Recommended Posts

I managed to everything but File Operations (foo_fileops v2.0).

It come with foobar 0.9.5 beta. you don't need it to use this config.

VS? Visual settings?

It's window theme.

I don't know how to manually turn on ClearType.

Right click at desktop > properties > Appearance > Effects > tick at "Use the following method to smooth edge..." and choose "ClearType"

---------------

After more further investigate. I finally found that "Object Dock" is cause CPU spike i mentioned earlier. :(

Heya

Recently been playing around with the config again, found out that foo_uie_vis_channel_spectrum.dll was causing spikes in CPU usage when that panel was active. (was spiking above 20% CPU usage, while when any other panel was active the usage was <2% or when minimized it was pretty much 0% consistently).

Confirmed this by removing the component, CPU is much, much lower and more consistent. It was a nice eye-candy feature but definitely not mission-critical.

Cheers

Anybody know of a way to either replace something like the playlist tree with foo_uie_explorer, or just add it right in?

that's odd, it's stable at 0 and never goes above 2. only when viewing .lrc lyrics it reaches 6. are you using vista? I remember CPU going higher when I was on Vista.

Anybody know of a way to either replace something like the playlist tree with foo_uie_explorer, or just add it right in?

You mean, replace "album list" with something else? try these step.

1. right click at titlebar (the one that show playlist name,search button,etc) > setting

2. copy all the code (Alt+a) to 2 notepad. one is for backup in case of something go wrong.

3. use "replace" tool (edit > replace in notepad) in "find what" type "Album list" (case sensitive).

4. go back to panel ui setting, look for the "panel" button at the top of setting window, Hit it and click the drop down box below. list of panel name should show up. look for the name of panel you want to use. for example "quick search toolbar" will show up like "Toolbars / Quick Search Toolbar".

5. copy ONLY the name of panel. in this case, "Toolbars / Quick Search Toolbar" (also case sensitive) and paste in "replace with" in notepad that you edit. make sure there is no leading/trialling space in the word.

6. IMPORTANT check "match case" box and hit "replace all" and copy the code and paste it over the one in panel ui setting and OK to exit.

7. go to FooAvA popup setting. and check that you use "album list" in the setting2 page

8. check the panel if it work correctly or not. if so, you done. if it go haywire. don't sweat, just copy back the backup code and it should return like before. but it should work.

Heya

Recently been playing around with the config again, found out that foo_uie_vis_channel_spectrum.dll was causing spikes in CPU usage when that panel was active. (was spiking above 20% CPU usage, while when any other panel was active the usage was <2% or when minimized it was pretty much 0% consistently).

Confirmed this by removing the component, CPU is much, much lower and more consistent. It was a nice eye-candy feature but definitely not mission-critical.

Cheers

I suggest you try using the component and set transparent option off just for testing (by right click at sprectrum > config..) and see if the problem is gone,reduce or not. if it is, there is a way to fix it to use transparent mode with no cpu spike. if not, there maybe a conflict with another program. try shutdown your background program and see if it help or not. (I used to have it with object dock. right now it's no more than 2% with my aging PC)

How I can change that "default" text

If you mean changing only "playlist name" font. it's quite complicated since you have to manually edit the code in specific place.

and why I can't see the albums like u guys do, like album name year etc.. I just see the songs like..

Tried changing your sort / group type (right click playlist > sort / group by) and change playlist back and forth. tried the one that have "album" in it.

and if it's possible disable the scrollbar how I can do that? ;P

The "arrow" button above volume bar should do the trick.

Thanks BKT alot, put I didn't mean the font just the text like "default" to "music" or something... :) btw, how the f I will get that quicksearch thing workin, I can't search anything hmm... :I and is there a way to fix this problem now when I disabled the scrollbar the text goes to close the edge on rightside -> foo2kbw5.jpg

does it work with logitech setpoint?

i've been a winamp user at all times, but now i might consider switching

yes it does! you just have to assign the shortcuts on foobar's keyboard settings and on SetPoint. I use it for my G7 mouse.

put I didn't mean the font just the text like "default" to "music" or something...

It is playlist name. you can change it by hiting the " P " button at bottom of the screen to change to playlist switcher view (if it doesn't, it mean that you don't have column ui installed) double click at playlist or using context menu to change name.

btw, how the f I will get that quicksearch thing workin, I can't search anything hmm... :I

Did you have quicksearch installed? if not, go get it here.

and is there a way to fix this problem now when I disabled the scrollbar the text goes to close the edge on rightside ->

Strange.. it doesn't happen here. but i will give you a quickfix.

right click at playlist > setting

check the "Layout" box so that it's say "album" then, click at "Item Display" button.

