Motorola Q comes to GSM carriers


Recommended Posts

Motorola's popular Q smartphone that debuted last May on Verizon's CDMA network has finally received a GSM counterpart, which will enable the device to be sold by U.S. carriers AT&T and T-Mobile, as well as in Europe.

The phone will come in two SIM card-supporting models: the MOTO Q q9 and MOTO Q gsm. The q9 can be considered a successor to the original Q, sporting a slightly thicker form factor based on Motorola's SCPL platform and running Windows Mobile 6.

It will feature HSDPA 3G connectivity, a micro-SD memory card slot and 256MB of built-in memory. A new screen automatically adjusts based on available light in order to reduce battery usage. USB 2.0 support additionally means fast transfers to the device.

Full article : Betanews

Link to comment
https://www.neowin.net/forum/topic/538314-motorola-q-comes-to-gsm-carriers/
Share on other sites

3G is also voice, much clearer voice.

Did you read the article? The phone uses a quad band GSM radio for voice.

For data connectivity the phone also uses GPRS/EDGE and HSDPA data.

HSDPA stands for High-Speed Downlink Packet Access. Now I may not have all of this right so if anyone wants to correct me or expand upon my post please do so. HSDPA is an update to UTMS, which most commonly uses W-CDMA. HSDPA creates a new channel in the W-CDMA spectrum thus allowing for theoretical download speeds of around 7Mbits a second. I believe that HSDPA is the most common 3G standard in the world

This is a 3G phone. I personally have never heard of any cellphone or any network that uses any 3G technology for voice. Perhaps maybe in some Asian countries where voice usage is high, but I doubt it because a well laid out CDMA or GSM network should be perfectly capable.

HSDPA is built into the GSM standard, so in short you would find that if Motorola was to remove the GSM radio from this phone it wouldn't function for either data or voice.

Maybe someone else can explain this better then me.

According to the Motorola site (I just skimmed it for 20 seconds using the pages linked to from the link above), the Q9 has 3G but only for data, which is weired as normally when there is a 3G radio they also use it for voice. The Q GSM which looks much nicer then the Q9 is GSM only.

3G is UMTS. UMTS is the next generation in the upgrade path for GSM carriers. It does voice AND data. The voice is much clearer and supports way more people on the same amount of spectrum. The data speeds are much faster then GPRS or EDGE. There is a software upgrade for UMTS called HSDPA which increases the downlink speed (like how EDGE was for GSM, it upgraded GPRS to a faster speed, yet it remained 2G). There is another software upgrade called HSUPA which increases uplink, but not very many phones or carriers have put that in yet.

HSDPA is built into the GSM standard, so in short you would find that if Motorola was to remove the GSM radio from this phone it wouldn't function for either data or voice.

HSDPA requires UMTS. It has both 2G and 3G radios, but it seems it is using the 3G radio ONLY for data.

According to the Motorola site (I just skimmed it for 20 seconds using the pages linked to from the link above), the Q9 has 3G but only for data, which is weired as normally when there is a 3G radio they also use it for voice. The Q GSM which looks much nicer then the Q9 is GSM only.

3G is UMTS. UMTS is the next generation in the upgrade path for GSM carriers. It does voice AND data. The voice is much clearer and supports way more people on the same amount of spectrum. The data speeds are much faster then GPRS or EDGE. There is a software upgrade for UMTS called HSDPA which increases the downlink speed (like how EDGE was for GSM, it upgraded GPRS to a faster speed, yet it remained 2G). There is another software upgrade called HSUPA which increases uplink, but not very many phones or carriers have put that in yet.

HSDPA requires UMTS. It has both 2G and 3G radios, but it seems it is using the 3G radio ONLY for data.

UMTS uses W-CDMA as its interface (how the spectrum is allocated). The HSDPA and HSUPA protocols make a new channel in the spectrum to use for downlinking and uplinking.

I have been doing some additional reading and I think I jumped the gun on you about the whole 3G for data only; please accept my apologies.

