The ONLY Windows XP Installation Guide You'll Ever Need


Recommended Posts

Below is a short and sweet version for backing up, formatting, and then installing Windows XP.

1) Have a backup source DIFFERENT from your primary hard drive*(see note at bottom of guide). This means: a DVD burner, an external hard drive, a networked computer/server, a USB key, etc.)

2) Backup all essential documents/information (i.e. reports, pictures, music, etc.) to that backup source

3) Download all updated drivers for your computer components. This means: motherboard, graphics card, sound card, etc. Also, download (if available) an updated antivirus definitions file and store it away for after the reinstallation.

4) Make a list of all programs that you would need to reinstall once formatting/installing windows has been completed. PRINT THAT LIST!

5) Download and/or set aside all installers for the programs on your list (plus all relevant serial numbers/activation codes)

6) Download RyanVM's Windows XP Post-SP2 Update Pack , and integrate the file into your windows installer cd using the integrator program found on that same page. A nice tutorial on how to integrate the file is also on the page. This will integrate all Post-SP2 updates on your windows installer cd so that you won't have to spend time after reinstallation downloading updates from microsoft (note: your cd must already have sp-2 integrated ... if not, you can download sp2 from microsoft, and then integrate it yourself ... ask if that's the case)

7) Burn that new windows cd

***8) Download and place in your backup drive Autopatcher. This program has all of the OTHER windows updates that you may need after reinstall. Very handy.***

Autopatcher has since been discontinued, and is only up-to-date till August 2007.

9) Double- and triple-check that you have backed up everything that you should, then CHECK AGAIN!

10) Calm-down because the above steps are the hardest parts

11) Put in new windows cd and then disconnect all network cables/wireless cards

12) Restart

13) Boot from cd

14) Follow prompts - delete old partition. Make new partition(s) using the "quick ntfs" option. I recommend completing whatever partitioning you need done at this point BEFORE Windows is installed. (If you need a further explanation on what are the advantages/disadvantages of partitioning, please see the * towards the bottom of the post or see this link for more information.) Your Windows CD load a series of files, and it will automatically restart your computer.

15) Fill in all information Microsoft asks for ...

IF YOU NEED A GUIDE ON STEPS 11-15, PLEASE FOLLOW THIS LINK!

16) On first boot up after reinstall, reinstall all antivirus, firewall, and antispyware applications. Be sure to restart when needed. Also, load the updated antivirus definitions you downloaded before you reinstalled Windows.

17) Install Autopatcher and install any updates missing from windows cd

18) Reconnect all network cables and reinstall internet service ... immediately update your antivirus definitions.

19) Activate windows over the internet using on-screen prompts

20) Reinstall all programs from list (hopefully in some sort of order), restarting when necessary. Change all necessary Windows and program settings to how you prefer them.

ADDENDUM (9/11/07)

If you have followed the above guide to the letter, then you should have had a relatively short and stress-free experience reinstalling Windows XP. At this point in time, I would recommend completing one of the following actions:

1) Creating a disk image of your new installation. A disk image is an exact copy your hard drive that you may store as a file. By having an exact copy of your hard drive at this point, you may easily reload this file at any time in order to have a fresh installation of Windows ready to go with your drivers and programs preinstalled and all of your settings configured. Some software that I recommend for disk imaging are: Norton Ghost, Acronis True Image, or a free Linux System Rescue CD. Another link you may want to read is this one.

or

2) If you don't want to create disk image (or don't feel comfortable with the idea) you can create a different type of Windows installation cd/dvd with nLite. Not only can you slipstream Microsoft's updates into your installation disk, but it has the following:

"Features

* Service Pack Integration

* Component Removal

* Unattended Setup

* Driver Integration *

* Hotfixes Integration **

* Tweaks

* Services Configuration

* Patches ***

* Bootable ISO creation

* Program Integration"

With a Windows disk created with nLite you would be able to just insert the disk, reboot, and then walk away ... coming back to a fresh, fully-updated Windows installation. If you need help or have additional questions about nLite, please visit their FAQ.

21) Reload all information/documents from your backup drive onto your main computer drive, and then ...

YOU'RE DONE!!!

Much of the information I've provided above should be evident to most anyone who has SOME computer knowledge. Some are just tips I've found useful when formatting and reinstalling XP myself. If you have any questions, please ask.

Have fun! :D

*While I do not recommend doing so, it is possible to complete the above guide using just your original hard drive. You can "partition" (split into parts) your hard drive so that it is recognized by Windows as different hard drives. An advantage to having multiple partitions would be that you can have separate partitions for documents, programs, Windows itself, etc. CAUTION: If you are going to try this method, you should definitely BACKUP EVERYTHING before you try to partition.