Scroll down to the last line that doesn't have // in front of them, navigate to the end of the line (should have something like this > $if(%isplaying%,%playback_time%,%length%) ) and add space to the end of the line (just hit the spacebar ;) ). click apply and see if it's fix. adjust amount of space to suit your liking.

EDIT : ah... didn't see that it's happen the whole line.. this is strange.. maybe you can copy&paste the code from both group and item display and i will have a look at it.

Edited by BKT

Thanks got many things workin again, but but... that space addin thang is only doing it for the length of the song, but not how many tracks there are example "2 Tracks" and genre "Hip-Hop" those things are still over the edge...

EDIT: and when I search something and it founds it and then I go back to my playlist the scrollbar is back again, any fix for this?

Yes.. i just see it. sorry.

I can give you how to edit the code but the problem seem strange since it work fine here without have to edit it. both scroll hide and problem you mention. so this "workaround" might not be a good idea.

can you tried a "fresh" new install of FooAvA? do this by install FooAvA at some place else (desktop is a good idea) installer will create folder name "panelsUI" in there is a folder name "FooAvA" change name of this folder to something and move them in to "panelsUI" folder where you have installed foobar. and change the layout in preference > panel ui and see if it help?

not work? last solution here to find the problem that i can think. is install another foobar in a new location, install FooAvA there, and copy only Panel Ui component to the component directory. and test that the problem is solve. if so, it's mean there something wrong with your original setup.

if not, well.. here is the ugly solution.

Same thing as before, but instead of "Item display" go "Group display" instead find this line

$drawrect($get(xoffset),31,$eval(%_width% - $get(xoffset) - 5),1,$ifequal($getpvar(blue),1,brushcolor-0-0-0 pencolor-0-200-255,brushcolor-0-0-0 pencolor-255-50-50))

increase the value will make the "line" shorter. if it not get shorter. there is something wrong with your setup.

and find the line

$alignabs($get(xoffset),32,$eval(%_width% - $get(xoffset) - 5),13,right,middle)

%genre%*ADD SPACE HERE*

you can edit the value, or add space behind %genre% it's up to you.

and the 2 last line

$alignabs($get(xoffset),18,$eval(%_width% - $get(xoffset) - 5),13,right,middle)

%_itemcount%$font($get(fontAVA),$get(fontAVAsize_2),glow-20-20-20glowexpand-0 glowalpha-70,210-210-210) TRACK$ifgreater(%_itemcount%,1,S,)*ADD SPACE HERE*],

same as above.

I don't know why the scrollbar are acting like you describe. can't help you here, sorry. :(

Edited by BKT

OK thanks I got it working now, yeah thats sad thing that scrollbar does it act same with u if u use this cfg? One thing hmm when I start playing a song it starts count the time and it goes over the edge again if u know what I mean, where I can find that line?

EDIT: lol creepy, I deleted every items from my playlist and started again then everything was fine, scrollbar doesn't phuck with me either anymore :p thanks alot BKT u've been very helpful! One more thing again! Do u know how hard it wud be if there is a way to add how many items u have in your playlist somewhere?

EDIT EDIT: is there any chance to get Foobar2k like programs recognize it as Winamp?

And how that shorcut thing with SetPoint really gon work I tried to do something but didn't find anything lol... :I

EDIT: nono it doesn't work lol, when it needs the scrollbar it's fckd up again... :I same issue

Edited by eNeon

I'm glad that your problem are somehow solve :rolleyes:

Do u know how hard it wud be if there is a way to add how many items u have in your playlist somewhere?

it's depend on where you want them to be.

If you want them in playlist switcher. that's easy, Just go preference > Column Ui > playlist switcher > in general tab. check "use title format for playlist title in panel" and put in some code. here the basic one.

%title%

$tab()

%size% items

%size% will show how many item in the playlist.

but if you are talking about showing how many item in active playlist somewhere in your main layout. it's not hard to get the number. all you need is foo_cwb_hook component (which you might already have) and the command is %cwb_activelist_count% This will give you the number of how many track in active playlist which you can place anywhere in your layout. you can even use it in playlist. tried paste it behind %date% or %title% to see what i mean.

The hard part is that, Where, When and How it will show. this part is quite tricky.

