J.J. Abrams' Cloverfield Questions


Recommended Posts

why was my post sniped? wtf?

He snipped it so the picture didn't load.

I see Movieweb posted a video yesterday of the actual monster and the video last all of 10 odd minutes until it went.

Has there been one review for this film yet? It's almost a week away.

Yeah AICN reviewed it about a month ago

Razorwing - There is no link thats the point Paramount removed it in under 10 minutes.

rappy, got any slurpo pics for this one ? :p

Nope havent seen any, I bet when the film is released the next day the monster will be released in a promo

Major Details about the creation of the Monster!

Reeves also skillfully interweaves an important storyline throughout the film, that of Rob and Beth’s (Odette Yustman) earlier relationship. Hud is unknowingly taping over an earlier recording Rob had made with the camera of intimate, quiet time spent with his mate. “You see their loving gaze. It’s this small love story,” says Reeves.

“So I began thinking, ‘Isn’t there some way to make that kind of a parallel story?’” The film actually begins with some of this footage – much of it shot by Michael Stahl-David himself using a small video camera. But additional portions also appear interspersed throughout the movie, typically after some shocking event has caused Hud to briefly shut off the camera, allowing a brief portion of Rob’s original recording to play for the audience before Hud picks up the current action again.

“We’re seeing the aftermath of two people who have longed to be together, and somehow finally come together, crosscut with this other event,” the director explains. “By going back and forth between these two pieces, you end up heightening the drama. By looking back at this relationship and what it could have been, the audience starts to put the pieces together as to why Rob is so eager to rescue her.”

Building a Better Monster

The visual effects for “Cloverfield” were produced under the direction of visual effects supervisors Kevin Blank, Eric Leven of Tippett Studio and Michael Ellis of London-based Double Negative. Tippett created all the shots that include the monsters, while Double Negative was responsible for all of the other destruction and sequences which did not include the monster.

The concept for the monster (affectionately known simply as “Clover” in-house) is simple, says Abrams. “He’s a baby. He’s brand-new. He’s confused, disoriented and irritable. And he’s been down there in the water for thousands and thousands of years.”

And where is he from? “We don’t say – deliberately,” notes Goddard. “Our movie doesn’t have the scientist in the white lab coat who shows up and explains things like that. We don’t have that scene.”

Not only is the creature disoriented – he’s downright angry. “There are a bunch of smaller things – humans – that are annoying him and shooting at him like a swarm of bees,” observes Reeves. “None of these things are going to kill the monster, but they hurt it and it doesn’t understand. It’s this new environment that it finds frightening.”

For the monster’s design, Abrams engaged veteran creature designer Neville Page, who had just finished creating characters for James Cameron’s upcoming “Avatar” (and is currently working on Abrams’ “Star Trek”).

“So much has been done in so many different movies with large creatures that the trick was to find a way to create a unique character,” explains Abrams. The producer had first become familiar with Page’s work through the designer’s series of instructional DVDs for The Gnoman Workshop. “One of the things that struck me about Neville’s instructional videos was the way he approaches everything from a realistic point of view. He develops non-existing creatures, but can explain to you their physical makeup, musculature and skeletal structure.”

Adds producer Burk, “Neville was the first person we met with. And he’s amazing. He doesn’t just think about designing the creature, he thinks in terms of how it would walk, how it would breathe, what its skin would be like, how it lives – everything.”

Once Page’s designs were complete, it was up to Tippett Studio to implement and refine the monster for inclusion in the few – but crucial – shots in which he appears. “We did a test, where we inserted him into some background plate shot in downtown L.A.,” explains Leven. “We experimented with different looks, in terms of not only the creature itself, but how it would interact with the camera and with light.”

Another facet of the design was added at director Reeves’ suggestion. “I wanted him to have that sort of spooked feeling, the way, when a horse is spooked, you can see the white of its eyes along the bottom. And you see that when the military is firing on him, where he becomes completely agitated and confused.”

