Reinstalling XP Using The I386 Folder


Recommended Posts

Right i'll give you a little background information first. My mates sister clicked on one of them MSN virus, namely the "Is this you" one. He ran a virus scan and he found 176 viruses (a quarter of them might of been from before but doesnt matter). It got rid of them all but now everytime he starts up ZoneAlarm it comes up with this message saying do you want to delete, rename or quarantine this one virus he cannot get rid of. He tried all of them which failed. He's decided he's going to reinstall XP not just 'coz of that but it was running slow recently and all that so I suppose now is a good time.

Now onto my question, can you create a bootable CD using the I386 folder on my computer and then put it in his and then reinstall XP that way? Is this possible and if so, how? Note, both copies of XP are legit.

Cheers, Luke.

So do you reckon I could use the files from the I386 folder on my computer to create the bootable CD and then stick that in my mates sisters laptop and then follow the "Reinstalling Windows" instructions on that page? I ask this because would it accept a CD that was made on another computer?

Cheers, Luke.

That won't be an issue. You are copying files that are required to install XP. Just have your product keys at the ready when asked during the reinstall process. Oh, and before you do any of this I suggest you make a backup of essential docs, pics etc.

Hope you sort it out!

edit

I was thinking of asking him that too but I'm guessing he doesn't have recovery disks. You should check to see if your laptop brand has another internal way of reinstalling windows like Acer does. I can't recall it, but if everything goes to pot on an Acer you hold some keys down during reboot and you can reinstall the OS.

  BeLGaRaTh said:
Just a quick thought, why not just use either yours or your mates sisters XP disk, or the recovery disks provided?

Neither come with one, both are from retail stores (PC World & Comet) which I am led to believe rarely provide recovery or XP CD's to save them and customers money.

  nanuk said:
That won't be an issue. You are copying files that are required to install XP. Just have your product keys at the ready when asked during the reinstall process. Oh, and before you do any of this I suggest you make a backup of essential docs, pics etc.

Hope you sort it out!

Thanks alot, I hope too ;).

  lukeronaldo7 said:
Neither come with one, both are from retail stores (PC World & Comet) which I am led to believe rarely provide recovery or XP CD's to save them and customers money.

Damn, thats harsh, but surely they would have given the option when first booting? Oh well, Im glad I have always built my own systems rather than a bought one :)

Hope you get it sorted

I don't believe it, I now started his laptop up and I get the option to start in "safe mode", "last known good configuration" or "start windows normally". I've tried all 3 of them and I get the same outcome, the Windows XP logo comes up for about 5 seconds then this blue screen white write writing pops up for about 1 second (not giving me a chance to read it) and restarts. She installed a webcam recently, would this be it? What can I do to get into the laptop and allow me to reinstall windows?

No thats what I'm doing lol. I'm creating the the boot CD on my computer. But I've now started his laptop up only to see I can't get into Windows. So how am I meant to do the last part where it says "Browse to the 'i386' folder on the hard drive, Double-click winnt32.exe." if I can't get into Windows?

Edit: Or do you need to be in Windows to do that?

Edited by lukeronaldo7

From what I gather, you boot from the newly made cd not the computer so when you boot up make sure it's from the cd drive first not the hard drive. That should get you into windows then from there into his i386 folder.

I hate it when these things happen...I know exactly how it feels.

Right thanks for that, you've been a great help. I'm stuck on the last hurdle (suprise suprise). You see where it says "Browse to the 'i386' folder on the hard drive." well I goto Local Disk (C:) but it shows as nothings in there? Am I reading it right :s.

  lukeronaldo7 said:
No thats what I'm doing lol. I'm creating the the boot CD on my computer. But I've now started his laptop up only to see I can't get into Windows. So how am I meant to do the last part where it says "Browse to the 'i386' folder on the hard drive, Double-click winnt32.exe." if I can't get into Windows?

