Recommended Posts

I have read the documentation, specifically the following:

"4.6 - ReleaseDate

This property defines the date on which the setup file the module installs was created. It must be an eight digit number in the format YYYYMMDD (year, month, day).

* However * This property is much more important than it sounds. It actually defines the order that things are installed! AutoPatcher will install modules in the order: older date to newer date (smaller number to bigger). It also has an effect on the order things are listed in the selection window. "

I basically want to list the Stand Alone programs in alphabetical order. First I tried setting the release date all the same - that didn't work. Then I tried setting the release date to a sequence: 20000101, 20000110, 20000120, 20000130. I expected these 4 items to be sorted accordingly, but no luck.

(BTW, the standalone.apm parent file has a release date of 00000005).

This happened in 5.6.72 and 5.6.76

Any suggestions?

-John

  M2Ys4U said:
As far as I know ReleaseDate is the oder in which things are installed, not displayed. I do not think you can control the order.

I know that the documentation is not always correct but it does say:

"It also has an effect on the order things are listed in the selection window."

I guess I was assuming that this "effect" was something I could utilize to alpha sort the selection list.

-John

i believed it did when i wrote the documentation because i gave sub-parents lower values and they appeared first. i didn't actually experiment though i have to admit and it could have been through raptors design that sub-parents come first... if so a correction to the documentation is in order... (on the todo list to check it out at some point and correct if necessary)

I've been playing with the order a lot so I know the answer to this one. The display order is 100 percent dependent on the module's releasedate property. Lowest release date on top, highest on bottom.

I was thinking about asking Raptor to create a new property to control the order of displayed updates compared to what order they are installed in but I've been having him play with the executable so much lately, I was going to suggest this later. <hint, hint>

  Tenchi103 said:
I've been playing with the order a lot so I know the answer to this one. The display order is 100 percent dependent on the module's releasedate property. Lowest release date on top, highest on bottom.

I was thinking about asking Raptor to create a new property to control the order of displayed updates compared to what order they are installed in but I've been having him play with the executable so much lately, I was going to suggest this later. <hint, hint>

Tenchi103,

Sounds like it works for you - what am I doing wrong? - I tried setting the ReleaseDate for 4 modules to a sequence: 20000101, 20000110, 20000120, 20000130. I expected these 4 modules to be sorted accordingly, but no luck!

Thanks, John

  Tenchi103 said:
How are you're modules currenlty being displayed when you run AP?

I tried a number of different schemes, even setting all the ReleaseDates to the same number (9010). Here is a list of the ReleaseDates from the APM files in the same order as displayed on the 'List of Available Items' screen:

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000130

ReleaseDate=00009010

ReleaseDate=00000050

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000120

ReleaseDate=00009010

ReleaseDate=00009010

ReleaseDate=20000101

ReleaseDate=20000110

I am running AP ver 5.6.76, but the same was happenong with 5.6.72

-John

First thing you should always practice is to create a standard naming scheme for your ReleaseDates making sure that the number is greater than the parent module they are in.

Try beginning with 2000005 and go in increments of 5 (Example: 2000005, 2000010, 2000015...)

Give this a try and see what happens.

  Tenchi103 said:
First thing you should always practice is to create a standard naming scheme for your ReleaseDates making sure that the number is greater than the parent module they are in.

Try beginning with 2000005 and go in increments of 5 (Example: 2000005, 2000010, 2000015...)

Give this a try and see what happens.

Tenchi103,

I finally found some time to play with the ReleaseDate. I set the modules to the following sequence:

ReleaseDate=20000110

ReleaseDate=20000120

ReleaseDate=20000130

....

ReleaseDate=20000360

And the Parent Module had a ReleaseDate=00000005

No luck, display order had no relationship to ReleaseDate order.

BUT, when I changed the Parent Module ReleaseDate to 20000005 it all worked fine!

So I hope this helps others....

John

  major4579 said:
Tenchi103,

I finally found some time to play with the ReleaseDate. I set the modules to the following sequence:

ReleaseDate=20000110

ReleaseDate=20000120

ReleaseDate=20000130

....

ReleaseDate=20000360

And the Parent Module had a ReleaseDate=00000005

No luck, display order had no relationship to ReleaseDate order.

BUT, when I changed the Parent Module ReleaseDate to 20000005 it all worked fine!

So I hope this helps others....

John

I'm curious, is the parent module you created inside another module or is it on the root of AP? If it's inside another module, this would explain why you had to up the ReleaseDate from 00000005 to 20000005. (The parent module has have a larger number than the module that it's in)

  Tenchi103 said:
I'm curious, is the parent module you created inside another module or is it on the root of AP? If it's inside another module, this would explain why you had to up the ReleaseDate from 00000005 to 20000005. (The parent module has have a larger number than the module that it's in)

It's a root module - the APM file resides in "\autopatcher\modules".

