Vista crashes with Catalyst 7.2 (Radeon 7200)


Recommended Posts

I am having big-time problems with the catalyst drivers for Vista Ultimate!!!

My specs AMD 3200, Radeon 1600 - dual opererating system with XP and Vista.

I got the microsft drivers for the radeon from MS Update but I can't increase the resolution above 1024x768 with no 3D, no overlay or anything else. When I tried to install the new Catalyst 7.2 drivers - Vista crashed and I had to do a system restore :-(

In XP everything works fine - but VISTA nothing!!!!

Anybody got an idea what is going on there???

Any suggestion please!!!!!!!!!!!!!!!!!!!!!!!!!!

Indeed, Windows Vista may have had extensive beta testing but now that it is in the wild there are plenty of driver problems cropping up which will take time to sort.

Don't use the Catalyst 7.2 drivers. For now, anyway.

I can't tell what ATI drivers I am on as Windows reports the file versions as either 8.332.0.0, 7.1 or 6.14 (!), but I can't use hibernate as the ATI drivers are preventing the desktop from restoring, according to the crash reports. The machine comes back on as normal but remains at a blank screen, following which both monitors switch to standby. I have to power off and on again and start windows normally. Hopefully this little bug will be fixed in revised drivers.

Abit IL9pro

Core 2 Duo E6600

2Gb DDR2 RAM 667mhz

Gainward Radeon x1650 Pro

I haven't upgraded yet but the 7.1 drivers ran fine with Vista and my X800XL - the only problem is that sometimes the CCC is slow to close down and an info screen pops up for a second on shutdown.

Try reinstalling the drivers from scratch. Although I'm having small problems too in which my screen fills with vertical lines and system crashes instantly. I reinstalled them last night hoping to solve it. :)

I got the microsft drivers for the radeon from MS Update but I can't increase the resolution above 1024x768 with no 3D, no overlay or anything else. When I tried to install the

I had same problem with an X1900GT, but then realised that it was limited to 1024x768 only when I had my TV out plugged in and set to 'clone mode' in control center.

To get round the problem, I disable TV Out when I don't need it, and put up with 1024x768 when watching movies from my PC to my TV (which doesn't make any diff).

So, do u have tv out enabled? if so, check there, if not, then i'm not sure what to do, sorry.

Ditto for cgatlan...

I was expermenting with those present modes in Vista Ultimate when I updated the drivers. :p

Make sure that tv out is not enabled and then you should get your true resolution etc back.

As for Vista Ultimate crashing, did you happen to have Dreamscene Preview running? That's what crashed my Ultimate install on the driver upgrade. I recreated it several times trying to figure out what was going on. :D

Also, try the offical 7.2 drivers. Microsoft Drivers can sometimes be a little off for your system.

I'm still having the crashes and I don't have Dreamscene installed.

This is sad. :(

I'm still having the crashes and I don't have Dreamscene installed.

This is sad. :(

Hi edgar_wilhelm

Try this

http://www.rage3d.com/board/showthread.php?t=33881837

disabling the ATI hotkey poller in service:

Go to Control Panel\Administrative Tools

select service:

Now disable Ati External Event Utility

Reboot

Thank you all for your quick replies !!!

I got it to work and this it how it worked:

I saw a link in this forum for VISTA drivers (sorry don't hive a link right now because I am at work ;-). Went to the site and downloaded the calatyst drivers 7.1 there. It was a massive download (more than 100 MB but what the heck with nowadays broadband connections it just takes a couple of minutes) and I installed it alright. However I was not able to change the sreen resolution above 1024x768. When playing aroud with the expert version of Catalyst I changed about everything :-(

Of course I had the feature "clone desktop to tv" turned on because these are also my settings for XP. I was even able to increase the resolution of my tv to 1280*1024 while the monitor setting still remained at 1024*768. So obviously that was not what I wanted! ..... After trying everything else I finally found the solution that you suggested!

All I had to do was to disable the tv (no dual view) and I was able to increase the resolution!

So - YES your remark about "disabling TV-Out" did the trick! With only the monitor running - I could finally increase the resolution!

However, (and this is a big however!) I don't quite understand why this is the solution - especially when it is working without that problem for XP!

When trying to install other programs in Vista - I came across other things as well that all in all makes me start to believe what others have said before is really triue: that Vista is not ready yet. I am sure it will eventually all disappear (just like with XP) but for the time being Vista causes more problems than it solves. So far I have not yet come to see any advantage besides the new look and feel. Because I was afraid something like this might happen - I decided to go for a dual boot system with XP still being my main operating system.

As a matter of fact working all weekend with Vista made me even reconsider if I should not try Ubuntu (linux) to see what is going on there (knowing that there will be other problems like Games that are not working etc).

So thank you all for your help and support! I hope that someday I can help others like you helped me!

