• 0

Dreamweaver CS3 install problems in Vista


Question

I am trying to install the new Drewamweaver CS3, but I have been having problems. I am running Vista Business and had Dreamweaver 8 and Photoshop CS2 installed, but are gone now for the new software. When I go to install Dreamweaver CS3 and Photoshop CS3 it will installed the shared component on each of them, but nothing else. When I try to install it on a XP machine it installs fine. Any ideas what the problem is?

Recommended Posts

  • 0

I would love to keep up with the times. Anyone know how to install Dreamweaver CS3 on Vista Ultimate? I wrote an earlier post that was more specific. I haven't called Adobe yet today to get a refund, but it looks like I am going to have to. I did however install Dreamweaver CS3 onto my laptop running XP Pro successfully, but I did not activate it. I just installed it on there to see if it would work. I allready uninstalled it from the laptop because I do not want it on there. So there must be an issue with Vista Ultimate. And like I said in my previous post I installed Photoshop CS3 a while back with apsolutly no problems and it runs great. I also have no trials and no betas installed ever. Thanks for your help.

-Jim

  • 0

XP-RTM,

Thanks for getting back to me. Yeah Adobe had me try that script quite a few times, it didn't work. I did run the utility in administrator mode by the way. I also put all the files in a folder on the desktop and ran the setup in administrator mode. There is one thing that is showing up in my Vista Event Viewer:

Product: Adobe Extension Manager CS3 -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information. HRESULT: 0x800736B3. assembly interface: IAssemblyCacheItem, function: Commit, component: {9BAE13A2-E7AF-D6C3-A01F-C8B3B9A1E18E}

Any idea what that means? I know what the Extension Manager is, but don't know what this error means. Thanks again!

-Jim

  • 0

Been a few days since anyone has replied to this thread - have you all solved your installation problems? If you have, please tell me how!

I have the same problem as described by casperboy777 above:

Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.MFCLOC,version="8.0.50727.163",type="win32",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"'. Please refer to Help and Support for more information.

I'm installing CS3 Design Premium onto my Vista Ultimate x64 machine, with all options except Version Cue Server, and at the end, it says that DreamWeaver and Shared Components have failed, although it also has Shared Components in the list of successful installs. The above error is the only one listed in the logfile though.

I have tried with UAC on (I usually have it off), I have tried the installation without selecting to install DreamWeaver, and between each uninstall and attempt to install, I use Adobe's CS3 Clean script at level 4. But each time it fails in the same way, and none of the supposed successfully installed programs work anyway, which I presume is due to the Shared Components failing.

Has anyone solved this yet?

  • 0
Without sounding like i'm complaining, Vista has some real issues. I run Vista Ultimate on my home machine and i'm unable to install Acrobat 8. Acrobat 7 installs without a hitch.

I install Dreamweaver CS3 on my Mac today, so far I love it. I would recommend you contact Adobe and bark up their tree. Maybe they have an installer update.

Acrobat 8 installed fine here, as part of CS3 Web Pre.

The last couple computers that I've worked on with Vista, I had trouble installing Acrobat Reader 8. I ended up having to copy the temp file before clicking off the error message that comes up saying that it can't access the temp directory, then manually running the msi in that folder.

Reader 8 is known to have problems, yes.

I installed CS3 Web Premium (gotta keep up with the times ;) ) without a hitch...

Same here.

  • 0

Chrisminett,

Nope I still haven't had any luck. I got a refund on the product. But I will tell you everything I went through that didn't work. Adobe had me create a new administrator account on my Windows Vista and then install from that account - It didn't work. Adobe recommended I do a "Selective Startup" - didn't work. I e-mailed Microsoft and they tried their best to help me. Microsoft had me do a more elaborate boot called "Clean Boot Mode" - that didn't work. I followed someone's advice in Adobe forums to modify the ContainerProxy.js file - it didn't work. I ran the CS3Clean script many many times. I uninstalled every single Adobe product on my computer and still no luck. I think the problem is when the Dreamweaver CS3 installer goes to install Extension Manager. So I went to Adobe and Downloaded the latest Extension Manager 1.8 from Adobe which has the same looking installer and sure enough it fails. To make a long story short when I bought Adobe Photoshop CS3 that installed flawlessly no problems. Adobe has always made excellent programs, then again they should be for the cost. I don't know what happened but I think Adobe made a frankenstein creation with their installer. Installing the program should be the easiest part. I will buy Dreamweaver again someday when Adobe fixes their installer problems. I don't know why they can't just take Dreamweaver CS3 right now and use a different installer. I don't need to see a fancy matching installer, you only see it when installing, upgrading and uninstalling. Dreamweaver version 8 installs flawlessly on my Vista. Unbelievable, but hey I can't complain I got my money back.