Yes I ment in main layout, hmm yapp ;I somehow this is so hard ;< FOOBARRR damn it!

I won't worry anything else nooow but this scrollbar thing if I can get it fixed somehow it will be good for me! :I need to start crackin this shhh down.

Edited by eNeon

dawxxx666 i'm having issues with my foobar :(

I was using your 1.03 version, with the x.x.x.3 foobar and dragged and dropped all the plugins you said into where they're supposed to go, I shut foobar down, installed x.x.x.5, installed your 1.03+ exe to the appropriate folder, and restarted foobar. It runs fine, for a while, but now all it does is just crash all the darn time! I've tried turning off certain settings in the fooava preferences, but it hasn't helped.

also on 1.03 foobar would crash when I shut it down

First of all, a big THANK YOU for your config. It works well.

But I've two questions :

- Is it normal that I can't minimise my foobar to my traybar ? It don't even appear in the tray too (whereas I've ticked the "minimise to tray" and "always show tray icon").

- Do you know where the lyrics files are downloaded ? I searched in my music files, in foobar files, but nothing :(

Hi!

I would like to know if it's possible to solve a little problem i've.

When an album is an artist compilation in the list i get the album title from the first song artist TITLE, and would like to get, for instance, "Various" or "Mix".

So, i would like to know if there's a solution to that problem?

Thanks,

magnastik

I was using your 1.03 version, with the x.x.x.3 foobar and dragged and dropped all the plugins you said into where they're supposed to go, I shut foobar down, installed x.x.x.5, installed your 1.03+ exe to the appropriate folder, and restarted foobar. It runs fine, for a while, but now all it does is just crash all the darn time! I've tried turning off certain settings in the fooava preferences, but it hasn't helped.

If you are not using fooAVA, does it crash? Panel UI have some stability issue with some machine as far as I know.

- Is it normal that I can't minimise my foobar to my traybar ? It don't even appear in the tray too (whereas I've ticked the "minimise to tray" and "always show tray icon").

It's not normal. But I can't help you cause it's work fine here.

- Do you know where the lyrics files are downloaded ? I searched in my music files, in foobar files, but nothing

Normally, It should write to file tag.

When an album is an artist compilation in the list i get the album title from the first song artist TITLE, and would like to get, for instance, "Various" or "Mix".

This is what "Album Artist" tag is for. Just tag your compilation album with something you want to show, like "Various" or "Mix" in "Album Artist" field.(using properties window) AND leave your ARTIST tag like before. (The artist of that track is in this field.)

First of all, really nice work dawxxx666! I love the design and I thank you for sharing this great skin! :)

This skin made me switch from wmp to foobar, but I'm a total noob at foobar. After following the guide to install it I could get it to look like you other guys have. After 3 clean reinstalls and tries I only get it to look like this:

my.php?image=fooavascrnshotmq5.jpg

The track list doesn't look at all like yours, and I've tried ticking every setting in your settings 1 and 2. How can I solve this?

EDIT: Don't know why my image doesn't appear so I'll post a link to my screenshot: http://img139.imageshack.us/my.php?image=f...scrnshotmq5.jpg

