Recommended Posts

I'm tired of doing that some 10 or 12 times in a row only to have it still not connect. I'm on a compaq notebook and sometimes the wireless doesn't get a default gateway so it has limited connection. Is there anyway to get it to connect easier? I don't have this problem in windows vista too much so far. Usually maybe two or three times I might have to repair in Vista but usuallly not. In XP/2K3, I get that problem.

Link to comment
https://www.neowin.net/forum/topic/575475-tired-of-ipconfig-releaserenew/
Share on other sites

There is NO reason you should have to do anything.. Not getting a default gateway, or not getting a IP all together.. If your seeing an IP address of 169.254 -- that is RANDOM IP that windows gives it self when set for dhcp, but no dhcp server answers.

Creating a hot key to run the ipconfig /renew command or run a repair is NOT the direction you should be looking in.. You should be looking into why your dhcp server does not anwer, etc.

You should connect to your wireless network an get an IP the first freaking time, you should not have to repair or renew anything.

Why don't we fix the root cause of your issue vs finding some lame work around way for you to run /renew easier.

There is NO reason you should have to do anything.. Not getting a default gateway, or not getting a IP all together.. If your seeing an IP address of 169.254 -- that is RANDOM IP that windows gives it self when set for dhcp, but no dhcp server answers.

Creating a hot key to run the ipconfig /renew command or run a repair is NOT the direction you should be looking in.. You should be looking into why your dhcp server does not anwer, etc.

You should connect to your wireless network an get an IP the first freaking time, you should not have to repair or renew anything.

Why don't we fix the root cause of your issue vs finding some lame work around way for you to run /renew easier.

That's what I'm looking for Budman. Using windows repair is the same as manually doing the ipconfig route. I don't want a short cut to it. I want what you described Budman. So tell what I should do to fix the problem.

Well for starters lets get some details.. saying you don't get a default gateway is not much to go on.

I would assume your running dhcp off your router. no some other machine on your network. Lets start with some model numbers, firmware versions and driver versions of your hardware.

Do you loose network connectivity an then it comes back an you do not get an IP.. or is your connectivity fine an your lease just expires?

Please post the details of ipconfig /all -- this will give us lots of info - the make an model of your wireless card, the lease time, etc..

Your 100% sure your not connecting to some other wireless network?

A quick way to verify its a dhcp issue an not a wireless issue is to set a static IP on your wireless client -- if this makes the problem go away an you never have any connectivity issues - then its just dhcp related. If you still have issues connecting, then we are also having wireless issues. Which could be root of the problem.

I would also suggest you take note of your lease time.. note how much time you have left on the lease, when it expires do you loose your connection? ipconfig /all will show you your lease time, etc.

I am running a linksys WRT54G v3 with Tomato 1.07. My desktop wireless is running a linksys WMP54G (latest linksys driver) and my laptop is running an internal Broadcom BCM43XX (Something like that, I can't find an exact model number, it is a wireless-n draft, driver 4.102.15.56).

My problem is that when I try to connect to the network I just get assigned a 169.x address. Once I am connected and get a proper 192.168.x address I am fine until I disconnect manually.

Here is my ipconfig /all:

Microsoft Windows [Version 6.0.6000]
Copyright (c) 2006 Microsoft Corporation.  All rights reserved.

C:\Users\Kevin>ipconfig /all

Windows IP Configuration

   Host Name . . . . . . . . . . . . : Kevin-Laptop
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : hsd1.az.comcast.net

Ethernet adapter Bluetooth Network Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 00-16-CF-F5-22-6D
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . : hsd1.az.comcast.net
   Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter
   Physical Address. . . . . . . . . : 00-19-7E-23-49-A8
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::6416:76d5:af88:249b%9(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.0.30(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Friday, July 20, 2007 6:16:16 PM
   Lease Expires . . . . . . . . . . : Sunday, July 22, 2007 10:55:21 AM
   Default Gateway . . . . . . . . . : 192.168.0.1
   DHCP Server . . . . . . . . . . . : 192.168.0.1
   DHCPv6 IAID . . . . . . . . . . . : 151001470
   DNS Servers . . . . . . . . . . . : 192.168.0.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : hsd1.az.comcast.net
   Description . . . . . . . . . . . : Realtek RTL8139/810x Family Fast Ethernet
 NIC
   Physical Address. . . . . . . . . : 00-0F-B0-D3-3C-20
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 6:

   Connection-specific DNS Suffix  . : hsd1.az.comcast.net
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::5efe:192.168.0.30%14(Preferred)
   Default Gateway . . . . . . . . . :
   DNS Servers . . . . . . . . . . . : 192.168.0.1
   NetBIOS over Tcpip. . . . . . . . : Disabled

Tunnel adapter Local Area Connection* 10:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter Local Area Connection* 11:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
   Physical Address. . . . . . . . . : 02-00-54-55-4E-01
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : 2001:0:4136:e37a:10b9:2fd6:3f57:ffe1(Pref
erred)
   Link-local IPv6 Address . . . . . : fe80::10b9:2fd6:3f57:ffe1%13(Preferred)
   Default Gateway . . . . . . . . . : ::
   NetBIOS over Tcpip. . . . . . . . : Disabled

C:\Users\Kevin>

I have it set for a static DHCP on both the desktop and the laptop, but the problem only occurs on the laptop, and turning off DHCP and resetting everything doesn't help either. My lease time is 30 minutes, no relation to my error though.

I am also interested in what all of those tunneling adapters are... :unsure:

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : hsd1.az.comcast.net

Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter

Physical Address. . . . . . . . . : 00-19-7E-23-49-A8

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Link-local IPv6 Address . . . . . : fe80::6416:76d5:af88:249b%9(Preferred)

IPv4 Address. . . . . . . . . . . : 192.168.0.30(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Lease Obtained. . . . . . . . . . : Friday, July 20, 2007 6:16:16 PM

Lease Expires . . . . . . . . . . : Sunday, July 22, 2007 10:55:21 AM

Default Gateway . . . . . . . . . : 192.168.0.1

DHCP Server . . . . . . . . . . . : 192.168.0.1

DHCPv6 IAID . . . . . . . . . . . : 151001470

DNS Servers . . . . . . . . . . . : 192.168.0.1

NetBIOS over Tcpip. . . . . . . . : Enabled

You seem to be connecting to WLAN correctly. But I think you also have Microsoft IPv6 loaded in your protocol stack. If you are not using them, then remove them by going into Local Area Connection's property dialog box, select Microsoft TCP/IP version 6 and click Uninstall. Follow the dialog boxes. When done, repair your connection & see if that helps...

I don't have the option to uninstall it. My guess is that is because it is integrated into Windows Vista. :p But I disabled it, so we will see what happens now. Earlier today I didn't have any problems connecting, so hopefully it keeps up. :)

Even if the IPv6 is enable I think you should be able to communicate perfectly. There is an advance configuration from which you can assign IPv4 priority over IPv6. But I am not sure where it is located in Windows Vista (if it is).

Well, I have no need for it at the moment, so I will just leave it disabled and see if my issues clear up. You never know. I've had things that should have worked perfectly decide not to because they didn't like the day of the week... :p

This is my ipconfig /all....I'm not sure if the IvP6 thing is the ticket. I'm willing to give it a try. I stated that Vista seems to fix the problem but XP/2k3 seem to have problems with no default gateway. It takes numerous times of the old /release /renew to get it locked.

If your not using IPv6 then there is no reason to have it running.. an for sure there is NO reason to have it set as your preferred network..

Turn off IPv6 -- see if you still have issues.

http://www.microsoft.com/technet/community...guy/cg0506.mspx

Disabling IPv6

Unlike Windows XP, IPv6 in Windows Vista cannot be uninstalled. To disable IPv6 on a specific connection, you can do the following:

? Add the following registry value (DWORD type) set to 0xFF:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents

This method disables IPv6 on all your LAN interfaces, connections, and tunnel interfaces but does not disable the IPv6 loopback interface. You must restart the computer for this registry value to take effect.

So both IvP6 and DCHP are my problem? I'll follow thru witht the IvP6 thing, but the DCHP is I don't know what to do with. It just seem funny that Vista can over come the problem a good bit easier than XP/2k3 can, I mean eventually XP/2k3 will both finally get the connection if I leave it be.

IPv6 is sure not helping you in anyway.. look at it like that.

And could be at least part of the problem with getting a dhcp lease.

Disable it -- an see if your issue clears up. If not -- you could try running a different dhcp server. if you have 2k3 you already have a very robust dhcp server.. way more functionality than what your routers dhcp can do - yeah 3rd party firmware does provide for way more features on the dhcp than native.. But they still do not come close to the features of a full blown dhcp server install.