-Jim

  • 0

Thanks for your reply casperboy77, sad to hear that you couldn't get it to work.

I was really hoping that UAC would hold the key to solving this - although you'd think that there wouldn't be any difference between having UAC on, and running setup with elevated privileges, or having UAC turned off, and running setup from a full administrator account. However, reading in this post about the effects of UAC, reminded me of a problem I had when I first upgraded to Vista in January, installing a money/accounting program called Quicken. Although not officially supporting Vista, others in the forums were able to install and use it, but it wouldn't even install for me, giving the same error about Microsoft.VC80..... But turning UAC on and running the setup with elevated privileges solved it.

I suppose I just have to wait until Adobe deems Vista important enough to actually bother about getting the installer to work correctly!?

  • 0

It sucks that the Master Collection edition doesn't come out in about a month :(

I have problems also installing CS3. I'll problably try installing as a real administrator ( https://www.neowin.net/forum/index.php?showtopic=537806 ) and see if it will install.

  • 0

My Problem has been solved here is how my issue was fixed. What sucks is that I got a refund for Dreamweaver CS3. So I used my friends copy to try this one fix and it worked. It all went good though, I just bought it again and got a new serial and activated it without any problems. Just to recap to everyone what my problems was:

When installing Adobe Dreamweaver It would say installation failed and showed that Shared Components installed then it also said that it failed with a red X and Dreamweaver CS3 Failed with a red X.

I had never installed an Adobe betas ever. I tried the CS3Clean utility, I tried creating a new administrator account then installing it didn't work. I tried starting in Selective boot mode didn't work. I tried everything on the next one included an elaborate procedure to alter ContainerProxy.js that didn't work. You name it I tried it, I tried everything that Adobe had me do and also tried everything Microsoft had me try.... still nothing. Well here was the solution that worked for me:

1. Open an Administrator command prompt by right clicking on Start -> All

Programs -> Accessories -> Command Prompt and selecting "Run as

Administrator" and clicking "Allow" for the elevation prompt

2. In the command prompt, type the command below

fsutil resource setautoreset true C:\

(This assumes that C: is the drive in which Vista is installed. If it is

installed on another drive like D:, please change the drive letter

appropriately)

3. Reboot the machine

The above is also the solution that fixes the error 8007000b when ever you try to install updates in Windows Update. This worked for me, I hope it helps others out there with similar problems.

-Jim

  • 0

Jim,

I just wanted to say thank you, I've recently been down the same road with Adobe, although in my case I was stupid enough to purchase the software from a company called UKtechstore (I live in Buckinghamshire, England). The company sounded like they were UK based but it was after paying by credit card on their web site that I was informed that the card transaction would appear in Canadian dollars.

When I had problems installing Dreamweaver, Adobe UK said they couldn't help because the product was sourced in North America. I did speak to support in the US, not that the 800 number is any good from the UK. I tried all the things you did, they must know that they don't have the answer. I was ready to bin it and get a UK version.

Thanks to you I have saved a lot of money, if you're ever near Hazlemere, Bucks (35 miles west of London) I owe you several beers.

Thanks

Best Regards

Graham

Edited by Graham Jones
  • 0

I got installed on Vista Enterprise edition by the compatibility mode option. However now when i run it I get this screen and I am just doing this as trial software. I have the previous versions still installed is that the problem? Any one else run into this problem?

post-121385-1178906530_thumb.jpg

  • 0

This is really starting to get aggrevating now - I just cannot get it to install!

Thanks for the info casperboy77, unfortunately, unlike the others, it didn't work for me. In fact, I had already used that fix back when I first installed Vista in January, due to the Windows Update problem. I tred it again anyway, just for good measure, but without any success.

In fact, if the problems with installing Adobe CS3 weren't enough, Vista's taken the great twist of having Explorer crash upon login, so that I have no desktop, start menu, etc., and have to run everything manually through TaskMan. Oh joy! But I suppose, it does at least give me something new to focus on!?

  • 0

I have a installed in Dreamweaver CS3 trial and installed con Vista, later installed Firework CS3 trial and everything was fine, but i get the Creative Web Premium CS3, so i uninstalled both Dreamweaver and Fireworks CS3 and try to install Web Premium when the installation was finish nothing get installed!!! only Adobe Bridge get installed the others component don't, i try several times, with different kind of solution, but every time is the same; someone know what's happening??? :unsure:

  • 0

I think a javascript problem is the cause in a lot of these cases. I would never have known if I hadnt went nosing

around in the Common Files/Adobe folder and stumbled across a log file names "Adobe Dreamweaver CS3 9.0.log.gz"

and noticed the install was halting with a javascript error. I googled the error and got the solution. I take no credit for this fix, though being quite a N00B in the department of diagnosing software and not being one for looking through log files I was quite

chuffed with myself for getting to the root cause. Anyway enough patting myself on the back, if not for others the info

would have been useless.