All the actual modules (the ones I numbered sequentially) reside in "\Autopatcher\modules\stand_alone_mods".

Here's the contents of the root module APM file:

-----------------------------------------------------------------------------

[AutoPatcher 5.6 Module]

[General]

Title=Stand-Alone Modules

Description=

Author=Various

ModuleAuthor=ModuleEditor2

WebPage=

ReleaseDate=20000005

[behavior]

ParentID=

UniqueID=STAND_ALONE_PARENT

Critical=False

AutoExpand=True

Depends=

TimeToInstall=0

TimeToRemove=0

RequiresReboot=False

[DetectionRegistry]

RegistryPath=

KeyName=

KeyValue=

[DetectionFile]

FilePath=

FileName=

FileVersion=

[OperatingSystem]

WindowsVersion=ANY

SystemLanguage=1033

[systemComponents]

InternetExplorer=ANY

WindowsMediaPlayer=ANY

DotNetFramework=ANY

WindowsInstaller=ANY

MSNMessenger=ANY

[OfficeComponents]

Word=ANY

Excel=ANY

PowerPoint=ANY

Outlook=ANY

Publisher=ANY

Visio=ANY

Project=ANY

OneNote=ANY

FrontPage=ANY

InfoPath=ANY

Access=ANY

[installation]

[Removal]

--------------------------------------------------------------------

-John

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Have a ton of the Beach Boys on USB that I play while cruising in the car in my avatar.  Good times music. Very sad to hear of his passing. 😪
    • Haha, that didn't take long. On the bright side, that one is a fix for more issues...we'll see if anything major pops-up in the coming weeks.
    • Something like this https://www.neowin.net/news/wi...ashes-when-launching-games/ you mean?
    • Valerion StreamMaster Plus2 4K Dolby Vision gaming projector is $300 off with promo coupon by Sayan Sen If you are in the market for a premium projector, you should have a look at the Valerion StreamMaster Plus2 4K Gaming Projector. The product is designed primarily for gaming and multimedia use and promises an excellent "smoother streaming experience" compared to other projectors in its class. The projector supports "true" 4K Ultra HD, which should provide clear images for detailed gaming environments and media playback. The brightness level of 2000 lumens intends to make the device usable in various ambient lighting conditions, from dim gaming rooms to brighter living areas. And in terms of audio, it packs an S/PDIF for digital audio out. The key technical specifications of the Valerion StreamMaster Plus2 4K Gaming Projector are given below: Brightness: 2000 ISO Lumens Light Source: RGB triple laser Contrast Ratio: 10000:1 with EBL Mode (EBL = enhanced black level) Color Gamut: 110% Rec.2020 Throw Ratio: Fixed 1.2:1 (supports screen sizes up to 300 inches) Dynamic Tone Mapping: Enabled HDR and 3D Support: Supports IMAX Enhanced, Dolby Vision, HDR10+, Active 3D, Filmmaker Mode Google TV OS AI-SoC MT9618, 4 GB RAM and 128 GB ROM Input Lag: 4ms at 1080P@240Hz, 8ms at 1080P@120Hz, 15ms at 4K@60Hz Wi-Fi 6e, Bluetooth 5.2 Typically, it is listed at $1999. However, the projector is currently available for $1699, thanks to a special promo code, making it an attractive option for those looking to upgrade their gaming or home cinema setup. Get it at the link below: StreamMaster Plus2 4K Gaming Projector - 300" IMAX Enhanced Home Theater, 3D & Dolby Vision, HDR10+: $1999 + $300 off with promo code "VALERION" at checkout => $1699.00 (Shipped by Amazon, Sold by Valerion) This Amazon deal is US-specific and not available in other regions unless specified. If you don't like it or want to look at more options, check out the Amazon US deals page here. Get Prime (SNAP), Prime Video, Audible Plus or Kindle / Music Unlimited. Free for 30 days. As an Amazon Associate, we earn from qualifying purchases.
    • Yeah you are reading different article. Does your article talk about Elon's big dong and has video him naked by any chance? I think the problem is you are commenting on the wrong tab you are actually viewing. Sorry the Telsa you buy is not the same product these robotaxi's will be. WTF? Funny how you didn't even reply to Steven's comment here. Thanks for playing but you are getting all worked up and saying ###### you wouldn't to anyone's face so we are done.
  • Recent Achievements

    • Apprentice
      Cole Multipass went up a rank
      Apprentice
    • Posting Machine
      David Uzondu earned a badge
      Posting Machine
    • One Month Later
      Stokenking earned a badge
      One Month Later
    • One Month Later
      Kevin Jones earned a badge
      One Month Later
    • Week One Done
      Kevin Jones earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      535
    2. 2
      ATLien_0
      263
    3. 3
      +Edouard
      195
    4. 4
      +FloatingFatMan
      184
    5. 5
      snowy owl
      135
  • Tell a friend

    Love Neowin? Tell a friend!