I am still foggy on this but I believe that the 2G radio is only used for telephony when there is not any UTMS coverage or at least that is the theory behind phones sporting 3G and 2G radios. However I have read around of a few people claiming that their carrier will not let them access UTMS while on a telephone call, so perhaps the inclusion of both radios is a work around for some carriers until they implement HSUPA??

I used to be really into to this stuff but living in Idaho kinda puts a damper on my interest because my carrier will probably be one of the last ones in the world to upgrade to 3G. Sometimes its best not to know about these things..........I can get a little envious of Europe and the big cities in the U.S.

I actually just bought my first bluetooth headset :blush: , Motorola HT820, to go with my HTC Herald that is supposed to come tomorrow.

UMTS uses W-CDMA as its interface (how the spectrum is allocated). The HSDPA and HSUPA protocols make a new channel in the spectrum to use for downlinking and uplinking.

I have been doing some additional reading and I think I jumped the gun on you about the whole 3G for data only; please accept my apologies.

I am still foggy on this but I believe that the 2G radio is only used for telephony when there is not any UTMS coverage or at least that is the theory behind phones sporting 3G and 2G radios. However I have read around of a few people claiming that their carrier will not let them access UTMS while on a telephone call, so perhaps the inclusion of both radios is a work around for some carriers until they implement HSUPA??

I used to be really into to this stuff but living in Idaho kinda puts a damper on my interest because my carrier will probably be one of the last ones in the world to upgrade to 3G. Sometimes its best not to know about these things..........I can get a little envious of Europe and the big cities in the U.S.

I actually just bought my first bluetooth headset :blush: , Motorola HT820, to go with my HTC Herald that is supposed to come tomorrow.

I have never bought a bluetooth headset!

With 3G, you can use both voice and data at the same time, but not with 2G. I do not know if this combination of 2 and 3G lets you, but there is no reason to not let you use voice on 3G. I do not know. All I know, is if I want a 3G Q styled phone, I would get the BlackJack.

I currently have a Cingular 8125 (HTC Wizard) and am sticking to that until Cingular 3G is up in Minneapolis/St.Paul area. I really like the new Toshiba G900, but it will probably cost an arm and a leg.

The HTC Herald is pretty cool, but it seems kind of outdated as with my Wizard. They have pretty much identicle specifications, other then the Herald is much thinner. I wouldn't buy a 2G phone anymore, even if 3G isn't expected for a while...

I have never bought a bluetooth headset!

With 3G, you can use both voice and data at the same time, but not with 2G. I do not know if this combination of 2 and 3G lets you, but there is no reason to not let you use voice on 3G. I do not know. All I know, is if I want a 3G Q styled phone, I would get the BlackJack.

I currently have a Cingular 8125 (HTC Wizard) and am sticking to that until Cingular 3G is up in Minneapolis/St.Paul area. I really like the new Toshiba G900, but it will probably cost an arm and a leg.

The HTC Herald is pretty cool, but it seems kind of outdated as with my Wizard. They have pretty much identicle specifications, other then the Herald is much thinner. I wouldn't buy a 2G phone anymore, even if 3G isn't expected for a while...

I just got home from work and opened up the box. I was amazed by how small the device is, its almost too small!

I know its CPU is pretty weak but so far it seems snappy. I pretty much will only use it for productivity reasons so it doesn't need to be a record setter for my needs. I have put some songs on it and so far it seems fine. Gonna pair my HT820's now and see what happens.

  • 4 weeks later...
Nothing has been said. Have you taken a look at the BlackJack or T-Mobile DASH? They have the same form factors. The BlackJack is pretty much the same as the Q but the DASH has no 3G but has WiFi.

IMO t-mobile has terrible coverage. The blackjack is ok but I am not crazy about the button layout. Also the BJ has wm5 while the new Q will have wm6 as the os.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      225
    3. 3
      PsYcHoKiLLa
      148
    4. 4
      Steven P.
      74
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!