base score of 5 is the fastest computer available at the time Windows Vista was released, but we?ll certainly see faster computers soon.

To improve your WEI, start by updating as many of your drivers as possible. The easiest way to do this is to run Windows Update by clicking Start, typing Update, and then clicking Windows Update. Then, click Check for updates, and install any available hardware updates.

source : http://www.vistaclues.com/windows-experience-index-wei/

so you explain to me how you are running aero effects with no reg hack at a rating of 1.0????

I am a computer tech and I have built over 200 computers so I am going to say this once.

YOU DO NOT NEED a RATING above 3.0 to run the translucent effects of Aero. It ran just find on a system that got 2.4 up at work a few days ago. However I did have to go in to the appearance settings and set it. And I am just running a lowly 9600 on my laptop here and Aero works great on it.

My fx5500 is rated a 2.0 but I hope I can still get Aero and a much higher score on my 7600GT using nvidia's drivers. Does it actually affect aero to use nvidia's drivers and WEI as well?

I'm using a 7600GT with the latest nvidia drivers and it's working perfectly.

  • 9 months later...

If for some reason, you are unable to enable or run or start Aero feature in Vista, here are some troubleshooting steps you can try :

First, ensure that your version of Vista has Aero. Home Premium, Business & Ultimate have Aero.

Also ensure that your Graphic card supports WDDM (Windows Display Driver Model)

Next, right-clicking on the desktop, select Personalize.

Click on Themes and select the default Windows Vista themes.

Next, in Windows Color & Appearance, ensure that Enable Transparency is checked.

Now, inspite of this, you still find that Aero does not work, or your Aero has stopped working, simply copy-paste the following command in Vista Start Menus Search Box, and hit Enter.

rundll32.exe Dwmapi.dll,DwmEnableComposition

This will re-enable Aero by flushing it. From VISTA TROUBLESHOOTING TIPS.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      508
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!