• 0

Kaspersky 7 vs NOD32


Question

So I read that NOD32 isnt doing too well in its detection compared to Kaspersky - and Kaspersky is now apparently pretty damn light, so lemme ask - whats the fastest performer out of the 2?

Im using NOD32 on Vista at the moment and dont particularly wanna change but if I can get better detection at the same if not better performance.

Why the hell not? XD

Link to comment
https://www.neowin.net/forum/topic/562199-kaspersky-7-vs-nod32/
Share on other sites

Recommended Posts

  • 0
Kasperksy Internet Secuirty is better than the NOD Internet Securirty, I tried both, Kasperksy is better for people with less knowledge about comptuer stuff, I think NOD had a better firewall though...

I made the switch from Outpost which I believe is one of the best firewalls out there. Made the switch because of their inability to get a working Vista version out. With that said, I see nothing in KIS 7.0 that is lacking in comparison to Outpost. The one thing that bothered me is it's affect on bandwidth for those on how bandwidth connections but the switch to KIS 7 from 6 made a huge difference.

I urge everyone to give it a try. You get two very good/mature security apps in one. Plus, it's very easy to find KIS on sale for almost nothing even though the msrp is something like $75. I paid $5 after rebates for mine in May through Frys

  • 0
Same here :(

I've been a LONG time NOD32 user, and tried KAV6 a while ago, didn't like it.

Installed KAV7 yesterday - WOW!

2 Trojans (6-different infections) found on my PC.

Worst of all, you go to NOD32's forums and you write: "NOD32 didn't detect this on my system (found it w/ KAV)" and a MILLION FRIKKIN FANBOYS will say you're a trouble-monger, downloading exquisite virii on purpose and preetending to be infected and that despite your infiltrations NOD32 remains a better product.

That turned me off. big time.

As soon as KAV markets v7 final I'm buying a license. Even though my NOD32 has 7 more months to go.

Second that. The KAV demo detected so many viruses which my resident NOD32 didn't.

  • 0

I'm sure I've responded in enough posts similar to this one and I'm sure this will always be a topic of discussion on Neowin. What makes me happy about it is the fact that you guys seem like you are security-conscious, which is something I love to see. (irregardless of age) That's what seems to bring me back to threads like this. It's the people sharing their experiences with the software; good, bad or indifferent that make them worthwhile reads in the forums.

My shortest answer in any of these threads will most likely be "you should feel pretty darn safe from an AV standpoint if you are using one or the other". I'll add a bit more below.

Lol, NOD32 let in 13 viruses when I done a test on my crappy Test Laptop.

Kaspersky is slower but it detected all of them.

I've been using KAV7 beta and it's pretty stable but there are a few memory leeks and other things that get a tad annoying.

I'm using your quote because this seems to be commonly heard by me from end users that may have missed some of the configuration settings they could have activated with NOD32. Of course, I am not at all saying that you don't have it configured correctly - I'm simply saying that this could be possible for posts like this.

Some of the people who have been recommended to use NOD32 are also given the link to Blackspear's Guide for some of the extra NOD32 settings, which improve upon detection ratings, as opposed to a software product that is simply configured in the Typical setup fashion and then allowed to run with no other changes or tweaks to the scan engine.

Without boring you guys with a ton of details I'll offer that Kaspersky seems to set itself up for better detection than NOD32 out of the box and that (on some machines) has an affect on what is detected. NOD32 takes more work on the back-end post-install to configure it to really get those engines working for you to detect the sneakier items.

I can say that there are reasons for both...Kaspersky wants the better detection right out of the box, and NOD32 wants to keep things a bit more neutral or system compatible out of the box - until you, the end user or admin decides to activate what needs activating or configuring. That's my take from the experience from myself and plenty of other users, company conversations, observations, etc. It's a catch-22 for me though guys...I end up turning things ON with NOD32, and I end up turning things OFF in Kaspersky.

bullet_red.gif Kaspersky out of the box ... inefficient but has a high detection rating

bullet_orange.gif NOD32 out of the box ... efficient but has a medium detection rating

And I don't think one is right and one is wrong ... it's simply a different company practice, that's all.

NOD32 and Kaspersky are the two top A-Vs, try 'em n pick the one you like better.

In the simplest forum posting to get to the bottom line, I think Hankyone says it best.

I resell both of these products and I simply evaluate a network or PC, laptop, etc. and choose one based on system specs, environment, management, etc. There are factors when choosing either or, but in the end I feel that I have provided a great solution for a client no matter which one I have chosen to propose to them.

have they fixed the memory hog when Kaspersky starts up?