I tried almost all of the suggestions here to get the dreamweaver cs3 trial installed and nothing worked.

I am using vista 32 Ultimate but the vista 64 solution is a little different, both solutions are here, or potential solutions,

and really easy to implement. It will take longer to read my waffle than actually do the fix, so its worth trying,

especially if your install just starts a progress bar that promptly disappears.

Id try it if any installer of any software is failing. This fix is for almost every type of installer in VISTA.

For VISTA32 users>>>>>

Get command prompt up. It has to be run with admin rights so save yourself some time and run it this way.........Start/programs/accessories/.....right click command prompt and click run as administrator.

Then paste these commands in 1 after the other

regsvr32 vbscript.dll (THEN PRESS ENTER)

and

regsvr32 jscript.dll (AGAIN PRESS ENTER)

You should get a succesful response each time.

If youve recently tried installing the software it might still be running in the background (or more like hanging in the background), possibly more than one instance, you have to close any of these installers down in the task manager.

Open task manager and look at processes from all users, find msiexec.exe, its described as "windows installer" and close

all instances of this process.

Now go to your extracted program and run the setup file for your program (Im assuming your initial file unzipped or extracted

the files to a directory first), mine extracted to D:\Adobe CS3\Dreamweaver (D: is my primary drive, yours is probably C:).

I opted to right click my "setup.exe" file that was in the Dreamweaver folder and run as admin (just in case of admin errors) and the installer worked like a charm, no reboot required nothing. It was a doddle. IT WAS FIXED!!!!!!!!!!!!!!!!!!!!!

For VISTA64 users>>>>>After right clicking and running command prompt as admin, change the directory in the command prompt to Windows\SysWow64. Do this by typing "cd C:\Windows\SysWow64" in the command prompt window (dont type the quotes) and hit enter (Change the C: for whatever letter holds the Windows folder, your system drive!).....then type the

regsvr32 vbscript.dll (PRESS ENTER)

and

regsvr32 jscript.dll (PRESS ENTER)

Then follow the remaining instructions as vista32, which is basically to make sure the windows installer isnt running and run the set up file for the software as admin. BINGO...........I hope

Hope this helps. Ive heard it worked for lots of people. IT DID FOR ME.

I registered to post this specific fix that worked for me after seeing so many helpful people trying to help everyone sort there problem out, so I hope this helps even 1 person.

  • 0

Hi:

I was unable to install photoshop cs3 on an older machine whose chip set was Intel 915. I did read someplace that you had to have at least a 945 chipset for photoshop cs3 to install. Don't ask me why, but that is what I found out. I was able to install Photoshop cs3 on an Intel 945 motherboard and also on a 975 motherboard. I don't know what the equivalent chipset for not Intel motherboards will not work.

  • 0

Finally got it installed!! :)

I have done a clean install of my Vista Ultimate x64, and then installed Adobe CS3 Design Premium as the very first thing (after ensuring all drivers were loaded OK),and with UAC still turned on.

Having installed to a clean copy of Vista, I have no idea what the difference might have been between this and my previous failed attempts. Perhaps not having any previous Adobe CS installed beforehand? Perhaps having not turned UAC off at all? Maybe some other conflicting installed software? No idea. Only thing - if all else fails, clean install Vista, and you might just get lucky!

Good luck!

  • 0

here is the fix. It is for Photoshop CS3 etended, but also fixes Dreamweaver CS3. The only difference is that on the line it says to replace you won't find the "d", just ignore that and replace it anyway/ Also it is near but not exactly on line 1102 in notepad search as it says below. Oh, and "F" Adobe for making this complication necessary. Sheesh. Good luck:

Originally Posted by [email protected]

Background:

It took me a few hours to roughly figure out what happens on my

system and till now I'm still not absolutely sure why the error appears, but

certainly Javascript, IE and the Adobe installer are involved.

To be more specific: The installer quits with an exception

when javascript tries to open "window.external.ANYMETHOD".

Since the problem is NOT SOLVED and only BYPASSED in the follwing steps you might

want to wait for a better solution from Adobe itself (RECOMMENDED),

but with this way I got all products installed and removed again.

