Recommended Posts

Hey everyone!

I have an Edimax AR-7064G+A and while it is configured properly in order to have ports opened and stuff, every so often it disconnects, and reconnects within a minute but with a different external IP.

That is quite an annoyance for me.

I looked at the logs in the router and here is what it says:

4/24/2007 12:19:36> SNMP TRAP 2: link down

4/24/2007 12:19:36> MPOA Link Down

4/24/2007 12:19:36> mpoaChannDown: ch<0> null iface

4/24/2007 12:19:36> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 12:20:6> Last errorlog repeat 14 Times

4/24/2007 12:20:6> MPOA Link Up

4/24/2007 12:20:12> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 12:20:12> SNMP TRAP 3: link up

4/24/2007 12:20:12> Accept() fail

4/24/2007 12:20:12> Accept() fail

4/24/2007 12:23:42> SNMP TRAP 2: link down

4/24/2007 12:23:42> MPOA Link Down

4/24/2007 12:23:42> mpoaChannDown: ch<0> null iface

4/24/2007 12:23:42> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 12:24:13> Last errorlog repeat 40 Times

4/24/2007 12:24:13> MPOA Link Up

4/24/2007 12:24:57> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 12:24:57> MPOA Link Down

4/24/2007 12:24:57> mpoaChannDown: ch<0> null iface

4/24/2007 12:25:0> MPOA Link Up

4/24/2007 12:25:35> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 12:25:35> SNMP TRAP 3: link up

4/24/2007 12:25:35> Accept() fail

4/24/2007 12:25:35> Accept() fail

4/24/2007 12:43:32> SNMP TRAP 2: link down

4/24/2007 12:43:32> MPOA Link Down

4/24/2007 12:43:32> mpoaChannDown: ch<0> null iface

4/24/2007 12:43:32> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 12:44:2> Last errorlog repeat 31 Times

4/24/2007 12:44:2> MPOA Link Up

4/24/2007 12:44:11> MPOA Link Down

4/24/2007 12:44:11> mpoaChannDown: ch<0> null iface

4/24/2007 12:44:33> Call Failed

4/24/2007 12:44:34> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 12:45:0> Last errorlog repeat 17 Times

4/24/2007 12:45:0> MPOA Link Up

4/24/2007 12:45:1> MPOA Link Down

4/24/2007 12:45:1> mpoaChannDown: ch<0> null iface

4/24/2007 12:45:30> Call Failed

4/24/2007 12:45:31> MPOA Link Up

4/24/2007 12:45:35> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 12:45:35> SNMP TRAP 3: link up

4/24/2007 12:45:35> Accept() fail

4/24/2007 12:45:35> Accept() fail

4/24/2007 15:47:16> SNMP TRAP 2: link down

4/24/2007 15:47:16> MPOA Link Down

4/24/2007 15:47:16> mpoaChannDown: ch<0> null iface

4/24/2007 15:47:23> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 15:47:46> Last errorlog repeat 17 Times

4/24/2007 15:47:46> MPOA Link Up

4/24/2007 15:47:54> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 15:47:55> MPOA Link Down

4/24/2007 15:47:55> mpoaChannDown: ch<0> null iface

4/24/2007 15:47:55> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 15:48:36> Last errorlog repeat 16 Times

4/24/2007 15:48:36> MPOA Link Up

4/24/2007 15:48:37> MPOA Link Down

4/24/2007 15:48:37> mpoaChannDown: ch<0> null iface

4/24/2007 15:48:37> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 15:49:7> Last errorlog repeat 17 Times

4/24/2007 15:49:7> MPOA Link Up

4/24/2007 15:49:14> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 15:49:14> SNMP TRAP 3: link up

4/24/2007 15:49:14> Accept() fail

4/24/2007 15:49:14> Accept() fail

4/24/2007 16:12:21> SNMP TRAP 2: link down

4/24/2007 16:12:21> MPOA Link Down

4/24/2007 16:12:21> mpoaChannDown: ch<0> null iface

4/24/2007 16:12:21> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 16:13:19> Last errorlog repeat 30 Times

4/24/2007 16:13:19> MPOA Link Up

4/24/2007 16:14:3> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 16:14:3> SNMP TRAP 3: link up

4/24/2007 16:14:3> Accept() fail

4/24/2007 16:14:3> Accept() fail

Can anybody understand this and tell me for sure if it's due to my PC or router or ISP or anything?

Thanks in advance everybody!

David

Edited by Ritalin
Link to comment
https://www.neowin.net/forum/topic/555878-router-help-please/
Share on other sites

I realize that the external IP changing is totally normal, but it's doing it every hour or so... and it's getting quite annoying!

What im basically wondering is why it's kicking me off every hour or so, and i posted those logs from my router because im sure some people out here would be able to understand that gibberish lol.

Another one:

4/24/2007 18:45:21> SNMP TRAP 2: link down

4/24/2007 18:45:21> MPOA Link Down

4/24/2007 18:45:21> mpoaChannDown: ch<0> null iface

4/24/2007 18:45:23> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 18:45:51> Last errorlog repeat 55 Times

4/24/2007 18:45:51> MPOA Link Up

4/24/2007 18:47:1> MPOA Link Down

4/24/2007 18:47:1> mpoaChannDown: ch<0> null iface

4/24/2007 18:47:4> MPOA Link Up

4/24/2007 18:47:7> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 18:47:7> SNMP TRAP 3: link up

4/24/2007 18:47:7> Accept() fail

4/24/2007 18:47:7> Accept() fail

4/24/2007 18:49:6> SNMP TRAP 2: link down

4/24/2007 18:49:6> MPOA Link Down

4/24/2007 18:49:6> mpoaChannDown: ch<0> null iface

4/24/2007 18:49:8> netMakeChannDial: err=-3001 rn_p=8047d8a0

4/24/2007 18:49:36> Last errorlog repeat 59 Times

4/24/2007 18:49:36> MPOA Link Up

4/24/2007 18:49:41> ppp_ready: ch:804d6a28, iface:80414024

4/24/2007 18:49:41> SNMP TRAP 3: link up

4/24/2007 18:49:41> Accept() fail

4/24/2007 18:49:41> Accept() fail

and say what? hey my router, which you do not sell so dont offer support for, loses sync at random times and it's getting annoying. I don't know what's doing it. help?

