Reinstalling XP Using The I386 Folder


Recommended Posts

Right i'll give you a little background information first. My mates sister clicked on one of them MSN virus, namely the "Is this you" one. He ran a virus scan and he found 176 viruses (a quarter of them might of been from before but doesnt matter). It got rid of them all but now everytime he starts up ZoneAlarm it comes up with this message saying do you want to delete, rename or quarantine this one virus he cannot get rid of. He tried all of them which failed. He's decided he's going to reinstall XP not just 'coz of that but it was running slow recently and all that so I suppose now is a good time.

Now onto my question, can you create a bootable CD using the I386 folder on my computer and then put it in his and then reinstall XP that way? Is this possible and if so, how? Note, both copies of XP are legit.

Cheers, Luke.

So do you reckon I could use the files from the I386 folder on my computer to create the bootable CD and then stick that in my mates sisters laptop and then follow the "Reinstalling Windows" instructions on that page? I ask this because would it accept a CD that was made on another computer?

Cheers, Luke.

That won't be an issue. You are copying files that are required to install XP. Just have your product keys at the ready when asked during the reinstall process. Oh, and before you do any of this I suggest you make a backup of essential docs, pics etc.

Hope you sort it out!

edit

I was thinking of asking him that too but I'm guessing he doesn't have recovery disks. You should check to see if your laptop brand has another internal way of reinstalling windows like Acer does. I can't recall it, but if everything goes to pot on an Acer you hold some keys down during reboot and you can reinstall the OS.

  BeLGaRaTh said:
Just a quick thought, why not just use either yours or your mates sisters XP disk, or the recovery disks provided?

Neither come with one, both are from retail stores (PC World & Comet) which I am led to believe rarely provide recovery or XP CD's to save them and customers money.

  nanuk said:
That won't be an issue. You are copying files that are required to install XP. Just have your product keys at the ready when asked during the reinstall process. Oh, and before you do any of this I suggest you make a backup of essential docs, pics etc.

Hope you sort it out!

Thanks alot, I hope too ;).

  lukeronaldo7 said:
Neither come with one, both are from retail stores (PC World & Comet) which I am led to believe rarely provide recovery or XP CD's to save them and customers money.

Damn, thats harsh, but surely they would have given the option when first booting? Oh well, Im glad I have always built my own systems rather than a bought one :)

Hope you get it sorted

I don't believe it, I now started his laptop up and I get the option to start in "safe mode", "last known good configuration" or "start windows normally". I've tried all 3 of them and I get the same outcome, the Windows XP logo comes up for about 5 seconds then this blue screen white write writing pops up for about 1 second (not giving me a chance to read it) and restarts. She installed a webcam recently, would this be it? What can I do to get into the laptop and allow me to reinstall windows?

No thats what I'm doing lol. I'm creating the the boot CD on my computer. But I've now started his laptop up only to see I can't get into Windows. So how am I meant to do the last part where it says "Browse to the 'i386' folder on the hard drive, Double-click winnt32.exe." if I can't get into Windows?

Edit: Or do you need to be in Windows to do that?

Edited by lukeronaldo7

From what I gather, you boot from the newly made cd not the computer so when you boot up make sure it's from the cd drive first not the hard drive. That should get you into windows then from there into his i386 folder.

I hate it when these things happen...I know exactly how it feels.

Right thanks for that, you've been a great help. I'm stuck on the last hurdle (suprise suprise). You see where it says "Browse to the 'i386' folder on the hard drive." well I goto Local Disk (C:) but it shows as nothings in there? Am I reading it right :s.

  lukeronaldo7 said:
No thats what I'm doing lol. I'm creating the the boot CD on my computer. But I've now started his laptop up only to see I can't get into Windows. So how am I meant to do the last part where it says "Browse to the 'i386' folder on the hard drive, Double-click winnt32.exe." if I can't get into Windows?

Edit: Or do you need to be in Windows to do that?

if you make a bootable XP cd... then you dont have to run winnt (when in dos) winnt32 (when in windows). If you have done this properly, you can boot from the CD and follow the instructions from there. Careful though, you might wipe out everything (unless that is what is desired).

If this is a name-brand computer (ie. HP, Dell, IBM, etc) then you could run the recovery by pressing an F-key (ie. F11 or F3 or something like that) at the initial boot screen and begin the recovery process that way. This process will wipe out everything as well.

Sorry for being a bit thick here, but i've done everything it said on this website upto "Browse to the 'i386' folder on the hard drive" which I cannot do because it says nothing is in Local Disk C.

So now what am I meant to do? Have I done it?

Oh and metalguy, the computer is Toshiba, would they have one?

Edit: Here is what it looks like

67o7qr9.jpg

Edited by lukeronaldo7

I'm looking around for any other info too. But according to the picture you've posted it appears that there's nothing on the c drive which doesn't make sense. Have you tried to locate the i386 folder by browsing to the c drive yourself?

What i mean is not to use Select 'Go' | 'Programs' | 'A43 File Management Utility' ....instructions from the mentioned site?

Okay, I'm trying out the same method to see if there's anything i can find to help.

edit

okay, upon creating the bartpe disc i got a warning about building from an OEM version of xp as it could cause problems.

And I ran into immediate problems as it wouldn't work. I never got as far as the menu system. Just error messages about missing winlogon.exe

Edited by nanuk

Okay using an oem disk does create problems with the boot cd and it seems that you need to install plugins before burning it.