Edit: Or do you need to be in Windows to do that?

if you make a bootable XP cd... then you dont have to run winnt (when in dos) winnt32 (when in windows). If you have done this properly, you can boot from the CD and follow the instructions from there. Careful though, you might wipe out everything (unless that is what is desired).

If this is a name-brand computer (ie. HP, Dell, IBM, etc) then you could run the recovery by pressing an F-key (ie. F11 or F3 or something like that) at the initial boot screen and begin the recovery process that way. This process will wipe out everything as well.

Sorry for being a bit thick here, but i've done everything it said on this website upto "Browse to the 'i386' folder on the hard drive" which I cannot do because it says nothing is in Local Disk C.

So now what am I meant to do? Have I done it?

Oh and metalguy, the computer is Toshiba, would they have one?

Edit: Here is what it looks like

67o7qr9.jpg

Edited by lukeronaldo7

I'm looking around for any other info too. But according to the picture you've posted it appears that there's nothing on the c drive which doesn't make sense. Have you tried to locate the i386 folder by browsing to the c drive yourself?

What i mean is not to use Select 'Go' | 'Programs' | 'A43 File Management Utility' ....instructions from the mentioned site?

Okay, I'm trying out the same method to see if there's anything i can find to help.

edit

okay, upon creating the bartpe disc i got a warning about building from an OEM version of xp as it could cause problems.

And I ran into immediate problems as it wouldn't work. I never got as far as the menu system. Just error messages about missing winlogon.exe

Edited by nanuk

Okay using an oem disk does create problems with the boot cd and it seems that you need to install plugins before burning it.

This is causing more difficulties than I imagined. However I do have an alternate xp install disc so I suggest you use the same if you know someone with one. It'll be a lot easier.

If you have an i386 folder in your drive, then it most probably is an OEM CD - therefore, even if you create a bootable CD from it, you'll be able to install it only on your computer - unless your friend is also having the exact same PC.

You can confirm it by opening the file setupp.ini in the i386 folder. In the second line, if you see something like Pid=55274OEM then it's an OEM disk.

No, you can burn one, but there may be errors - usually OEMs customize the XP Setup so that it'll automatically install the necessary drivers, software and so on. Or they may even remove drivers for certain hardware that isn't present on that PC. It depends on the extent of customization they've done.

For eg, take the Dell CDs. The Dell loader reads the system BIOS before the setup, and if the system BIOS is not genuine Dell, the OS will not install.