As part of a “post-birth ritual,” as Abrams describes it, the monster is seen early on scratching his back on a building (destroying it in the process), to remove a layer of parasites that are set loose to wreak their own havoc on the city.

“Drew and I were struggling with, ‘When you have a monster that size how do you keep the characters from seeming totally irrelevant?’” says Abrams. “How do you have any one-on-one struggle?” Explains Goddard, “Because he’s so big, we knew it was going to be difficult to have intimate sequences. It’s not like any of the characters could fight him or that anyone could even figure out a way to hurt him.”

And because of that, the idea of the parasites was born. “They’re these horrifying, dog-sized creatures that just scatter around the city and add to the nightmare of the evening,” Abrams says.

“The parasites have a voracious, rabid, bounding nature, but they also have a crab-like crawl,” Reeves explains. “They have the viciousness of a dog, but with the ability to climb walls and stick to things.”

In addition, the parasites also move more rapidly than their giant host counterpart. “Tippett Studio has a lot of expertise with these kinds of fast-moving creatures that can destroy people and rip them to shreds, which is always a lot of fun to work on,” says Leven. “They’re like little whirling dervishes that just destroy anything in their path. They’re totally deadly.

Edited by Rappy
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • But the reality is it will work for people's needs, and they don't care about the technology that makes it. Clearly not everyone's needs, but that low end space where personal laptops were only used to type emails, watch content and browse websites, but they didn't want to do that on a small screen device. Heck, writing that out I can now see the connection and reason it'll do so well. Apple is about experience. If the experience is bad, they don't release it. Low end Windows laptop manufacturers up until this point have not taken that into consideration ever before, so slow laggy usage with brittle slimey plastic shells were common. I hope that the low end space at least creates better physical products that last a bit longer, and if Microsoft get their act together, they could also have a solid OS on such low end hardware that would actually make the experience work for what the hardware was intended for. The fact that the CPU is a "cellphone", sorry mobile phone processor is irrelevant. It's about the experience, and so far, that sounds quite solid.
    • Hello, Bonjour is Apple's implementation of a multicast-DNS service, which allows devices running Apple's software and/or hardware to find each other on your local network.  I believe the Windows version was last updated around 2010. If you do not need it, you can stop and disable the Bonjour service in the Services Control Manager (filename: SERVICES.MSC).  Once you have done that, the operating system will no longer attempt to load the service. Regards, Aryeh Goretsky  
    • This AMD RX 9070 16GB GPU that performs close to Nvidia 5070 is under $600 by Sayan Sen With the memory shortage that's prevalent nowadays, discounts are super-hard to get. As such we post good deals whenever they pop up. Recently, we covered a few great discounts on SSDs wherein you can get a 4TB TeamGroup NVMe PCIe Gen4 drive for just $400 thanks to a special coupon. If you want a faster product but don't need all that capacity, you can also opt for Samsung's 990 PRO 2TB that is on sale for its lowest price in over three months. Let's say though that you are on the hunt for a 1440p gaming card. In that case AMD's RX 9070 non-XT can help, and with its 16GB VRAM, you can also run AI models locally without worrying about bottlenecking (check out our recent 9070 GRE reviews for gaming and productivity to get an idea). The PowerColor Reaper variant of the RX 9070 is currently on sale for just $580 which is a very good price in the current state of affairs (purchase link under the specs table down below). The Reaper cooler on this 9070 uses a triple‑fan design with ring‑blade fans, paired with premium dual ball bearings to extend lifespan and reduce friction. "Intelligent" fan control allows the fans to remain idle at lower temperatures, only spinning up when the GPU is under load. A nickel‑plated copper base makes direct contact