This is causing more difficulties than I imagined. However I do have an alternate xp install disc so I suggest you use the same if you know someone with one. It'll be a lot easier.

If you have an i386 folder in your drive, then it most probably is an OEM CD - therefore, even if you create a bootable CD from it, you'll be able to install it only on your computer - unless your friend is also having the exact same PC.

You can confirm it by opening the file setupp.ini in the i386 folder. In the second line, if you see something like Pid=55274OEM then it's an OEM disk.

No, you can burn one, but there may be errors - usually OEMs customize the XP Setup so that it'll automatically install the necessary drivers, software and so on. Or they may even remove drivers for certain hardware that isn't present on that PC. It depends on the extent of customization they've done.

For eg, take the Dell CDs. The Dell loader reads the system BIOS before the setup, and if the system BIOS is not genuine Dell, the OS will not install.

So what I'm saying is, you may be able install it on another PC, but there's no guarentee that it'll work perfectly.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It's a Dell color laser printer. Back when Microsoft kept having these security flaws with the print spooler and recommending you disable it I just got in the habit of it, and I use it so rarely now I just leave it disabled in case another flaw pops up.
    • KDE makes progress toward full Wayland session restore in Plasma 6.5 by David Uzondu In the latest issue of This Week in Plasma, the development team, as usual, brings news of ongoing work for the desktop environment. While KDE continues to polish the recently released Plasma 6.4, work has already taken off on the next major version of Plasma, 6.5. A significant step forward is being made on Wayland session restoration; the xx-session-management-v1 restore protocol has been implemented in Qt 6.10, which means KDE applications and Plasma itself can soon start using it to finally bring proper session restore to Wayland. For more immediate user-facing changes in Plasma 6.5, the Welcome Center application now teaches you about the many available keyboard shortcuts, as well as "what the heck the 'Meta' key is." For those who frequently work remotely, Plasma's built-in RDP server now supports syncing clipboard text between the client and server. The clipboard also received another useful feature, letting you copy the QR code for an item, not just view it. The team is also addressing smaller usability issues across the desktop, including fixes that will land in point releases for Plasma 6.4. Spectacle, for example, will no longer show a ghostly semi-transparent version of its menus in screenshots. The New! badge, which was introduced in Plasma 6.4 is now easier to read with better colors. Other notable UI improvements include: A new button on the "missed notifications" pop-up that lets you view what you actually missed. The Networks widget is now much better at telling you what it is doing, like when it is "looking for wireless networks". Inertial scrolling with touchpads is now active in all QtQuick-based KDE software. As always, the KDE team spent the week squashing bugs across various versions of Plasma and related software. Plasma 6.4.1, which went live this Tuesday, addressed several crashes in the desktop portal implementations and patched the open/save dialog, where apps could insert extra UI elements in the wrong places. It also resolved a recent performance regression affecting some games and fixed a strange issue with drawing tablets where the pointer could disappear when two were connected in different modes. 6.4.1 tackled a particularly odd hardware-specific problem with Samsung Odyssey G5 monitors endlessly turning on and off because of a faulty DDC implementation. KDE responded by blacklisting the device. In addition to that, the update fixed an accessibility regression in Discover, corrected an issue where deleting a favorited app left behind a ghost item you couldn't un-favorite, and restored the Window List widget's ability to minimize windows. As for fixes planned for 6.4.2, here's the full list as outlined by the Plasma team: Fixed a case where System Settings' Flatpak App Permissions page could cause the whole app to crash. Fixed an issue that could sometimes cause Plasma to go back to sleep again right after waking up, when the "Sleep then hibernate" setting is in use. The appearance of text labels in Folder View pop-ups is once again correct. You're no longer erroneously prompted to authenticate for a Wireguard VPN whose credentials are already stored in KWallet, and the wallet is set up to automatically open at login. Fixed an issue in the KDE desktop portal's screenshot implementation that prevented the delay setting from taking effect. Missing app backends listed in Discover's Settings page once again show the correct names. The brightness level shown on System Settings' Display & Monitor page now matches the one shown in Plasma. Fixed an issue that caused the panel to have too much space in it until restarting Plasma if you stop displaying the date on a horizontally-laid-out Digital Clock widget. The older Plasma 6.3.6 fixed video stuttering on variable-refresh-rate screens and patched the Weather Report widget after Environment Canada changed its data format. You can check out the full update on the official KDE Blog.
    • I'm happy with my setup. I have a raid 1 two drive Synology setup that I backup with Time Machine to every so often. What is your setup at home? 
    • Enterprise support (ex. Premier Support) is a bit different cup of coffee. I am not saying it is great, but they have SLAs and I have received solution within hours and even patches within 3 days.
    • Thank you, for not reading the comments above and just reading the root comment... it is just like reading only the headline of an article.
  • Recent Achievements

    • One Year In
      TsunadeMama earned a badge
      One Year In
    • Week One Done
      shaheen earned a badge
      Week One Done
    • Dedicated
      Cole Multipass earned a badge
      Dedicated
    • Week One Done
      Alexander 001 earned a badge
      Week One Done
    • Week One Done
      icecreamconesleeves earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      569
    2. 2
      ATLien_0
      187
    3. 3
      +FloatingFatMan
      184
    4. 4
      Skyfrog
      112
    5. 5
      Som
      108
  • Tell a friend

    Love Neowin? Tell a friend!