So what I'm saying is, you may be able install it on another PC, but there's no guarentee that it'll work perfectly.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • I'm sure Denmark would stand to lose a lot if US consumers stopped buying Danish products, whether that's Lurpak butter or hi-fi equipment.
    • JD Vance will be the next President. Who've the Democrats got? Harris again? lol....
    • Microsoft Edge gets new password feature and security fixes by Taras Buria Microsoft has released a new update for the Edge browser in the Stable Channel. Version 137.0.3296.83 introduces a new password feature and fixes security vulnerabilities to make your browsing experience safer. Starting with new features, Microsoft Edge 137 now supports Secure Password Deployment. Microsoft recently announced this for IT admins, allowing them to share encrypted passwords with user groups. This service lets users log into websites without seeing their passwords, thus enhancing the organization's security. You can read more about Microsoft Edge Secure Password Deployment in our recent article here. Security updates in Microsoft Edge 137.0.3296.83 include two fixes for Chromium vulnerabilities: CVE-2025-5958: Use after free in Media in Google Chrome prior to 137.0.7151.103 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) CVE-2025-5959: Type Confusion in V8 in Google Chrome prior to 137.0.7151.103 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) You can update Microsoft Edge to the latest version by heading to edge://settings/help. The browser can also update itself automatically in the background and apply updates between restarts. In case you missed it, Microsoft released Edge 137 by the end of May. The update deprecated quite a lot of existing features, including Wallet, Image Editor, Image Hover, Mini menu, and Video Super Resolution. It also introduced Web Content Filtering and enhancements for the picture-in-picture player and Find on Page in Microsoft Edge for Business. The next feature update for Microsoft Edge, version 138, is expected on the week of June 26, 2025, as part of the standard four-week release cadence.
    • Microsoft commits to upskill 1 million UK workers in AI this year by Paul Hill Microsoft has partnered with the UK government in the latter’s ambitious plan to train 7.5 million workers in AI skills over the next five years. Specifically, Microsoft has committed to upskilling 1 million of those workers by the end of this year. This represents a significant portion of the overall target and within a very short timeframe. The education drive by Microsoft builds on its previous “Get On” program, which has given 1.5 million people basic digital skills. The effort to train up 1 million British workers in AI is part of Microsoft’s broader £2.5 billion investment in UK AI infrastructure. Ensuring workers have the skills to leverage AI tools is important. Microsoft CEO UK Darren Hardman said recently that two-thirds of business people wouldn’t hire someone lacking AI skills, showing just how vital it is to get people’s skills up to date. Microsoft's approach to AI skills development Microsoft has several platforms to offer AI training, including Microsoft Learn, AI Skills Navigator, and through partnerships with non-profit organisations such as Catch22 in the UK. Its educational materials cover everything from the basics of generative AI to helping you prepare for advanced roles like being an AI engineer. With Catch22, Microsoft helps to train people who face various challenges to getting tech skills, including gender and ethnicity barriers, homelessness, mental health issues, school exclusion and disability. Microsoft is also trying to get more women into tech fields through programmes like TechHer, where it has trained thousands of women across UK government departments. Many of the courses that Microsoft offers come complete with certificates that you can show off on your CV when applying for a job to impress potential employers and land a job. Who else is partnering with the UK government? While Microsoft is playing a massive role in the government’s plans, it’s not the only big tech giant helping out. The firms that have partnered with the government are: Accenture, Amazon, Barclays, BT, Google, IBM, Intuit, Microsoft, Sage, SAS, and Salesforce. While all of these firms are helping to train workers, Microsoft’s planned efforts are the most notable. This initiative by the government will help the country brace for the changes AI is expected to bring to the economy. In April, the United Nations said that AI will affect 40% of all jobs, so being ready is a must.
    • Microsoft has an update on Exchange Online Basic Auth removal for Office 365 by Sayan Sen Back in 2022, Microsoft announced the retirement of Basic Authentication as it was moving to modern OAuth 2.0 token-based authentication. The reason was simple, to move away from such simple username-password authentication to more secure sign-ins. While Microsoft had previously planned to "permanently remove support for Basic authentication with Client Submission (SMTP AUTH) in September 2025", the company has now updated this timeline, adding a final delay. Perhaps this was on the cards given that Microsoft recently extended Basic Auth support for High Volume Email to 2028. On the Microsoft 365 Admin Center, a new message has been posted that details the changes regarding SMTP (Simple Mail Transfer Protocol) AUTH Client Submission. The message says: Thus, starting March 1, 2026, Exchange Online will begin phasing out Basic authentication for sending emails via SMTP AUTH. At first, fewer attempts will be blocked, but by April 30, 2026, this older method will be fully disabled. After that, any apps or devices that want to send email this way will need to use OAuth. The message further adds how admins can proceed with the changes in case OAuth is not supported: Users who have access to the M365 Admin Center can view the message under ID MC786329.
  • Recent Achievements

    • Week One Done
      LagFighterZ earned a badge
      Week One Done
    • First Post
      ThatGuyOnline earned a badge
      First Post
    • One Month Later
      5i3zi1 earned a badge
      One Month Later
    • Week One Done
      5i3zi1 earned a badge
      Week One Done
    • Week One Done
      julien02 earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      540
    2. 2
      ATLien_0
      224
    3. 3
      +FloatingFatMan
      160
    4. 4
      Michael Scrip
      115
    5. 5
      +Edouard
      91
  • Tell a friend

    Love Neowin? Tell a friend!