Recommended Posts

Well what happend is that I roll back few moths my PC. Had bad virus, couldn't get rid of it and that was the last chance. After that I had to install few programs that I've lost but was alright. Not big deal.

Everything is working good now, but my eyes are realy sour now. It allmost hurts. The letters everywhere are very sharp and annoying.

I tryed to fix that with Clear Type and Standart but it didn't work that great. The problem still exists. The resolution is good. I have HP vs17 monitor that is TFT. Put new drivers there.

Well here comes the key point. I tryed to put some ATI drivers. I have ATI xPress 200 series Video on board.

I download drivers form the ATI web site, but after I install them the PC started to restart it slef everytime it has loaded the main window. That happend maybe 15 times. One after another permanetly. Then I had to put the "Last know good configurationn" and I unintall the Catalist.

The Device Manager shows that everything is fine. No question marks.

If someone can help me with this it will be just great.

At this time it's killing my eyes. Wasn't like that befor.

Any sugestions will be helpfull. I'm not much in to PCs.

Thank you again.

If you have any question, I'll try to be helpfull answering.

P.S. Sorry for my English but I'm from Bulgaria.

Thanks

Link to comment
https://www.neowin.net/forum/topic/553443-sharp-letters-in-windows/
Share on other sites

Did you check if the monitor itself has a sharpness adjustment? If the monitor doesn't have its own controls, you may have to install the monitor's software. LCD monitors must always be used at their native/maximum resolution (in your case that may be 1280 x 1024). If the monitor's driver is installed then check that the refresh rate is set to the maximum availabe (usually between 60 and 75 Hz). Also try changing the DPI under Display Properties/Settings/Advanced/General tab. If you install drivers and the system keeps rebooting, it means there may be a hardware or driver conflict.

Monitor is working on 1280x1024 75 Hz.

I put the last version of it's drivers. Downloaded them form HP site.

It doesn't have sharpness adjustment and I never did smth like that befor. Had check all the options of it, but theres nothing special.

DPI i on 96 and think that's normal. Always been like that.

About drivers on the video card, it's still mistery for me.

Should I put screenshot? But I think it will look just perfect on ot.

If the problem is with the monitor, then a screen capture will not show others what you see. I can't think of anything else to suggest right now except trying the "ClearType Tuner PowerToy" from Microsoft:

http://www.microsoft.com/windowsxp/downloa...ppowertoys.mspx

HP recommends using 60 Hz refresh, try if that changes anything.

Edited by Gus Valentine

60 Hz is even worst.

I've alway been on 75 witch is MAX.

It's interesting. It wasn't like that without any kind of other progams. Nothing. Now it's just crazy. It's killing me.

I'll need glasses in few weeks.

I gues I'll have to bring it somewere so they'll fix it.

You're right. Screenshot will not help at all, couse you see it fine. The problem is in me, not in you.

If it all started with a virus then I can speculate that the virus must have damaged the font files.

Font files are executable programs in Windows so they can be infected by virus. The anti-virus must have removed some of the required font files.

Try reinstalling the fonts from the Windows CD.

Note: Font file with .fon extension can be infected.

The files with .ttf extension are not executables so it cannot be infected.

Edited by Express

+Telemachus, I'm using LCD as I said befor. Everything was just great befor, my monitor is fine and I don't think buying a new one will help me.

Express, there was a Virus, yes. I think it was Zlob. Couldnt start non of the EXE files on the computer. Nothing.

I thought about that problem that you said. Maybe it dammeged some fonts or smth and I put a lot of new fonts. Many many of them. Same crap.

The letters are actualy kinda small and sharp. Can I chage them from somewere? Make them bigger, ot change the font at all?

I don't have Windows CD. I have HP computer and it has 10 GB. on the HDD that are locked and when somth goes wrong I'm using them as recovery console.

Even when I'm writing now, here, it this threat it's very bad. The letters are very thin. They just don't look normal.