IPv6 is sure not helping you in anyway.. look at it like that.

And could be at least part of the problem with getting a dhcp lease.

Disable it -- an see if your issue clears up. If not -- you could try running a different dhcp server. if you have 2k3 you already have a very robust dhcp server.. way more functionality than what your routers dhcp can do - yeah 3rd party firmware does provide for way more features on the dhcp than native.. But they still do not come close to the features of a full blown dhcp server install.

I easily disabled the IvP (TC/IP) protocal along with other unecessary connections in Vista. It cleared up the problem. I'm going to disable it in XP/2k3 as well. Should hopefully do the trick. Thanks Budman, I'll post again once I've done it.

An where did you give the info requested in post #9. Other than 1 screen shot showing one of your machines - which had ipv6 as the preferred interface.

Did you try changing the machine to static? Have you looked at the lease times - does your connection die at renewal? Since your saying 2k3 is having an issue, its clear its not running dhcp.. I have never been really impressed with the dhcp servers included with the routers. Run a REAL one - shoot you have 2k3! It can run a full featured dhcp no problem!

Have you given us the make an model of your devices in question as far as nics, drivers? I did not see this info given.

An where did you give the info requested in post #9. Other than 1 screen shot showing one of your machines - which had ipv6 as the preferred interface.

Did you try changing the machine to static? Have you looked at the lease times - does your connection die at renewal? Since your saying 2k3 is having an issue, its clear its not running dhcp.. I have never been really impressed with the dhcp servers included with the routers. Run a REAL one - shoot you have 2k3! It can run a full featured dhcp no problem!

Have you given us the make an model of your devices in question as far as nics, drivers? I did not see this info given.

I'm running it as workstation. Not sure of how to do what you described. My nic is onboard, I can post that. I was hoping for something easy to fix the problem with though.

An if the problem is related to dhcp -- going to static would be a pretty F'ing easy solution now wouldn't it ;)

Yeah its real difficult to install dhcp -- just add the role.. It does not have clue one to what you think your using it as.. An I don't even want to get started on 2k3 as a workstation.. You have a SERVER OS, with all kinds of functionality -- an your using to what play games an watch porn :rolleyes: Let me guess it's the ENT version.. An you forked over $4k for it :rofl:

Turn off the dhcp server on your router - turn it on 2k3 machine.. Point to your router as the gateway in the dhcp settings..

For that matter -- you have a FULL dns server that could actually do some real caching, etc.. an your pointing to your router with what 8mb of ram as a caching name server..

Great to see your putting all the features of that server os to good use :rofl:

