J.J. Abrams' Cloverfield Questions


Recommended Posts

why was my post sniped? wtf?

He snipped it so the picture didn't load.

I see Movieweb posted a video yesterday of the actual monster and the video last all of 10 odd minutes until it went.

Has there been one review for this film yet? It's almost a week away.

Yeah AICN reviewed it about a month ago

Razorwing - There is no link thats the point Paramount removed it in under 10 minutes.

rappy, got any slurpo pics for this one ? :p

Nope havent seen any, I bet when the film is released the next day the monster will be released in a promo

Major Details about the creation of the Monster!

Reeves also skillfully interweaves an important storyline throughout the film, that of Rob and Beth’s (Odette Yustman) earlier relationship. Hud is unknowingly taping over an earlier recording Rob had made with the camera of intimate, quiet time spent with his mate. “You see their loving gaze. It’s this small love story,” says Reeves.

“So I began thinking, ‘Isn’t there some way to make that kind of a parallel story?’” The film actually begins with some of this footage – much of it shot by Michael Stahl-David himself using a small video camera. But additional portions also appear interspersed throughout the movie, typically after some shocking event has caused Hud to briefly shut off the camera, allowing a brief portion of Rob’s original recording to play for the audience before Hud picks up the current action again.

“We’re seeing the aftermath of two people who have longed to be together, and somehow finally come together, crosscut with this other event,” the director explains. “By going back and forth between these two pieces, you end up heightening the drama. By looking back at this relationship and what it could have been, the audience starts to put the pieces together as to why Rob is so eager to rescue her.”

Building a Better Monster

The visual effects for “Cloverfield” were produced under the direction of visual effects supervisors Kevin Blank, Eric Leven of Tippett Studio and Michael Ellis of London-based Double Negative. Tippett created all the shots that include the monsters, while Double Negative was responsible for all of the other destruction and sequences which did not include the monster.

The concept for the monster (affectionately known simply as “Clover” in-house) is simple, says Abrams. “He’s a baby. He’s brand-new. He’s confused, disoriented and irritable. And he’s been down there in the water for thousands and thousands of years.”

And where is he from? “We don’t say – deliberately,” notes Goddard. “Our movie doesn’t have the scientist in the white lab coat who shows up and explains things like that. We don’t have that scene.”

Not only is the creature disoriented – he’s downright angry. “There are a bunch of smaller things – humans – that are annoying him and shooting at him like a swarm of bees,” observes Reeves. “None of these things are going to kill the monster, but they hurt it and it doesn’t understand. It’s this new environment that it finds frightening.”

For the monster’s design, Abrams engaged veteran creature designer Neville Page, who had just finished creating characters for James Cameron’s upcoming “Avatar” (and is currently working on Abrams’ “Star Trek”).

“So much has been done in so many different movies with large creatures that the trick was to find a way to create a unique character,” explains Abrams. The producer had first become familiar with Page’s work through the designer’s series of instructional DVDs for The Gnoman Workshop. “One of the things that struck me about Neville’s instructional videos was the way he approaches everything from a realistic point of view. He develops non-existing creatures, but can explain to you their physical makeup, musculature and skeletal structure.”

Adds producer Burk, “Neville was the first person we met with. And he’s amazing. He doesn’t just think about designing the creature, he thinks in terms of how it would walk, how it would breathe, what its skin would be like, how it lives – everything.”

Once Page’s designs were complete, it was up to Tippett Studio to implement and refine the monster for inclusion in the few – but crucial – shots in which he appears. “We did a test, where we inserted him into some background plate shot in downtown L.A.,” explains Leven. “We experimented with different looks, in terms of not only the creature itself, but how it would interact with the camera and with light.”

Another facet of the design was added at director Reeves’ suggestion. “I wanted him to have that sort of spooked feeling, the way, when a horse is spooked, you can see the white of its eyes along the bottom. And you see that when the military is firing on him, where he becomes completely agitated and confused.”

As part of a “post-birth ritual,” as Abrams describes it, the monster is seen early on scratching his back on a building (destroying it in the process), to remove a layer of parasites that are set loose to wreak their own havoc on the city.