0. This workaround is only tested on Windows XP SP2 with Adobe CS3 Design Premium.

To fully complete the next steps be sure you have some experience in handling a

text editor and the Windows Explorer.

1. Start the Setup as usual and let it copy over a few files

and than - after a short popup - let him disappear. There shouldn't be

any other errors except the described above, otherwise you have to deal

with these first (eg. run the cleanup script, if the setup complains

about an allready running installation etc).

2. Now open up your Windows Explorer and go to

[C]:\[Program Files]\[Common Files]\Adobe\Installers\c14ac4070fd9614ffe63f4bb533db2c\ resources\common\scripts

( "[]" Depending on your installation and language).

Alternatively you can press [WinKey]+R and type in:

"%CommonProgramFiles%\Adobe\Installers\c14ac4070fd 9614ffe63f4bb533db2c\resources\common\scripts"

3. Locate a file called "ContainerProxy.js" in the opened Window and

open it with a text editor of your choice (notepad will be adequate).

Right click on the file -> Open with -> Notepad.

4. Go to line 1102 or simply search for

"jsonObj = _jsonToObject(window.external.SetSessionInitialize d(initValue));"

and replace this line with

"jsonObj = _jsonToObject(SetSessionInitialized(initValue));"

5. Save the file by pressing [strg]+S or use the menu:

Menu -> File Save.

6. Startup up the installation process again and this time the

installer shouldn't quit and hopefully you will be able to install.

You can simply undo any changes by removing the Adobes "Installers" folder

[C]:\[Program Files]\[Common Files]\Adobe\Installers

and run the Setup again or replace the line in Step 4 with

the original one.

"jsonObj = _jsonToObject(window.external.SetSessionInitialize d(initValue));"

  • 0

Please help.

Heres the background.

I bought Adobe Dreamweaver CS3 after using the trail, In August 07. The trial worked great, hence why I bought it.

I ran the disk and installed and what popped up?

post-242594-1196541777_thumb.jpg

It freaked me out. So I called Adobe and a tech support walked me through it to delete two files and run it.

It worked!! (cannot remember files)

Great right? NO when I did an adobe update it would not work again. So I called and this time they direct me to all of these tech notes.

I did everything

1. I ran clean script on level 1,2,3, and 4.

2. I deleted every Google application on my PC

3. I deleted flash player from my PC

4. I turned regsvr32 vbscript.dll on and off 100 times

5. I turned regsvr32 jscript.dll on and off 100 times

6. I have spent 183 Min on the phone with Adobe Tech Suppot

7. I have spent 93 Min on the phone with Gateway Tech Support

8. I have spent $163.95, 3 hours with Microsoft Tech Support

9. I have Restored my system and lost 34 clients pushing me back to August, 07

10. I have now been FIRED for not being able to meet a deadline for a $15,000 Job

11. I have also downloaded the trail of PS and DW cs3 and they will not install same error.

Basically in a nutshell I wanna kill myself.

I have run everything in Admin mode.

I am outraged with Adobe and Microsoft.

My system specs are here: http://support.gateway.com/s/PC/R/1009452/1009452sp2.shtml

I now have 265 GB Left after deleting everything

From the adobe log I recived this error:

"Size: 517

Error 1311.Source file not found: C:\Users\Michael\Documents\Downloaded Installations\Adobe Dreamweaver CS3\payloads\AdobeALMAnchorServiceAll\AdobeALMAnchorServiceAll1.cab. Verify that the file exists and that you can access it.

Action ended 15:22:50:"

and have no clue as what this is.

One last thing.. I cant find my disk for clean install of vista!!!

PLEASE HELP ME!!!!

  • 0

Alot of people are having these issues, and the only way it seems to for-sure install anything CS3 is to do it on a clean install. I've had multiple issues installing photoshop CS3, and the only way to get it right is to do a clean install....it sucks, but maybe adobe will come out with a better installer next time around for CS4.

  • 0
"Size: 517

Error 1311.Source file not found: C:\Users\Michael\Documents\Downloaded Installations\Adobe Dreamweaver CS3\payloads\AdobeALMAnchorServiceAll\AdobeALMAnchorServiceAll1.cab. Verify that the file exists and that you can access it.