The only real thing I've gotten out of that when version 6 was being used was the Startup Scan causing this behavior. Mine would literally run for hours and not stop and eventually sap my system's memory. You could really feel the load.

In the later versions of 6 they have made it feel lighter, but my support experience has been to disable the scan altogether.

====================

information.gif Right now I am using NOD32 and my laptop has been just fine with its protection. I had used KIS6 in the past and found that something eventually breaks it. (But once again, your mileage will vary from mine)

And in its defense, an MS update could be breaking it...who knows? But when I would update from an existing version (just a minor build update), my NIC would stop working. It would be present in device manager but it would not be listed if I did an IPCONFIG, nor would I be able to communicate with it anymore, period.

Never have I had so many problems with Kaspersky since I started using KIS...and this makes no difference if I wipe the settings first, and uninstalling, or installing over the top. It's just the way it has worked for me. When I started using the workstation version, I could install Windows XP SP2 from scratch, then install Kaspersky Workstation and the machine would BSOD on reboot and I'd have to re-format and start over.

Never have I ever had NOD32 give me problems like that, ever. It makes me a little nervous around Kaspersky products...because I'll be honest, I never really worried about making sure a PC was imaged before installing an AV package, but Kaspersky scared me into doing just that.

And on the flip-side, I use a BartPE CD with KAV 6.x on it to remove viruses and spyware from machines. Most times (these days) I'll get a spyware infection and it'll infect winlogon.exe. For those of you who have gone through ridding a PC with spyware infecting that file, you know it's not the easiest thing to get rid of with a standard spyware scanner.

KAV always detects and removes it, and then I use a backed up copy of the winlogon.exe file and restart and the PC is good to go. Even as a spyware scanner KAV is quite a "willing and able" participant.

Those are just my thoughts on this and sorry it was so darn long. Hopefully some of you found some useful information somewhere inside all the ramblings :p

  • 0

i did have a few probelsm with kis in the past but nod32 has never given me any problems but if your not sure about it load up extra protections and thats all u need and do ur research on stuff.

  • 0

Glad you guys found it useful.

error.gif I found out through my own experiences that if your quarantine gets ... well ... out of hand, it will cause performance hits on your workstation.

When you follow Blackspear's guide, you quarantine files no matter what. So in most cases, viruses are simply not cleaned, because these days the files are malicious to begin with and don't require a cleaning. They simply need to be removed. Of course, not all the time, which is why his settings are so safe to use.

BUT, sometimes when you check 15 different POP3 accounts (insert reason here) and NOD32 scans and quarantines those files, most of them will be quarantined 2x with Blackspear's settings. The first time will be during the clean attempt and the second time will be when it moves the file to quarantine.

Now this could have been changed in the later revisions, which I have since them resolved by other means on my end. But what would happen is the quarantine folder would get so filled up it would cause very noticeable startup delays when my laptop started.

I think I had mentioned this way back in the past but never posted about it in the forums because I simply took care of it on my own through a cleaning process. When NOD32 starts, it does a security check to make sure everything is looking fine with its internals. Part of that process scans the quarantine folder and I had literally tens of thousands of viruses in my quarantine from my POP3 accounts. I would notice a lag after having about 500-1000 viruses present in that folder.

I found out by going doing a filemon trace with the popular tool from sysinternals (now owned by Microsoft) when I had a suspicion it was a file lag issue. The trace file starts the record process upon boot by request. So when I checked it out I noticed that it would scan every single file in the quarantine before NOD32 would really be ready for use on the laptop.

So if you use batch files, CCleaner, or any other program that allows custom folder additions, consider making it routine or part of another scheduled app to delete what is in the quarantine for NOD32 on a regular basis if you deal with a lot of quarantined files.

I'm sure not many people will find they need to use any of this information but if someone has this issue and finds this post, they'll be glad they read through it.

  • 0
I wouldn't wanna use your computer.

lol, why not, it runs very well.

i hope you're kidding

nope, not kidding, i don't see the need to run antivirus on my pc. A little bit of common sense goes a long way.

I havn't had a virus on my system since, well, i've never had one.

i only run av software on pc's that are used by others in the home though, sister's pc, brother's pc etc.

  • 0

I loved KAV 5, but for me, KAV 6 was a big let down.

It gave me nothing but problems, so after using KAV 5, I moved to NOD.

Haven't tried KAV 7, I know it's already being marketed in France, but when the American/UK Kaspersky site markets V7, I'll trial it. May use that if the problems I had in V6 are gone.