“Drew and I were struggling with, ‘When you have a monster that size how do you keep the characters from seeming totally irrelevant?’” says Abrams. “How do you have any one-on-one struggle?” Explains Goddard, “Because he’s so big, we knew it was going to be difficult to have intimate sequences. It’s not like any of the characters could fight him or that anyone could even figure out a way to hurt him.”

And because of that, the idea of the parasites was born. “They’re these horrifying, dog-sized creatures that just scatter around the city and add to the nightmare of the evening,” Abrams says.

“The parasites have a voracious, rabid, bounding nature, but they also have a crab-like crawl,” Reeves explains. “They have the viciousness of a dog, but with the ability to climb walls and stick to things.”

In addition, the parasites also move more rapidly than their giant host counterpart. “Tippett Studio has a lot of expertise with these kinds of fast-moving creatures that can destroy people and rip them to shreds, which is always a lot of fun to work on,” says Leven. “They’re like little whirling dervishes that just destroy anything in their path. They’re totally deadly.

Edited by Rappy
This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Couple years ago I got a brand new 4TB Samsung 990 Pro for $250 during Black Friday
    • Thanks
    • Can confirm, I've built stuff for others and no complaints using their products.
    • Yes I agree, it's annoying. You can now miss tabs unless you point low enough.
    • Sysinternals Suite 2026.17.06 by Razvan Serea The Sysinternals Suite is a comprehensive package of advanced Windows utilities created by Mark Russinovich, who launched the Sysinternals website in 1996 to share his system tools and technical resources. This suite combines a wide range of troubleshooting and diagnostic tools, including Process Explorer, Process Monitor, Sysmon, Autoruns, ProcDump, the PsTools collection, and many others. It provides everything IT professionals and developers need to manage, monitor, and troubleshoot Windows systems and applications. The Suite bundles all of the core troubleshooting utilities along with their help files. Non-troubleshooting extras—such as the BSOD Screen Saver or NotMyFault—are excluded. In addition to the well-known tools, it also includes AccessChk, Autologon, Ctrl2Cap, DiskView, Disk Usage (DU), LogonSessions, PageDefrag, PsLogList, PsPasswd, RegMon, RootkitRevealer, TCPView, VMMap, ZoomIt, and more. Sysinternals Suite 2026.17.06 changelog: Autoruns v14.3 - This update to Autoruns, a utility for monitoring startup items, adds bug fixes and improves the command-line application autorunsc. ZoomIt v12.1 - This update to ZoomIt, a screen magnification and annotation tool, adds image backgrounds, webcam background blur and microphone noise cancellation support. Coreinfo v4.01 - This update to Coreinfo, a tool that reports processor, socket, NUMA memory, and cache topology of a system, as well as processor features supported, adds support for new processor features. DebugView v5.02 - This update to DebugView, a tool for displaying both kernel-mode and Win32 debug output, adds Ctrl-Shift-A support for selecting all output, and agent skills support for the CLI utility. LiveKd v5.64 - This update to LiveKd, a utility that allows running the kernel debugger on a live system, fixes a debugging privileges issue. ProcDump 3.5.2 for Linux - This update to ProcDump for Linux, a tool for capturing process dumps, adds .NET counters and a custom core dumper. Process Monitor v4.04 - This update to Process Monitor, a utility for observing real-time file system, Registry, and process or thread activity, adds some bug fixes Sysmon v15.21 - This update to Sysmon, an advanced host security monitoring tool, adds some bug fixes. Download: Sysinternals Suite 2026.17.06 | 168.0 MB (Freeware) Download: Sysinternals Suite for ARM64 | 15.4 MB Link: Sysinternals Suite Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      Classifyskilleducation earned a badge
      Week One Done
    • One Month Later
      eurospharma62 earned a badge
      One Month Later
    • Week One Done
      With What earned a badge
      Week One Done
    • Week One Done
      Harris Gilbert earned a badge
      Week One Done
    • One Month Later
      Vincian earned a badge
      One Month Later
  • Popular Contributors

    1. 1
      +primortal
      542
    2. 2
      +Edouard
      169
    3. 3
      PsYcHoKiLLa
      85
    4. 4
      ATLien_0
      64
    5. 5
      neufuse
      64
  • Tell a friend

    Love Neowin? Tell a friend!