Action ended 15:22:50:"

Highly likely thats a media issue.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • In the way that you framed it incorrectly. You wrote: "The constant need to close all browser sessions and wait for a new version to install" There's no "constant need to close all browser sessions". That's factually incorrect. The browser downloads its updates in the background and installs them when you open it again. Silently. And there's no "wait for a new version to install", updates are small and take 2-3 extra seconds AT MOST, if any. If you have an SSD, there's zero extra time. Also, every mainstream browser operates this way. Firefox, the FOSS go-to browser, the default on almost every Linux distro, does exactly the same. Also, you don't need to constantly restart Edge for updates to install, you can completely ignore them and it doesn't even ask you to handle them, it's all silent and automatic. So I don't understand what else do you want.
    • DuRoBo Krono Review: Portable E-Ink reader with great ideas that need a bit of improvement by Taras Buria Phone-sized e-readers are gaining traction these days, with more people treating them as a getaway device to cure phone addiction (or at least they are trying to) or having a more pocket-friendly reader that is easier to carry and hold. The market now has plenty of such readers to choose from, and DuRoBo is the latest addition, a new player that offers a more interesting approach to the idea. The Krono is a $279 e-reader with an interesting twist, which tries to make the device more fun and ergonomic. Here is my review. Disclaimer: DuRoBo provided the review sample without any editorial input or pre-approval. The Krono comes in a phone-sized box with pink accents. Inside, you get the device itself, a short user manual, and a USB cable. The cable is a bit old-fashioned, Type-A to Type-C, which is a bit disappointing. Hot take: I would rather have no cable in the box rather than another Type-A cable that gets immediately thrown into my box full of similar cables I never use. The Krono also has no charger in the box, as it relies on accessories you already own, which is fine with me. Here are the specs: Dimensions 154 x 80 x 9.0 mm or 6.06" x 3.15" x 0.35" 173 g or 6.10 oz Materials Black or White plastic Display 6.13-inch E-Ink Carta 1200, 1,648 x 824 pixels, 300 ppi Touch-capacitive. Dual-tone frontlight. Processor 8-core Qualcomm Snapdragon 690 (QTI SM6350) 2 performance cores at 2.07 GHz 4 efficiency cores at 1.71 GHz Memory 6 GB Storage 128GB, non-expandable ~104GB available out-of-the-box Operating system Android 15 with a custom launcher Connectivity Wi-Fi and Bluetooth Battery 3,950 mAh battery Buttons and port USB Type-C port Power button, Volume button, Smart Dial Breathing Lights Audio Mono Speaker and Dual microphones In the box The Krono, a Type-A to Type-C cable, user manual Price $279 on Amazon First impressions Right off the bat, no, this is not a phone replacement. Do not approach this device thinking it can serve you as a dumb phone to cure your TikTok addiction. In addition to the fact that the Krono has no cellular connectivity, I strongly believe that no amount of extra devices can fix your phone addiction until you put some serious effort into it. The Krono is a phone-sized e-reader, a companion for your phone dedicated to reading without distractions. The DuRoBo Krono is made of plastic with a very fine texture. It is hardly premium, but I also cannot say it feels cheap. The device is also a bit thick, quite dense, and well-built without rattling or cracking. You get to choose between two colors: white and black. The front has quite thick bezels, which is hardly surprising for an e-ink device. These things use front light, with LEDs usually placed on the screen perimeter. While I do not mind thicker bezels, the notably larger chin cheapens the look a little. What I mind is a notable seam between the display and the main case, which, after just two days of use, collected plenty of dust and specks. The back of the Krono is what makes the device stand out. There is a cylinder (DuRoBo calls it the Axis) embedded in the back of the reader, housing three elements: a power button on the right edge, a Smart Dial on the left edge, and "Breathing Lights" on the back. An etched DuRoBo logo sits below the cylinder, and it is the only piece of branding you can find on the device. Overall, the design and materials are very unassuming, but the cylinder with additional control elements certainly elevates the look and makes it more interesting. Other physical elements include two microphones (one on the top edge and one on the bottom edge), a USB Type-C port, a volume rocker, and a single mono speaker. There is no fingerprint reader, so if you want to protect your device, a PIN is your only option. The official TPU case is not the most premium-looking Display The Krono has a 6.1-inch E-Ink Carta 1200 touchscreen display with a resolution of 1,648 x 824 pixels (300 ppi). The display is front-lit, and you can adjust the brightness and temperature from cool to warm. Unfortunately, the Krono lacks automatic brightness and temperature adjustments, and you cannot set a custom schedule for the frontlight. However, you can set it to always enable frontlight so that you can see what is happening on the screen when turning it on in a dark environment. On the bright side (get it?), the front light can get extremely dim so that the screen is barely readable in a pitch-dark room. The front light is also uniform across the screen, with no noticeable temperature gradients. I am very susceptible to uneven front light, and it is very easy for me to notice