That being said, I'm currently using NAV 2007, and am very happy.

  • 0

NOD32 v3 Security Suite will kick ass once the final version is released. I'm using NOD32 2.7 now and it works great for me, very fast and great detection. NAV2007 seemed to have slightly better detection, but it was still a resource hog (but not as bad as previous NAV). I have not tried Kaspersky...

  • 0
nav2007 is one of the worst beasts out there,it will control you unless you break it and use something better.

NAV 2006 and earlier were like that. 2007 was completely re-designed to reduce memory usage and increase detection/removal rates. It's a much better product than it used to be.

That being said though, I'd still take KAV or NOD32 over it.

  • 0

Neither. Common sense, computer sense and good software.

If you get a mass infection, backup data, format, use DeepFreeze or Acronis True Image, Norton Ghost, etc.

People seem so picky about detection rates and memory usage. If you run out of memory, it will go to the swap/page file which uses a fraction of your HDD space as virtual memory. "Thrashing". Use the memory you have. That's not to say you should use Norton. Avoid.

Regardless of what infection you have, either should maim it. But why not take steps to avoid it as mentioned above and not bother with anti-virus.

Some people even think that if you don't have a firewall or anti-virus installed that you'll automatically become infected. LOL

  • 0

The more I hear about "common sense", the less common it seems to be, and some people have quite a skewed view on what they believe to be common sense when referring to computer safety. And to be honest, loading up some type of AV protection on my PC seems to be common sense to me.

Computer sense definitely comes with a price and much time invested. And the software, like Acronis or Deep Freeze does as well. Say what you want about Deep Freeze, but it won't stop you from getting infected, period. It's software to keep the PC static, that's it. You can be infected for a month on a machine that you don't reboot and broadcast plenty of traffic on a network and bring it down. And this could happen with a virus 3 years old. So using AV software with even out of date definitions would keep you protected from such a threat.

And irregardless of who shares the same opinion or disagrees with me, I'll tell you this: the day you walk into a business (as an IT guy) and talk about "common sense" and "computer sense" and Deep Freeze and didn't want to bother to install AV is the day they stop the interview and walk you right out of the building. Then again, they might hire you just to find out what the boss says to you when you ask him why his PC got infected and why he didn't use his common sense to stop it from happening.

Go into any reputable PC shop and ask them whether or not it's a good practice to load on some type of anti-virus protection and just tell me what they say...I'm curious.

Look, I simply don't see how removing a layer of workstation security and replacing it with some type of workaround that should supposedly work if you use "common sense" doesn't scream oxymoron.

  • 0

Why not have this "common sense," with an extra security of an anti-virus?

And yes, I believe that being smart about browsing the internet is a great way to avoid viruses, but it's better to have something there in case you miss something. And you might be infected without knowing it.

Anyway, why would you want something like deep freeze? You have to unfreeze it every time you want to install a program to be there every time you restart, which might implant a virus, leaving a huge hole because you don't have antivirus :/