with both the GPU and memory modules, helping to spread heat evenly. PowerColor also applies Honeywell PTM7950 phase‑change thermal interface material (TIM), which fills microscopic gaps between the die and heatsink for more efficient thermal transfer. The fan shroud is shorter in height as the firm has made it such that it can be used in certain SFF (small form factor) cases. The technical specifications of the Reaper RX 9070 are given in the table below: Specification Value Stream Processors 3584 Units Video Memory 16GB GDDR6 Memory Speed 20.0 Gbps Memory Interface 256-bit Engine Clock Game Clock: up to 2070 MHz Boost Clock: up to 2520 MHz Bus Standard PCI Express 5.0 x16 Display Connectors 1 x HDMI 2.1b, 3 x DisplayPort 2.1a Maximum Resolution DisplayPort: 7680 × 4320 HDMI: 7680 × 4320 Board Dimensions 289mm × 111mm × 41mm 304mm × 127mm × 42mm (with bracket) Slot 2 Minimum System Power Requirement 600W Power Connectors Two 8-pin PCI Express Get the PowerColor Reaper RX 9070 at the links below (you get only a 90-day warranty on Woot): PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $579.99 (Sold and Shipped by Amazon US) (Was: $700) PowerColor Reaper Radeon RX 9070 16GB Graphics Card (RX9070 16G-A): $559.99 (Sold and Shipped by Woot US) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links (at the time of article publishing); ensure that you purchase from a first-party seller link only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • Are they marketed as an entry into astronomy or astrophotography? I do astrophotography. With big rigs, lots of computers, cables and headaches. I love it. And by learning this ridiculously complex hobby, I’ve learned about the objects I’m shooting. Astronomy followed from photography.
    • Microsoft confirms Recycle Bin bug across all versions of Windows by Usama Jawad A couple of days ago, we reported that the latest Patch Tuesday update has seemingly resulted in a lot of issues for many users, including OneDrive and Dropbox access problems, BitLocker recovery lockouts, and BSODs. Although Microsoft is yet to acknowledge these bugs, it has confirmed another, relatively smaller issue across all supported versions of Windows. In an update on its Windows Release Health Dashboard, Microsoft has confirmed that after installing June's Patch Tuesday update (KB5094126), you'll experience unexpected behavior when leveraging Recycle Bin. Basically, when you attempt to delete an item from the Recycle Bin, the confirm dialog will show you the internal file name of that content rather than the actual name. For example, the file may be named abc.png, but the confirm dialog will ask if you're sure that you want to permanently delete $Rxxxxx.png from the Recycle Bin. This is pretty much it for the scope of the bug itself; it just displays the wrong name in the confirm dialog. The correct name will be shown in the list view of the Recycle Bin and if you restore the file, it will return with the correct name as well. This issue affects pretty much all supported versions of Windows client and server, including: Client: Windows 11, version 26H1; Windows 11, version 25H2; Windows 11, version 24H2; Windows 11, version 23H2; Windows 10, version 22H2; Windows 10 Enterprise LTSC 2021; Windows 10 Enterprise LTSC 2019; Windows 10 Enterprise LTSB 2016 Server: Windows Server 2025; Windows Server 2022; Windows Server 2019; Windows Server 2016; Windows Server 2012 R2; Windows Server 2012 As things currently stand, Microsoft is working on a concrete solution that will be released in a "future" Windows update. It remains to be seen if the firm will wait till the next Patch Tuesday or roll out an out-of-band (OOB) fix. The good news is that commercial customers can deploy a workaround right now, but they will have to reach out to Microsoft Support for Business for additional details.
  • Recent Achievements

    • Week One Done
      Jordan Smith earned a badge
      Week One Done
    • Reacting Well
      BizSAR earned a badge
      Reacting Well
    • First Post
      AndreaB earned a badge
      First Post
    • Week One Done
      Huge Trailer earned a badge
      Week One Done
    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      579
    2. 2
      +Edouard
      184
    3. 3
      PsYcHoKiLLa
      75
    4. 4
      Michael Scrip
      72
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!