[X360] Wireless Gaming Receiver Issues


Recommended Posts

Ok, so I waited about 6 months for MS to make the Xbox 360 wireless gaming receiver only to bring it home and have nightmares.

1st. when I opened the package and started cutting along the top (away from the product) someone thought it would be a good idea to snake the wire in a loop going vertical (top of package).

Back to the store to buy another after done cursing the sky!

Ok now this product has a issue that 50% of the people that buy it are having, after installation the you press the SYNC button on the PC Receiver and the controller, they find each other but fail to lock and take connection. This is even posted on the xbox forum with same issues.

My problem is the worst on this motherboard Asus A8N-SLI when i plug it into the USB Vista 64 finds it fine and says the correct name but ask for drivers.

As soon as you feed it the drivers it make my Logitech G7 stop working!!! it only does this when the driver is initialized though.

If i leave both plugged the computer starts my USB keyboard works but mouse dosent, unplug the receiver and the mouse still doesn't work. The only way it works if i start the computer without the 360 receiver. But sure enough if i plug it back in it kills the G7.

So i figure i would try the same in XP ... same issues

i have used the newest Xbox 360 wireless receiver drivers 1.1 and the issue still arises. This has been tested on other computers and its fine but its kills my mouse

Pro's:

Use 360 products on PC (If they sync and connect)

19.99

Con's

Finds each other but dosent connect

Kills Logitech G7

Packaging is OK but who ever snaked the wire needs to be hit with rocks

I have not been able to use this product once ! Im sure that will fix with updates but i seem to be the only one with a problem of getting my G7 frozen. Its like the drivers smash into each other.

Please help with this G7 issue as i think its a G7 and reciever issue and not the motherboard as my USB devices are still working just the G7 gets knocked out

Link to comment
https://www.neowin.net/forum/topic/538920-x360-wireless-gaming-receiver-issues/
Share on other sites

ok if i start my computer with out the 360 wireless receiver plugged in its fine and if I plug it in after desktop showing they both work...

if its plugged in before that mouse initialization the mouse is kicked off and a replug in and out will not fix it

OK i have now bought new computer peices and built me a new Vista machine and somehow its the same problem

Built a Duo Core system with Striker extreme

Again, in Vista 32 or 64 & XP 32 or 64 if you have the mouse plugged in (Logitech G7) and the Xbox wireless gaming receiver before windows boot the driver for the wireless gaming receiver will initialize and the Logitech G7 is knocked out and will not function even after a unplug and re plug. but the mouse on my Dinovo Edge keyboard works so its not a mouse issue the wireless gaming reciever knocks out the logitech g7 for no reason...

BUT yet again if i boot and after desktop i plug in the wireless gaming receiver they both will work fine and play together

can someone with the Xbox 360 wireless gaming receiver and logitech G7 please confirm this

  • 4 weeks later...
  • 2 weeks later...
anyone find any answers to this problem? and does it happen if your mouse is connected with ps/2 not usb? cause i use my ps/2 for my mouse and i have windows xp and im thinkin of getting it.

thanks

still not yet

this USB device knocks out all USB devices you have plugged in

some worse then others

Cant get mine to work unless i unplug both my G15 and Razer copperhead then boot windows. If I plug it in after windows boots the Copperhead stops functioning and the receiver won't sync. if i plug in the keyboard or mouse after the controllers are in sync after a windows boot the controllers will fall out of sync and I will get flashing 4 quardants on my 360 controller. What a waste of money. I got it so I could use my racing wheel in windows, but I guess not :(.

im trying to use the wireless headset with it and the audio lags really bad in skype, anyone seen a fix for that or am i doing something wrong. It connects to it fine and it appears in the sound devices and stuff, just kinda laggy.

  • 1 month later...

still no fix, its been 3-4 months and not 1 person i know uses this thing with no problems what so ever...

what a ****ing joke!!!!

xbox support has no clue

its found to be a power issue and can not be on the hub w/ any other device

oh isnt that nice, unplug eveyrthing to get it to work

still no fix, its been 3-4 months and not 1 person i know uses this thing with no problems what so ever...

what a ****ing joke!!!!

xbox support has no clue

its found to be a power issue and can not be on the hub w/ any other device

oh isnt that nice, unplug eveyrthing to get it to work

or use an externally powered hub. that seemed to solve all my issues in the past with usb devices not functioning at the same time. (most boards seem to be underpowered for multiple usb devices.)

or use an externally powered hub. that seemed to solve all my issues in the past with usb devices not functioning at the same time. (most boards seem to be underpowered for multiple usb devices.)

yea i know this a temp work around but this will happen with just a mouse and this device

if anything is plugged in while this is on it will do this...

a mouse or a keyboard, this really blows

  • 3 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
    • OpenAI is making Codex more useful in Chrome and the cloud by Pradeep Viswanathan OpenAI's Codex now has more than 5 million users, up nearly 4x from earlier this year. To further accelerate Codex's growth among developers, OpenAI today announced that it has agreed to acquire Ona, a company that builds secure cloud execution and orchestration technology for developers. Ona will enable developers to run Codex with persistent and controlled cloud infrastructure for long-running agentic workflows. Right now, most Codex execution happens locally on developers' laptops and PCs, and the agents work continuously for hours. Through Ona, OpenAI aims to make Codex agents keep working for days without being tied to a user’s local machine or an active session. This will be an important capability for enterprises that want to deploy AI agents in production while maintaining control over infrastructure, data, security boundaries, credential scope, logging, and review workflows. Like any acquisition, the deal is still subject to customary closing conditions, including regulatory approvals. Until the deal closes, OpenAI and Ona will continue to operate as separate companies. After closing, Ona’s team will join the Codex team to improve developer workflows. Alongside the Ona acquisition announcement, OpenAI today introduced a few Codex updates. Developers can now save Codex rate limit resets and use them later instead of losing them when they are not needed immediately. OpenAI is also adding a referral option where users can invite a friend to Codex and get a saved rate limit reset. OpenAI today also announced a developer mode for browser use in Chrome and the Codex in-app browser. With this mode, Codex can use the Chrome DevTools Protocol to debug web apps, inspect pages, and work more directly with browser-based development workflows. Developers can use this when they want Codex to profile JavaScript, inspect console output and network traffic, examine web page states including the DOM and applied styles, and more.
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      186
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!