  • 0

so for kaspersky is this kis the one you want or the kaspersky antivirus?also common sense wont save you once/if you've been infected.the day viruses n bad stuff are no more(LOL thats funny)then there will be no need for av,i tried kaspersky and it picked up something nod32 missed and the bad trojan was in my system32 directory and i use common sense and it still wont protect me,common sense would if we had no internet.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Win11Debloat 2026.06.14 by Razvan Serea Win11Debloat is a lightweight, easy to use PowerShell script that allows you to quickly declutter and customize your Windows experience. It can remove pre-installed bloatware apps, disable telemetry, remove intrusive interface elements and much more. The script also includes many features that system administrators and power users will enjoy. Such as a powerful command-line interface, support for Windows Audit mode and the option to make changes to other Windows users. All changes made by Win11Debloat can be easily reversed, and most removed apps can be restored via the Microsoft Store. A full guide on how to undo the changes is available here. Win11Debloat features: Below is an overview of the key features and functionality offered by Win11Debloat. Please refer to the wiki for more information about the default settings preset. Remove a wide variety of preinstalled apps. Click here for more info. Disable telemetry, diagnostic data, activity history, app-launch tracking & targeted ads. Disable tips, tricks, suggestions & ads across Windows. Disable Windows location services & app location access. Disable Find My Device location tracking. Disable 'Windows Spotlight' and tips & tricks on the lock screen. Disable 'Windows Spotlight' desktop background option. Disable ads, suggestions and the MSN news feed in Microsoft Edge. Hide Microsoft 365 ads on the Settings 'Home' page, or hide the 'Home' page entirely. Disable & remove Microsoft Copilot. Disable Windows Recall. Disable Click to Do, AI text & image analysis tool. Prevent AI service (WSAIFabricSvc) from starting automatically. Disable AI Features in Edge. Disable AI Features in Paint. Disable AI Features in Notepad. Disable the Drag Tray for sharing & moving files. Restore the old Windows 10 style context menu. Turn off Enhance Pointer Precision, also known as mouse acceleration. Disable the Sticky Keys keyboard shortcut. Disable Storage Sense automatic disk cleanup. Disable fast start-up to ensure a full shutdown. ...and more. Once you’ve downloaded the Win11Debloat file (Get.ps1), just follow these quick steps: Locate the Get.ps1 script file. Right-click the file and select Run with PowerShell from the context menu. If prompted by User Account Control (UAC), select Yes to grant the script the necessary administrative permissions. Win11Debloat 2026.06.14 changes: This is a minor release that hopefully addresses the false positives in Windows Defender and Bitdefender that prevented users from downloading and/or running Win11Debloat. Refactor Get-RegFileOperations.ps1 to address false positives by @Raphire in #626 Add logging around WinGet app retrieval and increase timeout to 20s by @Raphire Download: Win11Debloat 2026.06.14 | Open Source View: Win11Debloat Home Page | Screenshots 1| 2 Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Still using Microsoft Money 2005 in 2026 here!
    • I have a couple to mention, and they still run great on Windows 11 Adobe Lightroom Version 2 Alcohol 120% CLZ Book, Comic, Game, Movie, & Music Collector (PC - No longer sold / Grandfathered in - now mobile apps/online only) DVDDecrypter ISO Buster Pro version 1.9.1 (Still supports HD-DVD too) Nero Burning Rom 8 (Only the burning software, no backup, media converter, etc)   OpenAL (Runtime) - GuildWars 1 Reforged still uses it for 3d headphone audio PowerDVD 12 Ultra SPTD (SCSI Pass through Direct Driver) UltraISO Windows Media Encoder 9 WinImage You can tell I still sport an optical drive    
    • Linux 7.1 arrives with an NTFS overhaul and major hardware performance boosts by Paul Hill The founder of the Linux kernel has just announced the availability of Linux 7.1. This is a stable version of the kernel that will now be tested by various Linux distributions before it is shipped to users through update managers. Some users, like those on Debian, for example, might not get it for a long time, if at all, while Fedora users can expect it in the near future. With Linux 7.1 out on time, the merge window for Linux 7.2 is now open, giving contributors the opportunity to send in major new features that have been waiting for the last two months. Torvalds warned that he is currently travelling and will be in another timezone, so timing for the merge window may be irregular due to timezone differences and limited internet access. Torvalds said that he has already fetched early pull requests to allow him to do some offline work, but the travel could still cause disruption. Right now, he is not planning to extend the release, but did consider it. He said he might later regret not extending, though. In terms of this last week of development for Linux 7.1, Torvalds said there were no major or alarming changes. This week consisted mostly of smaller driver updates to GPU, networking, and sound, networking fixes, trace tooling fixes, and misc minor fixes. The shortlog this week lists fixes for driver bugs, memory leaks, I/O and USB fixes, networking and RDMA fixes, DRM/graphics fixes, and tooling and verification improvements. Specific fixes include USB series heap-overflow and buffer overflow fixes, and multiple use-after-free, memory-leak, and refcount corrections across subsystems such as i2c, zram, gpio, and net. There are fixes for graphics drivers, including amdgpu, i915, and virtio, as well as hypervisor and virtualization tweaks affecting mshv, vmbus, and hyperv. According to Phoronix, anyone running Linux 7.1 should look out for the new NTFS driver, Intel FRED for improved performance on Panther Lake and future CPUs, faster graphics with Intel Arc Battlemage, and improvements for older AMD Radeon GPUs. If you are running Linux on your computer and everything is fine, then you don’t need to worry about updating to Linux 7.1 as a priority; just wait for it to be pushed to you. If you have tried Linux on hardware but it didn’t work properly, trying again with a distro that uses Linux 7.1 could cause Linux to work on your machine, thanks to the new hardware support.
    • you can also do this with this tool: PowerSettingsExplorer made by mbk1969 at 3dguru forum.. I found it by accident researching on modern standby and annoying quirks of it in 2022
  • Recent Achievements

    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
    • One Month Later
      agatameier earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      507
    2. 2
      +Edouard
      197
    3. 3
      PsYcHoKiLLa
      139
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      81
  • Tell a friend

    Love Neowin? Tell a friend!