Im trying to see if those logs can tell us anything before i act.

Um ask them why the IP Address that they provide and support is changeing so frequently. Ask them if the line that they supply and support is dropping, if they say it is then wow problem solved it is an ISP issue. If they say it isn't then it may be an issue with your router. Any drops in service your first call should be the ISP. :unsure:

The IP address changing isn't a bug, it's a feature. Whenever the router (re)connects to the ISP, you get a fresh IP. It's a good thing, imagine Rapidshare downloads without an hourly limit ;)

Anyways, the main issue here is that your connection is getting dropped. This is usually caused due to a faulty line. Pickup your telephone, dial a number and listen- do you hear any sort of noise? Also, did you connect the ADSL filter properly? Remember, there should be no parallel connections/extentions to your phoneline before the filter- all parallel lines/extensions should be made after and through the filter only! Any sort of extension before the filter creates noise in the line.

Secondly, try getting a hold of some other router and connect using it, to check if its a problem with the line or router.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Camtasia 2026.1.3 by Razvan Serea TechSmith Camtasia is the complete professional solution for high-quality screen recording, video editing and sharing. Camtasia 2026 makes editing your videos easier, and faster than ever. The new editor is packed with enhanced video processing, all-new production technology, an innovative library, and stock videos and other creative assets to help you create more polished, professional videos. No video experience needed. Anyone can create informative, engaging videos. Create professional, eye-catching videos: Add special video effects - Apply Behaviors that are perfectly designed to animate your text, images, or icons. Get a crisp, polished look without being a professional video editor. Drag-and-drop your edits - What you see is what you get. Every effect and element in your video can be dropped and edited directly in the preview window. And you can edit at resolutions up to beautiful 4K, for clear video at any size. Get exceptional performance - Camtasia takes full advantage of your computer’s processor with 64-bit performance. You’ll get fast rendering times and enhanced stability—even on your most complex projects. Camtasia 2026.1.3 changelog: Feature Updates Improved keyboard navigability in tool panels. Improved screen reader accessibility of headings in Preferences. Tool panels can now be resized using a keyboard-navigable control. Updated color of folder icon in User Library tab for better visibility. Grouped media now render a composite waveform considering all audio media within that group. Added Long Path Aware to the manifest of Editor and Recorder. Performance Improvements Improved performance for editing groups on the timeline. Improved the project loading performance when timeline has lots of trec media with cursor data. Updates for IT Administrators Updated cpp-httplib from 0.38.0 to 0.43.3. Updated expat from 2.7.4 to 2.8.0. Updated freetype from 2.13.3 to 2.14.3. Updated harfbuzz from 13.0.1 to 14.2.0. Updated libpng16 from 1.6.55 to 1.6.58. Updated pango from 1.57.0 to 1.57.1. Updated girepository from 2.86.3 to 2.88.0. Updated pcre2-posix from 10.47.0 to 12.0.2. Added new harfbuzz-gpu.dll. Updated FFmpeg from 7.1.1 to 7.1.2. Updated aom from 3.11.0 to 3.13.1. Updated dav1d from 1.5.0 to 1.5.1. Updated ogg from 1.3.5 to 1.3.6. Updated SDL2 from 2.32.4 to 2.32.10. Updated zlib from 1.3.1 to 1.3.2. Updated Nalpeiron binaries to version 4.4.69.3. Bug Fixes Fixed an issue which prevented some user submitted crash reports from being sent. Fixed a potential memory leak when decoding HEVC or VP9 video. Fixed a potential crash when trying to delete a range selection on a magnetic track. Fixed a bug with the Properties Panel showing stale properties when only a caption is selected on the timeline. Fixed an issue that could prevent the Opacity and Blur properties from being changed in the Background Removal effect. Fixed an issue where larger Camtasia online projects may fail to open in Camtasia Editor. Table of contents thumbnails are no longer created for Smart Player exports with no table of contents. Fix resetting skew revert to revert just skew and not scale as well. Fixed editing in Snagit with snagX file with Unicode characters. Fixed a bug where grouped visual media could be cropped in some cases. Fixed importing SnagX files with Unicode characters. Localization fixes. Download: Camtasia 2026.1.3 | 309.0 MB (Shareware) View: Camtasia Homepage | Tutorials | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • yeah it seems to be Edge only. The dialog buttons work as expected in Chrome and Firefox. The phone is using Android 16 (OneUI 8.5) and Edge version  149.0.4022.53
    • I'm not aware of this issue, but to help the other guys.  What version of Android are you using? Did you try a different browser? To see if Edge is the issue here.
    • I agree when are you going to read this (really poor BTW) article? Here is a better article so you actually know what is going on and answers questions you had in other comments --> https://arstechnica.com/gadgets/2026/05/speed-boosting-low-latency-profile-is-one-of-the-improvements-coming-to-windows-11/ It is unclear if one will be able to disable the new profile at this point but I am not seeing any reason why one would.
  • Recent Achievements

    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
    • One Year In
      slackerzz earned a badge
      One Year In
  • Popular Contributors

    1. 1
      +primortal
      512
    2. 2
      PsYcHoKiLLa
      188
    3. 3
      +Edouard
      157
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!