Edited by Marfere
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Age of Empires Mobile comes to PC, here's how to carry over progress from your phone by Ivan Jenic Image: YouTube/Microsoft Microsoft just released Age of Empires Mobile for PC. The game, officially called Age of Empires Mobile: PC Edition, is available for free on Steam and Microsoft Store, almost two years after its initial release for handheld devices. Age of Empires is one of those franchises that entire generations grew up with. The original came out in 1997, and immediately got people hooked to building civilizations and crushing their enemies on the battlefield. However, the franchise today is a far cry from its roots, as Age of Empires Mobile is, well, a game optimized for handheld devices, and not a classic RTS title we’ve all loved for years. And, of course, it includes in-game purchases. The PC version is still a mobile game at its core, but it’s been optimized for desktop play. There’s mouse control, full keyboard compatibility, and a refined UI. Microsoft also refreshed the visuals with some 4k textures, so the game should look better on larger screens. The game supports Crossplay, so you can switch between your phone, tablet, and PC without losing anything. But linked progress doesn’t come out of the box, as you have to enable it first. Here’s how to link your progress: On your mobile device, open Age of Empires Mobile. Go to Settings (Gear icon) > Account. Select Bind Account and choose a sign-in option. Once you enable account binding, sign in on PC using the same method, and your progress will be accessible across all your devices. Xbox Game Pass subscribers also get a bonus reward pack on PC, which includes: 1 Monthly Pass Token 1 Custom Resource Chest 10 Universal 60-Minute Speed-Ups 1,000 Empire Coins Exclusive Player Portrait Frame You can find more info about Age of Empires Mobile: PC Edition, as well as download links, on the Age of Empires official website.
    • Apple Watch Series 11 GPS just crashed to 30% off in this fast-moving Prime Day deal by Karthik Mudaliar The Apple Watch Series 11 is available for $279, down from its $399 list price, saving buyers $120, or 30%. Amazon labels the offer as selling fast, so the current price may not remain available for long. This GPS model features a 42mm aluminum case, an Always-On Retina LTPO3 OLED display capable of reaching up to 2,000 nits, and an Ion-X glass surface with improved scratch resistance. Apple rates Series 11 for up to 24 hours of normal use or up to 38 hours in Low Power Mode, with fast charging providing up to eight hours of use from a 15-minute charge. Health and fitness tools include sleep scoring, temperature sensing, ECG support, heart-rate alerts, workout tracking, sleep apnea notifications, and hypertension notifications, where available. The watch also carries IP6X dust resistance and 50-meter water resistance. This configuration is best suited to iPhone owners who want comprehensive health tracking, notifications, contactless payments, and workout data without stepping up to a larger or cellular-equipped model. The smaller case should also appeal to buyers who prefer a lighter watch, while the S/M band fits wrists measuring 130mm to 180mm. With the current generation now significantly below its usual retail price, this is a strong time to replace an aging Apple Watch or buy a first model without compromising on Apple’s newest health and display features. Grab the discounted Apple Watch Series 11 (sold and shipped by Amazon) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • The laptop in the bedroom is an Acer with i7-10510U CPU. Acer's website states they will not be upgrading it so I had little choice other than disable secure boot. I know next to nothing on these matters so hopefully it will be fine.
    • GitHub removes manual model selection from Copilot free and student plans by Karthik Mudaliar GitHub is removing the ability to manually select an AI model from its Copilot Free and Student plans, making its automatic routing system the default and only way to choose a model. This means users on these tiers will no longer be able to deliberately select a particular OpenAI, Anthropic, Google, or Microsoft model for a task. In its announcement, GitHub said Copilot Auto will dynamically choose what it considers the best model for each request. Free and Student accounts will retain access to models from multiple families, although the available selection will continue to depend on the restrictions attached to each plan. GitHub did not identify a fixed pool of models that Auto will always use, and its documentation warns that model availability can change over time. GitHub describes Auto as more than a random fallback system. On supported surfaces, its task-optimization technology evaluates the complexity of a request alongside real-time information about model health and availability. Straightforward prompts can be routed to faster and less expensive models, while more demanding coding tasks may be sent to higher-cost reasoning models. The company says this approach should reduce rate limiting, latency, and failed requests. Auto generally selects one model along natural prompt-caching boundaries rather than repeatedly switching models during a session, as GitHub found that mid-session changes increased costs without producing sufficient improvements in output quality. Users can still check which model generated a response. In Copilot Chat, the information appears when hovering over an answer, while Copilot CLI and the Copilot cloud agent display the selected model alongside their output. Auto is available in Copilot Chat, Copilot CLI, and the cloud agent, with the exact implementation and release status varying between supported development environments. The latest restriction follows several months of adjustments to Copilot’s individual plans. GitHub temporarily halted new Pro, Pro+, and Student subscriptions in April as it sought to manage demand and service reliability. It later introduced token-based billing and began gradually reopening individual-plan registrations on June 17. Alongside the picker change, GitHub is retiring the “Preview” label from Microsoft-developed models. It argues that the label is no longer necessary because Auto handles model routing and models are continuously updated behind the scenes.
  • Recent Achievements

    • One Year In
      Philsl earned a badge
      One Year In
    • Dedicated
      Scoobystu earned a badge
      Dedicated
    • First Post
      Tom Schmidt earned a badge
      First Post
    • One Month Later
      D0nn13 earned a badge
      One Month Later
    • Rookie
      +ChiefOfNeo went up a rank
      Rookie
  • Popular Contributors

    1. 1
      +primortal
      460
    2. 2
      +Edouard
      177
    3. 3
      PsYcHoKiLLa
      124
    4. 4
      Michael Scrip
      79
    5. 5
      Xenon
      76
  • Tell a friend

    Love Neowin? Tell a friend!