There are numerous programs that you can use to partition your hard drive ... I typically suggest a commercial program like Partition Magic for this type of situation. Other solutions that I recommend are GParted or many Linux live cds (which are all free), but the most important item I can relay is to

BACKUP EVERYTHING BEFORE YOU TRY PARTITIONING!!!

Edited by koftheworld
  • 1 month later...

Hello!

Having posted the above about two months ago, I was wondering if anyone had any comments/criticisms of my steps? Also, how many of you found it helpful; if so, any comments to why as opposed to another guide?

Thank you in advance for your input!

  • 2 weeks later...

2 questions:

1) Are you trying to dual-boot Vista and XP, or

2) Are you trying to format your hd, and then install XP?

Also, it seems as if the cd you are using is not bootable or your cd/dvd drive isn't set in a boot priority slot above that of your hd. As far as the 1st case, even if Vista is installed you would still be able to boot to cd if it is in fact bootable. For the second case, go into your bios and change the boot priority settings so that your cd/dvd drive is above that of your harddrive.

Let me know! :)

  • 3 weeks later...
  • 3 weeks later...

Ok, it's been 5 months since I originally posted the guide. Unfortunately, no one has come up with any comments/concerns. Does this mean that nothing should be tweaked, or does everybody have no fingers?

Even though XP is not the newest OS out now, I'd still like my guide to be as good as possible.

Autopatcher is still a viable piece of software. Unless a moderator suggests that I remove the reference, it will stay. Even so, you make a valuable point. It is only valid up until its last release (August 2007). I will make a note for users of the guide. Thank you for the comment! :)

  • 3 weeks later...
  • 1 month later...
  • 1 month later...

I really would make a guide for Vista, but I don't own it! My computer really isn't that great, but when I do finally upgrade (after my wedding hopefully) I will be sure to put something similar together for Neowin.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Hello, Christian Maas' XVI32 is a nice (and very small) hex editor. Speaking of hex editors, many years ago a colleague and I who both worked at Tribal Voice managed to edit a copy of the company's PowWow instant messaging client to make it behave better now that all of its lookup servers and other server-side tech was gone.  The program didn't support NAT (RFC-3022 was introduced in January 2001, the same time Tribal Voice was shuttered), but it still worked okay if you manually set up port-forwarding on your router.  The server at http://powwow.jazy.net/ hosts a copy (usual warnings about downloading and running untrusted code from random internet servers apply). I occasionally use some tools like Funduc Software's Search and Replace and Application Mover when I need to make mass-edits to text-based files or move programs with a hard-coded installation directories, respectively.  When I need to figure out the exact LCD panel inside of a laptop, EnTech Taiwan's Monitor Asset Manager is my go-to tool for that purpose. JD Design's website (now hosted on github.io) has a number of interesting freeware and shareware utilities.  I used to use their TouchPro utility to set the file timestamps on software I was mastering to match its version number (e.g., version 3.00 of a program had all of its files dates set to 3:00AM, and so forth). Karenware has a number of interesting freeware utilities, too. Regards, Aryeh Goretsky  
    • I still use HexChat! Not really as ancient as the 1994 AutoCAD above my post, but I have never found anything better to replace it. Yes we still operate an IRC server https://www.neowin.net/irc/ 😛 
    • At work we still have a couple of people that use a version of AutoCAD LT purchased in 1994. This predates Windows 95 and works fine on versions of Windows up to XP. Its long since run in an locked down isolated XP VM, accessible via RDP. I did install LibreCAD for them, however they said it was just too different to get to grips with. In all fairness one of them is now 75 and the other is almost 60.
    • On my music making (non internet) PC Sony Acid Pro 7.0 Adobe Audition 2015 Korg Legacy Collection Windows 7 SP1
    • Anyway to download these versions without being on the Experimental builds?
  • Recent Achievements

    • Week One Done
      Jeroen Wilms earned a badge
      Week One Done
    • Week One Done
      rolfus earned a badge
      Week One Done
    • One Month Later
      Leroy Jethro Gibbs earned a badge
      One Month Later
    • Conversation Starter
      flexorcist earned a badge
      Conversation Starter
    • One Month Later
      AndreaB earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      +Edouard
      198
    3. 3
      PsYcHoKiLLa
      138
    4. 4
      ATLien_0
      90
    5. 5
      Steven P.
      82
  • Tell a friend

    Love Neowin? Tell a friend!