it, but the Krono is doing a very good job in this area. I also like that the edge shadow is not very prominent and barely visible in the black variant. E-Ink Carta 1200 is not the newest generation (there are Carta 1250 and 1300), but it is still a good display. It supports three modes: Clarity, Speed, and Quality. In Clarity mode, text is very sharp and easy to read, but you trade that for more ghosting, a slower refresh rate, and more artifacts when the display changes images. Speed mode, as the name suggests, boosts refresh rate and reduces ghosting, but fine print and text become more jagged. Finally, Quality mode is only available in Android apps. It has the lowest refresh rate, but in return, you get much better visuals, improved gradients, and more. Like brightness and temperature, you can toggle modes from the control center. It is available when swiping from the top-right corner of the screen (the top-left is for notifications). I also like that the Krono can work as a desk clock when not in use. It has a bunch of screensavers, including horizontal clocks with time, date, and current battery level. The screen refreshes once per minute, and battery drain is extremely low (not even 1% in 24 hours). It is a great use of the technology, and another thing I wish more e-ink devices featured. Smart Dial The Smart Dial is Krono's main party trick. It sits on the left side of the device and serves multiple purposes. You can twist or press it to perform various actions, depending on the current use case scenario. When reading books, twisting the dial flips through pages, and pressing it refreshes the screen. On the home screen, the dial adjusts the brightness, and holding the dial pressed launches voice note recording. Finally, a quick double press launches the DuRoBo AI chatbot. While the dial scroll is not notched, it is very smooth and has haptic feedback that confirms your actions, which feels very nice. As a long-term Apple Watch user, I love the idea behind the dial. It feels very natural and oddly satisfying to use, especially with that subtle haptic feedback. I never liked flipping pages with touch input, and I strongly believe each e-reader should come with some sort of physical controls for turning pages. The Krono has both volume buttons (which also work as page turners) and the dial, so you are free to use whichever you prefer. With that said, the dial is not perfect. For one, it sticks out of the case way too far for my liking, raising concerns about durability and longevity when carrying the Krono around in a pocket (it is a pocket-sized device after all). Also, it has too much wobble, which cheapens the experience and makes it feel a bit flimsy and unsecured. While there are two plastic guards on the Krono's case, they are way too small for any kind of protection. I also think DuRoBo should let users customize dial actions (the only available customization is scroll direction), particularly for long and double presses. Not everyone needs voice notes, and DuRoBo AI does not work without an active internet connection, leaving the long press essentially useless when offline. I do not mind these features, and I genuinely think they are useful, but I would rather have the ability to toggle between screen modes, turn the frontlight on/off, or launch my favorite app. I also agree with people on Reddit asking developers to let users adjust the dial sensitivity. I hope this is something DuRoBo can implement with a software update to make the experience more personalized (it is a Smart Dial, after all) and incentivize users to fiddle with the Dial more often. The Dial is a fantastic idea, so please, guys, improve it a little. As for ergonomics, they are mostly fine, but the dial's position may feel a little awkward and way too high. When I use a phone or a phone-sized gadget, I tend to rest one of its corners on my palm for a more secure grip. With the Krono, such a grip is impossible because you cannot reach the dial even with big hands. You have to lower the reader a bit and hold it like a bottle without any extra support for the bottom edge. Such a grip is not necessarily uncomfortable (the Krono is also light enough for it), but it requires a bit of muscle retraining. Sometimes, I do not bother with the dial and hold the Krono like my phone, flipping through pages with volume buttons, as they are perfectly positioned for my right-hand thumb. Interestingly, when testing the Krono, I would often find myself thinking that a roller embedded in the long plastic cylinder on the back of the device would have been a much more comfortable solution. There is a free idea for you, guys. Software The Krono runs Android 15 with a very minimal launcher on top. The home screen presents you with a list of apps, a scrollable list of widgets, and your user profile. Widgets can display time, calendar, or recent books for quick access. You can also add or remove apps from the home screen to keep the most useful stuff around without tapping "Apps." I like this minimalistic approach; it looks clean, easy to understand, and light. I understand that some may find the list of all apps way too clean, but fortunately, DuRoBo lets you switch to traditional icons. The reader also has a bunch of preinstalled apps: Read: The default app for reading. Browser: A Chromium-based browser. Files: A simple file manager. Music: A simple music player. Spark: A voice recorder with transcription support and AI summarization DuRoBo AI: A built-in AI chatbot. Transfer: An app for file transfer over Wi-Fi. If that is not enough, there is the Google Play Store, where you can download all the extra apps you need, alternative readers, podcast