Recommended Posts

I have read the documentation, specifically the following:

"4.6 - ReleaseDate

This property defines the date on which the setup file the module installs was created. It must be an eight digit number in the format YYYYMMDD (year, month, day).

* However * This property is much more important than it sounds. It actually defines the order that things are installed! AutoPatcher will install modules in the order: older date to newer date (smaller number to bigger). It also has an effect on the order things are listed in the selection window. "

I basically want to list the Stand Alone programs in alphabetical order. First I tried setting the release date all the same - that didn't work. Then I tried setting the release date to a sequence: 20000101, 20000110, 20000120, 20000130. I expected these 4 items to be sorted accordingly, but no luck.

(BTW, the standalone.apm parent file has a release date of 00000005).

This happened in 5.6.72 and 5.6.76

Any suggestions?

-John

  M2Ys4U said:
As far as I know ReleaseDate is the oder in which things are installed, not displayed. I do not think you can control the order.

I know that the documentation is not always correct but it does say:

"It also has an effect on the order things are listed in the selection window."

I guess I was assuming that this "effect" was something I could utilize to alpha sort the selection list.

-John

i believed it did when i wrote the documentation because i gave sub-parents lower values and they appeared first. i didn't actually experiment though i have to admit and it could have been through raptors design that sub-parents come first... if so a correction to the documentation is in order... (on the todo list to check it out at some point and correct if necessary)

I've been playing with the order a lot so I know the answer to this one. The display order is 100 percent dependent on the module's releasedate property. Lowest release date on top, highest on bottom.

I was thinking about asking Raptor to create a new property to control the order of displayed updates compared to what order they are installed in but I've been having him play with the executable so much lately, I was going to suggest this later. <hint, hint>

  Tenchi103 said:
I've been playing with the order a lot so I know the answer to this one. The display order is 100 percent dependent on the module's releasedate property. Lowest release date on top, highest on bottom.

I was thinking about asking Raptor to create a new property to control the order of displayed updates compared to what order they are installed in but I've been having him play with the executable so much lately, I was going to suggest this later. <hint, hint>

Tenchi103,

Sounds like it works for you - what am I doing wrong? - I tried setting the ReleaseDate for 4 modules to a sequence: 20000101, 20000110, 20000120, 20000130. I expected these 4 modules to be sorted accordingly, but no luck!

Thanks, John

  Tenchi103 said:
How are you're modules currenlty being displayed when you run AP?

I tried a number of different schemes, even setting all the ReleaseDates to the same number (9010). Here is a list of the ReleaseDates from the APM files in the same order as displayed on the 'List of Available Items' screen:

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000130

ReleaseDate=00009010

ReleaseDate=00000050

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000120

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000101

ReleaseDate=20000110

I am running AP ver 5.6.76, but the same was happenong with 5.6.72

-John

First thing you should always practice is to create a standard naming scheme for your ReleaseDates making sure that the number is greater than the parent module they are in.

Try beginning with 2000005 and go in increments of 5 (Example: 2000005, 2000010, 2000015...)

Give this a try and see what happens.

  Tenchi103 said:
First thing you should always practice is to create a standard naming scheme for your ReleaseDates making sure that the number is greater than the parent module they are in.

Try beginning with 2000005 and go in increments of 5 (Example: 2000005, 2000010, 2000015...)

Give this a try and see what happens.

Tenchi103,

I finally found some time to play with the ReleaseDate. I set the modules to the following sequence:

ReleaseDate=20000110

ReleaseDate=20000120

ReleaseDate=20000130

....

ReleaseDate=20000360

And the Parent Module had a ReleaseDate=00000005

No luck, display order had no relationship to ReleaseDate order.

BUT, when I changed the Parent Module ReleaseDate to 20000005 it all worked fine!

So I hope this helps others....

John

  major4579 said:
Tenchi103,

I finally found some time to play with the ReleaseDate. I set the modules to the following sequence:

ReleaseDate=20000110

ReleaseDate=20000120

ReleaseDate=20000130

....

ReleaseDate=20000360

And the Parent Module had a ReleaseDate=00000005

No luck, display order had no relationship to ReleaseDate order.

BUT, when I changed the Parent Module ReleaseDate to 20000005 it all worked fine!

So I hope this helps others....

John

I'm curious, is the parent module you created inside another module or is it on the root of AP? If it's inside another module, this would explain why you had to up the ReleaseDate from 00000005 to 20000005. (The parent module has have a larger number than the module that it's in)

  Tenchi103 said:
I'm curious, is the parent module you created inside another module or is it on the root of AP? If it's inside another module, this would explain why you had to up the ReleaseDate from 00000005 to 20000005. (The parent module has have a larger number than the module that it's in)

It's a root module - the APM file resides in "\autopatcher\modules".

All the actual modules (the ones I numbered sequentially) reside in "\Autopatcher\modules\stand_alone_mods".