Cheers

I'm having the exact same problems with the new catalyst 7.2 with a ATI Radeon X800GTO2, I had to boot into safe mode and unistall the drivers and catalyst suite due to a black screen while loading, Also I find it quite odd when using 7.1 and run the performance rating programme my PC restarts??

So I'm using the ones shipped with Vista Ultimate and waiting on a perfect set of ATI drivers and catalyst suite :yes:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • After I installed KB5095093, the volume on my ARM laptop won't go above 20%. It's stuck on the hearing protection level, which is pretty much useless if you want to listen to anything. I rolled back.
    • Amazon Prime Day slashes Samsung's newest Galaxy Watch Ultra by 45 percent by Karthik Mudaliar Samsung’s flagship Android smartwatch has received one of its steepest Prime Day cuts. Amazon has dropped the 2025 Samsung Galaxy Watch Ultra in Titanium Blue to $357.24, saving buyers around $292 from its $649.99 list price. That's a 45 percent discount (purchase link below). The 47mm Galaxy Watch Ultra uses a titanium casing and a 1.5-inch Super AMOLED display with a resolution of 480 x 480 and peak brightness of 3,000 nits. It includes LTE connectivity, Bluetooth 5.3, Wi-Fi, NFC, and dual-frequency L1+L5 GPS for more accurate outdoor route tracking. The 2025 model has 64GB of storage, a 590mAh battery, sapphire crystal glass, 10ATM water resistance, IP68 protection, and MIL-STD-810H durability testing. Its health and fitness tools include heart rate monitoring, sleep coaching, Energy Score, Running Coach, body composition analysis, temperature sensing, and ECG support, where available. This model is best suited to Android users who regularly run, hike, cycle, or train outdoors and want cellular access without carrying a phone. The larger battery, rugged construction, bright display, and dedicated Quick Button also make it a stronger option than Samsung’s regular Galaxy Watch models for extended workouts and demanding environments. Grab the Titanium Blue Galaxy Watch Ultra before the Prime Day price resets: Samsung Galaxy Watch Ultra (2025) [Sold and Shipped by Amazon] Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Google begins rolling out its post-Epic Play Store billing model next week by Karthik Mudaliar Google has confirmed that its redesigned Play Store billing and fee structure will take effect on June 30, 2026, in the United States, the United Kingdom, and the European Economic Area. The changes will let eligible developers offer their own payment systems or send users to an external website for purchases, while separating Google’s platform service fee from the cost of using Google Play Billing. The rollout puts concrete dates and detailed rate cards behind the broader Android policy overhaul Google announced in March. That announcement followed a proposed settlement with Epic Games intended to resolve their long-running disputes over app distribution and payments, although the U.S. portion of the agreement still requires court approval. Under the new billing choice program, developers selling digital content or services can display an alternative payment option alongside Google Play Billing. They may also direct users to their own websites to complete a purchase. Developers can use Google’s standard payment-choice screen or design one that complies with the company’s user-interface rules. Choosing another payment processor does not eliminate Google’s cut altogether. The company will continue charging a service fee for transactions associated with apps distributed through Google Play, regardless of whether payment is handled by Google, an alternative provider, or a developer’s website. Google argues that this fee covers the value and infrastructure provided by Android and the Play Store. For developers earning up to $1 million annually, the service fee will generally be 10 percent. That rate also applies to auto-renewing subscriptions. When Google Play Billing is used in the U.S., U.K., or EEA, Google will add a separate 5 percent billing fee, and developers processing payments elsewhere will not pay that additional charge. This means Google’s familiar flat 30 percent commission is disappearing, but developers will not necessarily see a dramatic reduction on every transaction. An in-app purchase from an existing user processed through Google Play Billing can still reach a combined 30 percent. The biggest savings are likely to come from subscriptions, smaller developers covered by the $1 million tier, and companies able to move customers to their own payment infrastructure. Google is also offering lower rates through its Apps Experience and revamped Games Level Up programs. Apps and games that satisfy the company’s requirements can qualify for 15 percent service fees on new-install transactions and 20 percent on existing-install transactions. The criteria include performance and reliability standards, support for additional Android device categories, and selected platform features. Those program rates are scheduled to become available in the initial markets and Australia on September 30. For consumers, the immediate effect will depend on whether developers adopt alternative payments and pass any savings on through lower prices. For developers, however, June 30 begins a more flexible but considerably more complicated Play Store economy in which distribution, billing, install dates, revenue thresholds, and program participation can each affect Google’s final cut. Google is also separately developing a Registered App Stores program designed to simplify the installation of qualifying third-party stores. That initiative is expected to arrive with a major Android release later in 2026 and will launch outside the U.S. first. Google says the rest of the world will receive the changes by September 30, 2027, although billing rates for markets outside the US, UK, and EEA have not yet been announced.
    • 38% off a super insane price is still an INSANE price.
  • Recent Achievements

    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
    • One Year In
      Tom Schmidt earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      464
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      81
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!