apps, chatbots, and more. DuRoBo is not trying to give you an all-in-one device. The standard software experience is quite minimal, which makes it easy to approach and learn. The standard reader supports EPUB, EPUB3, AZW3, MOBI, PDF, TXT, DOC, and DOCX, which is more than enough to let you read most books without third-party software. As for customizing the reading experience, you can select one of five built-in fonts, adjust size and thickness, adjust margins and spacing (only three variants for each), change text alignment and direction, toggle the reading status bar, and switch to dark mode. There is also text-to-speech, which utilizes Android's default TTS tech. While I like the simplistic approach, I cannot help but feel DuRoBo could have made the built-in reader a bit more customizable. However, I am not going to bog down on this, as you can always install any other reader you prefer using the Play Store or by sideloading an APK. Getting books to the Krono is very simple. Given that the device is an Android smartphone without cellular connectivity, you can transfer files via a USB Type-C cable, download them using the built-in browser, share them over Bluetooth, or use cloud storage. My favorite was the built-in Transfer app. It is simple, reliable, and very well-designed. I was surprised by how well-designed the web portal is. It is fast, pretty, and properly categorized. Well done! Once you have your books loaded, you can highlight or underline text, add annotations, bookmark pages, check the table of contents, and ask AI about the selected text. Unfortunately, the Krono has no built-in vocabulary, but again, that is something a third-party reader could fix. Overall, the built-in reader is light and snappy, with just the minimum amount of features for a regular user to enjoy reading books. The Krono has no built-in reading tracking, so stat nerds will have to look for third-party reading apps. However, you can set a daily reading goal, and the reader will notify you when you reach it (for example, one hour). You can also set a reminder to read at a certain time, and when the time comes, the Krono will light up its back LEDs and unlock itself to nudge you. Other than that, the rear LEDs do nothing, not even showing charging progress, which is an unfortunate misopportunity if you ask me. Quirks aside, Krono's Android runs quite snappily and bug-free. Early reviews of the Krono criticized its Android 13-based software quite a lot, but now, the reader runs Android 15, and its software has fixed plenty of initial complaints. I never experienced any issues with built-in apps. AI attempts The DuRoBo Krono comes with a built-in AI chatbot. There is no information on what model powers this thing, but the system says it was "trained by Google." You can launch the bot from the app list or by double-pressing the dial. It works just like any other chatbot, and you can ask it anything by typing or using voice input. The AI saves your chats, and you can rename, export, or delete them. DuRoBo AI requires an active internet connection, and it does not work offline. Its reach and capabilities are also limited. You can only chat in the app and use it in the reader app as a makeshift vocabulary. However, the implementation is kinda awkward. You can only send a selected portion of text to AI without giving it any requests or instructions. I highlighted the word "dumb," and it apologized to me for not being useful. You also cannot ask follow-up questions or send the generated response to a separate chat. The chatbot is also slow, even with fast Wi-Fi, making the overall experience quite frustrating, which makes me again wish for the ability to remap the double press to something else. Spark, the standard voice recording app, also uses AI for note summarization and transcribing. Neither feature works offline, unfortunately. Spark records notes up to 30 minutes using Krono's dual microphones, and you can rename or export notes. Transcription quality is decent, and the speed is alright, but you can find much better solutions in the Google Play Store. What I like about Spark is that transcribed notes are not locked, and you can always type more to elaborate on your ideas, which is handy. Overall, I like that the Krono is not shoving AI down my throat, but to be honest, there is really not that much to shove. AI features here feel raw and need improvements to be more useful. Battery Life Like most E-Ink readers, the Krono has fantastic battery life. Even with a clock as a screensaver, its standby power consumption is incredibly low. And when in use, you can get weeks of reading on a single charge. Without the front light, my unit never sipped more than one or two percent of battery during a one-hour reading session. It was nice to see plenty of battery-related settings. You can limit charging at 80% to protect battery health long-term, check the number of charging cycles, manufacturing/first-time use date, battery health, and the maximum capacity. Additionally, the Krono lets you select what hardware remains enabled when sleeping. This lets you keep Wi-Fi and Bluetooth on (say, if you want to receive notifications, for some reason) and keep audio playing when locked. Turning these features off effectively eliminates any standby battery drain. I left my Krono sitting for 24 hours with a clock screensaver on, and it did not drop a single percent. The pretty big 3,950 mAh battery justifies the device's thickness and ensures you do not have to charge it for long periods. Speaking of charging, it is capped at only 10W, which is a bit disappointing, as getting such a big battery to 100% takes a notably long time in the era of