Here's the contents of the root module APM file:

-----------------------------------------------------------------------------

[AutoPatcher 5.6 Module]

[General]

Title=Stand-Alone Modules

Description=

Author=Various

ModuleAuthor=ModuleEditor2

WebPage=

ReleaseDate=20000005

[behavior]

ParentID=

UniqueID=STAND_ALONE_PARENT

Critical=False

AutoExpand=True

Depends=

TimeToInstall=0

TimeToRemove=0

RequiresReboot=False

[DetectionRegistry]

RegistryPath=

KeyName=

KeyValue=

[DetectionFile]

FilePath=

FileName=

FileVersion=

[OperatingSystem]

WindowsVersion=ANY

SystemLanguage=1033

[systemComponents]

InternetExplorer=ANY

WindowsMediaPlayer=ANY

DotNetFramework=ANY

WindowsInstaller=ANY

MSNMessenger=ANY

[OfficeComponents]

Word=ANY

Excel=ANY

PowerPoint=ANY

Outlook=ANY

Publisher=ANY

Visio=ANY

Project=ANY

OneNote=ANY

FrontPage=ANY

InfoPath=ANY

Access=ANY

[installation]

[Removal]

--------------------------------------------------------------------

-John

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • They've been focusing on security and quality? Could have fooled me. Their own paying customers literally just got breached because they failed to push SharePoint updates downstream to on prem servers operating outside of their "365" ecosystem.
    • The animosity is unnecessary, when I opened the page I only saw one response which never mentioned your other steps, and when I hit reply it jumped straight to the bottom and again, I saw no other responses.  I was simply agreeing with the first comment that said yes, you should be fine if you erase its current operating system. Using another PC, or the copy of Windows that comes on that PC (former option is more trustworthy), download and run the Windows Media Creation tool.  It will walk you thru the process of downloading Windows and writing it to a USB stick.  It will even ask you at one point whether you're reinstalling it to the current machine or installing it on another machine. Then just boot the PC in question from that USB stick.  Usually spamming Esc, Del, F-8, F-9, F-10, F-11, F-12 or F-2 immediately after power on will bring up a boot menu, it varies by manufacturer.  If Windows starts booting you either missed your window or hit the wrong key. Follow the on-screen instructions.  When it gets to the disk formatting part I usually just delete all the partitions on the destination drive, then select the unpartitioned space as my destination.  The Windows installer will then automatically partition the drive as needed. Be prepared to download drivers from the PC manufacturer's website, they may not come bundled with Windows and you may not be able to use things like WiFi or ethernet until you have them.  They "might" work straight away, but they also might not.  Better to be prepared with a spare PC and a USB stick to transfer them over.
    • Wise Disk Cleaner 11.2.5 by Razvan Serea Wise Disk Cleaner is a free disk utility designed to help you keep your disk clean by deleting any unnecessary files. Usually, these unnecessary, or junk files appear as a result of program's incomplete uninstalls, or Temporary Internet Files. It is best if these files are wiped out from time to time, since they may, at some point, use a considerable amount of space on your drives. Wise Disk Cleaner, with its intuitive and easy to use interface, helps you quickly wipe out all the junk files. Using the program is indeed easy. It also works fast when both scanning for files and deleting files. The new Wise Disk Cleaner has more advantages: improved performance, better interface and scans/cleans more thoroughly. Wise Disk Cleaner Free provides lifetime free update service and Unlimited Free technical support. The first Slimming System software Wise Disk Cleaner is the first system slimming tool, which will help you to remove Windows useless files that you don't need, such as Korean IME, Windows Sample music, videos, pictures, Installers and Uninstallers of Updates Patches etc. Wise Disk Cleaner 11.2.5 Build 845 changelog: Added cleaning rules for Legacy Games Launcher, Letasoft Sound Booster, Macrium Reflect, MagicLine4NX, MAGIX Photostory, MakeHuman, Max Recorder, Maxprog iCash, Lexware, LG PC Suite, Lightworks, LINE, Listary, and LockHunter. Improved cleaning rules for Xunlei, PowerToys, Meitu, OneDrive, and Tencent Video. For security reasons, users can no longer delete the latest system restore point in the Restore Center. Enhanced System Slimming. Fixed minor bugs from the previous version. Download: Wise Disk Cleaner 11.2.5 | 6.9 MB (Freeware) Download: Portable Wise Disk Cleaner 11.2.5 | 7.3 MB View: Wise Disk Cleaner Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • I keep getting ignored when I ask what you guys mean by nuke it. I described the steps and I keep getting the same generic instructions. Can you look at what I have posted multiple times already and validate what I have described? You can't assume everyone has your level of expertise and can interpret your nuking advice. After this many posts in this thread, I don't think we need the same generic advice about just nuke it and reinstall. It's already been said. So can you please outline the specifics? Made in Ukraine? Are you sure?
  • Recent Achievements

    • Week One Done
      Itbob513626 earned a badge
      Week One Done
    • One Month Later
      Itbob513626 earned a badge
      One Month Later
    • Rookie
      EdwardFranciscoVilla went up a rank
      Rookie
    • Week One Done
      MoJo624 earned a badge
      Week One Done
    • Collaborator
      aeganwn earned a badge
      Collaborator
  • Popular Contributors

    1. 1
      +primortal
      617
    2. 2
      ATLien_0
      236
    3. 3
      Xenon
      156
    4. 4
      +FloatingFatMan
      120
    5. 5
      Michael Scrip
      114
  • Tell a friend

    Love Neowin? Tell a friend!