Thank you much.

  twyst3d said:
since you are on a lcd/tft it should be default to 60htz it shouldnt go higher or lower because flat panels do not have a refresh rate like CRTs do, and this can cause problems

Is that correct? I thought if you used a DVI cable (digital) the refresh rate was N/A, but if you used a standard VGA cable (analogue) then your refresh rate becomes an issue?

ostavime. Post a screenshot anyway...

Yes, I did that. I tryed.

Clear type is not the problem. I'm using Standart now, but if I turn on the Clear Type is even worst. The picture becomes not clear. I can make another picture so you'll see, but it's not that. I'm 100% sure. It's smth else. But atleast now you can see the difference and you can understant what I'm talking about.

Hmm, the text looks normal here... :huh:

I mean, normal for being non-ClearType... Maybe you were used to another font before that was a bit more fat, and that setting was lost when you had to roll back your computer. You can change the font under the Advanced tab in the Display Properties in the Control Panel. That's all I can think of right now really, because at least to me those screenshots looks normal for some Arial-like typeface.

Edit: Yes, from the first picture, it really does look like ClearType was on before because I can see some antialiasing. If you enable ClearType, you can later fine tune it by following the steps here:

http://www.microsoft.com/typography/cleart...uner/Step1.aspx

  Jugalator said:
Hmm, the text looks normal here... :huh:

I mean, normal for being non-ClearType... Maybe you were used to another font before that was a bit more fat, and that setting was lost when you had to roll back your computer. You can change the font under the Advanced tab in the Display Properties in the Control Panel. That's all I can think of right now really, because at least to me those screenshots looks normal for some Arial-like typeface.

Edit: Yes, from the first picture, it really does look like ClearType was on before because I can see some antialiasing. If you enable ClearType, you can later fine tune it by following the steps here:

http://www.microsoft.com/typography/cleart...uner/Step1.aspx

I can change some of the letters from the advanced options, but not all of them. For example I can not change the lettrs that I'm using to write right now. I can change the menu lettrs, but that doesn't help me.

I'll try to install what they gave me befor and I'll write to say what's going on.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I want to like ^^ this ^^ twice 😛
    • No, it doesn't, but I'm sure you don't just mean compile when you say compile.
    • Wine is a translation layer, not an emulator. And there are many cases where performance is worse or BETTER under Proton, it really depends on the game in question.
    • ImgDrive 2.2.3 by Razvan Serea ImgDrive is a CD/DVD/BD emulator - a tool that allows you to mount optical disc images by simply clicking on them in Windows Explorer. If you have downloaded an ISO image and want to use it without burning it to a blank disc, ImgDrive is the easiest way to do it. ImgDrive features: One-click mounting of iso, cue, nrg, mds/mdf, ccd, isz images Runs on 32-bit and 64-bit Windows versions Mount ape, flac, m4a, wav, wavpack, tta file as AUDIO CD (16-bit/44.1kHz) Mount a folder as DVD/BD Mount images in command line Does not require rebooting after installation Support up to 7 virtual drives at the same time Support multi session disc image (ccd/mds/nrg) A special portable version is available Translated to more than 10 languages ImgDrive is freeware, you may use it at no cost Support File Type: .ccd - CloneCD image files .cue - Cue sheets files of ape/flac/m4a/tta/wav/wv/bin .iso - Standard ISO image files .isz - Compressed ISO image files .nrg - Nero image files .mds - Media descriptor image files ImgDrive 2.2.3 changelog: Some minor changes and improvements Download: ImgDrive 2.2.3 | 701 KB (Freeware, paid upgrade available) Download: ImgDrive Portable 547 KB View: ImgDrive Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      VAT Services in UAE earned a badge
      One Month Later
    • First Post
      LsDmT earned a badge
      First Post
    • One Month Later
      evershinefacilityservice earned a badge
      One Month Later
    • Week One Done
      evershinefacilityservice earned a badge
      Week One Done
    • One Month Later
      POR2GAL4EVER earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      571
    2. 2
      ATLien_0
      253
    3. 3
      +Edouard
      162
    4. 4
      +FloatingFatMan
      151
    5. 5
      Michael Scrip
      110
  • Tell a friend

    Love Neowin? Tell a friend!