super-fast charging smartphones. DuRoBo Moodi The Moodi is a standalone, optional accessory for your Krono. It is a wireless remote with two customizable buttons that you can use to flip pages, control media, or scroll webpages. The accessory connects via Bluetooth. Despite having a built-in rechargeable battery, it is extremely light. While the Moodi's shape and form factor is not what I would call particularly ergonomic, it is not uncomfortable to hold and use. The Moodi comes with six removable magnetic buttons with various smiley faces. Buttons sit securely, and they have nice-feeling, albeit a little loud, clicks. It is a cute touch that adds a little more fun and character to the device. There is also an accented power button and a single status LED. The latter displays charging status and connection mode. The Moodi supports three modes: Reading: Buttons work as volume buttons, allowing you to flip pages in the built-in reader or other apps that support page turning with volume buttons. Media: Buttons work as skip forward/backward, which is useful when listening to audiobooks, podcasts, or music. Scroll: The third mode lets you scroll pages in the web browser or any other application The Krono properly detects the Moodi and presents you with an on-screen guide when you connect it for the first time (it also displays the battery level). However, you can only change modes by holding both buttons for a few seconds. It is also worth noting that the Moodi works with other devices. I connected it to my iPhone and it let me adjust volume or control media playback. Sadly, the scroll did not work, so you cannot use it to waste time scrolling TikToks. Overall, the Moodi is a cute little accessory, which I can recommend for those who read a lot. It is very useful for remote page flipping when you do not want to burden your hands by holding the Krono all the time. I only wish DuRoBo included a lanyard for the built-in loop. As for the battery life, after using the Moodi for a few days, I only managed to drop several percent of its 90 mAh battery. Despite the small size, it is rated for weeks of use, which is pretty impressive. At $35.99, I cannot say the Moodi is a must-have accessory, but I see the appeal. I prefer using the Krono with its Smart Dial, as I rarely read for more than 40-60 minutes in one sitting. However, if you have a stand and like reading for long periods, the Moodi is the right thing to have. It is a bit more expensive than regular page flippers on Amazon, but it is on par with similar products from Kobo or BOOX. Plus, it has a little more fun to it with removable buttons and better integration into the Krono. Conclusion At the end of the day, DuRoBo Krono is a nice pocket-sized e-reader. Its software focuses on the main things without trying to be everything at once. The smart dial idea is unique and great, and I wish more manufacturers had something similar in their devices. The display is also good, with an even frontlight and "always-on" support. I did not notice any deal-breaking issues with the Krono. However, you can feel that the idea needs some improvements, such as a slightly stiffer dial in a more ergonomic location, perhaps a little more premium materials, and better software customization. I hope the company won't give up on the idea and improve the dial and ergonomics in the second generation. Buy DuRoBo Krono Black - $279.99 on Amazon Buy DuRoBo Krono White - $279.99 on Amazon Buy DuRoBo Moodi - $35.99 on Amazon As an Amazon Associate, we earn from qualifying purchases.
    • In what way is any of what I said incorrect? To install an update you need to close all browser instances, upping it from once a month to once a fortnight is an inconvenience for users. Particularly when updates don't offer functionality that users want (notably copilot). Security updates should come as they are needed, not on a release schedule
    • Dopamine 3.0.6 by Razvan Serea Dopamine is an awesome free audio player which tries to make organizing and listening to music as simple and pretty as possible. Dopamine has been designed for Windows 7, Windows 8.x and Windows 10 and plays mp3, ogg vorbis, flac, wma and m4a/aac music formats quite well. The best part? It's created by long-time Neowin member, Raphaël Godart. If you’re looking for a music player to handle a large music collection, you should definitely give Dopamine a try. Dopamine 3.0.6 changelog: Fixed Manually edited album covers are overwritten on the next collection refresh Fixed AppImage package not working on modern GNU/Linux distributions Deleting song from playlist sometimes fails Playback controls only work when clicking on upper half of the buttons It's unclear that files must be tagged with an external ReplayGain scanner (for example rsgain) before normalization can take effect. Change to Artist or Album tags is not reflected in the song list view nor in the Now Playing information ReplayGain issues Smart playlist filters ignore text containing accents or other special characters Some MP3 files trigger an "MPEG header not found" error due to a too-narrow initial MPEG header scan range Changed Updated the Vietnamese translation Download: Dopamine 3.0.6 | 122.0 MB (Open Source) Links: Home Page | Forum Discussion | Screenshot | Other OSes Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      agatameier earned a badge
      Week One Done
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
  • Popular Contributors

    1. 1
      +primortal
      516
    2. 2
      +Edouard
      193
    3. 3
      PsYcHoKiLLa
      147
    4. 4
      ATLien_0
      96
    5. 5
      Steven P.
      76
  • Tell a friend

    Love Neowin? Tell a friend!