[X360] Wireless Gaming Receiver Issues


Recommended Posts

Ok, so I waited about 6 months for MS to make the Xbox 360 wireless gaming receiver only to bring it home and have nightmares.

1st. when I opened the package and started cutting along the top (away from the product) someone thought it would be a good idea to snake the wire in a loop going vertical (top of package).

Back to the store to buy another after done cursing the sky!

Ok now this product has a issue that 50% of the people that buy it are having, after installation the you press the SYNC button on the PC Receiver and the controller, they find each other but fail to lock and take connection. This is even posted on the xbox forum with same issues.

My problem is the worst on this motherboard Asus A8N-SLI when i plug it into the USB Vista 64 finds it fine and says the correct name but ask for drivers.

As soon as you feed it the drivers it make my Logitech G7 stop working!!! it only does this when the driver is initialized though.

If i leave both plugged the computer starts my USB keyboard works but mouse dosent, unplug the receiver and the mouse still doesn't work. The only way it works if i start the computer without the 360 receiver. But sure enough if i plug it back in it kills the G7.

So i figure i would try the same in XP ... same issues

i have used the newest Xbox 360 wireless receiver drivers 1.1 and the issue still arises. This has been tested on other computers and its fine but its kills my mouse

Pro's:

Use 360 products on PC (If they sync and connect)

19.99

Con's

Finds each other but dosent connect

Kills Logitech G7

Packaging is OK but who ever snaked the wire needs to be hit with rocks

I have not been able to use this product once ! Im sure that will fix with updates but i seem to be the only one with a problem of getting my G7 frozen. Its like the drivers smash into each other.

Please help with this G7 issue as i think its a G7 and reciever issue and not the motherboard as my USB devices are still working just the G7 gets knocked out

Link to comment
https://www.neowin.net/forum/topic/538920-x360-wireless-gaming-receiver-issues/
Share on other sites

ok if i start my computer with out the 360 wireless receiver plugged in its fine and if I plug it in after desktop showing they both work...

if its plugged in before that mouse initialization the mouse is kicked off and a replug in and out will not fix it

OK i have now bought new computer peices and built me a new Vista machine and somehow its the same problem

Built a Duo Core system with Striker extreme

Again, in Vista 32 or 64 & XP 32 or 64 if you have the mouse plugged in (Logitech G7) and the Xbox wireless gaming receiver before windows boot the driver for the wireless gaming receiver will initialize and the Logitech G7 is knocked out and will not function even after a unplug and re plug. but the mouse on my Dinovo Edge keyboard works so its not a mouse issue the wireless gaming reciever knocks out the logitech g7 for no reason...

BUT yet again if i boot and after desktop i plug in the wireless gaming receiver they both will work fine and play together

can someone with the Xbox 360 wireless gaming receiver and logitech G7 please confirm this

  • 4 weeks later...
  • 2 weeks later...
anyone find any answers to this problem? and does it happen if your mouse is connected with ps/2 not usb? cause i use my ps/2 for my mouse and i have windows xp and im thinkin of getting it.

thanks

still not yet

this USB device knocks out all USB devices you have plugged in

some worse then others

Cant get mine to work unless i unplug both my G15 and Razer copperhead then boot windows. If I plug it in after windows boots the Copperhead stops functioning and the receiver won't sync. if i plug in the keyboard or mouse after the controllers are in sync after a windows boot the controllers will fall out of sync and I will get flashing 4 quardants on my 360 controller. What a waste of money. I got it so I could use my racing wheel in windows, but I guess not :(.

im trying to use the wireless headset with it and the audio lags really bad in skype, anyone seen a fix for that or am i doing something wrong. It connects to it fine and it appears in the sound devices and stuff, just kinda laggy.

  • 1 month later...

still no fix, its been 3-4 months and not 1 person i know uses this thing with no problems what so ever...

what a ****ing joke!!!!

xbox support has no clue

its found to be a power issue and can not be on the hub w/ any other device

oh isnt that nice, unplug eveyrthing to get it to work

still no fix, its been 3-4 months and not 1 person i know uses this thing with no problems what so ever...

what a ****ing joke!!!!

xbox support has no clue

its found to be a power issue and can not be on the hub w/ any other device

oh isnt that nice, unplug eveyrthing to get it to work

or use an externally powered hub. that seemed to solve all my issues in the past with usb devices not functioning at the same time. (most boards seem to be underpowered for multiple usb devices.)

or use an externally powered hub. that seemed to solve all my issues in the past with usb devices not functioning at the same time. (most boards seem to be underpowered for multiple usb devices.)

yea i know this a temp work around but this will happen with just a mouse and this device

if anything is plugged in while this is on it will do this...

a mouse or a keyboard, this really blows

  • 3 months later...
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
    • Was it too much to ask to show the icon in this article?
    • Frankly, I blame whoever is writing such articles. "A big improvement/update and/or new feature is now available to everyone! Also, use this unofficial tweak tool to enable it because it actually isn't available to you yet officially and might not in fact even be entirely ready or whatever, hence why it is perhaps not enabled for you*. But it's great and you should enable it!" I mean there's nothing wrong with sharing info about some feature you might need to enable via unofficial means, of course. It's just that these articles tend to essentially end up being two news pieces in one, and one of them tends to be a bit misleading. (*Yes, yes, the "it's a controlled rollout!" thing. Not a fan of that one either. The argument, not the actual rollout.)
    • Thank you. Will do. I read in the release notes that editor config might be at play here.
    • Actually, I think even Microsoft doesn't know how to control it
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      185
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!