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Well, it's good to know that they have found a workaround to a problem that they helped create, I guess...
    • Meta is reusing old DDR4 RAM in its servers instead of buying new hardware by Ivan Jenic Image: Meta The global hardware shortage isn’t exactly news, as the entire world has been struggling with rising component prices for quite some time now. And while big companies certainly aren’t as affected as the average consumer, even they aren’t opposed to the idea of saving a few (million) bucks. Meta appears to have found a way to spend less on new hardware while also putting its outdated infrastructure to use, essentially killing two birds with one stone. The company has built a custom chip that lets it reuse memory from retired servers rather than buying new hardware. The chip is called Vistara and allows for connecting old DDR4 RAM from obsolete servers into new servers that rely on DDR5. The problem Vistara solves goes back to a basic mismatch in how long hardware lasts. Meta replaces its servers every three to five years, but the memory modules inside them are good for seven to ten. When a server gets decommissioned, perfectly usable DDR4 RAM goes with it. Meta is presenting the new method at today’s ISCA symposium, but The Register has got hold of a paper that explains how Vistara works. It's a custom ASIC that bridges DDR4 memory to newer processors via aCXL 2.0/1.1 interface over PCIe Gen5 x16. Meta pulls DDR4 sticks from old machines and installs them in dedicated units it calls MemServers, each of which pairs 768GB of DDR5 with 256GB of recovered DDR4. The operating system sees the DDR4 as an additional memory node and draws from it when the primary DDR5 is running low. Off-the-shelf CXL hardware couldn't do this, so Meta built its own. Existing interfaces bundle their own memory with the controller, which makes reusing old RAM sticks impossible. But Vistara separates the controller from the memory entirely, so Meta can plug in whatever DDR4 sticks it has on hand. Meta plans to deploy the new architecture in hyperscale infrastructure with millions of servers, which should mean that Meta’s AI datacenters will now be more efficient. The company is investing heavily in AI infrastructure, especially with its new AI model, Muse Spark, now widely available. All of this doesn't mean that Meta will exclusively rely on "recycled" RAM, but the company is still looking at considerable savings at scale.
    • Save up to 87% on ChatPlayground AI lifetime subscriptions by Steven Parker Today's highlighted deal comes via our Apps + Software section of the Neowin Deals store, where for only a limited time, you can save up to 87% on ChatPlayground AI: lifetime subscriptions. ChatPlayground AI puts the world’s top AI models in one powerful interface, letting you enter a single prompt and instantly compare outputs from multiple models to choose the perfect response for your needs. Boost productivity and creativity with access to the latest AI giants like GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, and dozens more — all in one window. Whether you’re chatting, coding, generating images, or refining prompts, ChatPlayground AI equips you with advanced tools like prompt engineering, image/PDF chat, saved conversations, and AI image creation, plus priority support to keep your workflow seamless. Access the world’s best AI models Side-by-Side Comparisons: Enter one prompt & instantly view results from multiple AI models to find the best output for your needs 40+ AI Models: Includes GPT-4o, Claude Sonnet 4, Gemini 1.5 Flash, DeepSeek V3, Llama, Perplexity, and many more Multi-Function Platform: Access AI for chat, image generation & coding all within a single interface Web Browser Extension: Offers a Chrome extension to seamlessly integrate the platform into your browsing workflow Boost productivity with powerful features ChatPlayground Interface: Designed for seamless AI model comparison in one window Prompt Engineering: Refine & optimize your prompts for better, more accurate responses Chat with Images & PDFs: Upload visuals and documents to get context-aware answers Saved Chat History: Keep track of past conversations for reference & ongoing projects AI Image Generation: Create high-quality visuals powered by top AI image models Priority Customer Support: Get faster assistance whenever you need it What you'll get with the Unlimited Plan Includes unlimited messages/month Built for prompt engineers, startups, and teams who run experiments nonstop Includes priority access to new features and future models Good to know Length of access: lifetime Redemption deadline: redeem your code within 30 days of purchase Access options: Desktop Max number of device(s): Unlimited Available to both NEW & Existing users Updates included A lifetime subscription to ChatPlayground AI (Unlimited Plan) normally costs $619, but you can pick it up for just $79 for a limited time - that represents a saving of $530 (87% off). Click the link below for more details, always check terms and specifications before making a purchase. Get this ChatPlayground AI (Unlimited) for $79 (was $619) There are also two other discounted plans to choose from. Although priced in U.S. dollars, this deal is available for digital purchase worldwide. Support queries If you have queries or need support for any of the Neowin Deals, please use the contact form here. Neowin Deals are managed and sold by StackCommerce who represent Neowin on an affiliate basis. Why we post these deals We post these because we earn commission on each sale so as not to rely solely on advertising, which many of our readers block. It all helps toward paying staff reporters, servers and hosting costs. So for those that keep moaning and complaining, be thankful we're still online for you to even do that. Other ways to support Neowin Whitelist Neowin by not blocking our ads Create a free member account to see fewer ads Make a donation to support our day to day running costs Subscribe to Neowin - for $14 a year, or $28 a year for an ad-free experience Disclosure: Neowin benefits from revenue of each sale made through our branded deals site powered by StackCommerce.
    • I like Tidal, but it still does not control devices from the mobile/app and still no surround support. And yeah re: above comment I still get a lot of network errors and I am on a 4/4 Gbit Fiber connection.
  • Recent Achievements

    • Reacting Well
      NovaEdgeX earned a badge
      Reacting Well
    • Week One Done
      NovaEdgeX earned a badge
      Week One Done
    • One Year In
      BA the Curmudgeon earned a badge
      One Year In
    • Conversation Starter
      rosiecharles earned a badge
      Conversation Starter
    • First Post
      KMilenkoski1202 earned a badge
      First Post
  • Popular Contributors

    1. 1
      +primortal
      539
    2. 2
      +Edouard
      266
    3. 3
      PsYcHoKiLLa
      151
    4. 4
      Steven P.
      98
    5. 5
      macoman
      66
  • Tell a friend

    Love Neowin? Tell a friend!