Recommended Posts

Okay this is my first attempt of putting a skin on anything so don't laugh atlot at me. I am thinking about adding a network bar somewhere for my internal/external IP addresses, upload/download and network drive status.

http://members.lycos.co.uk/troubledmind/skin.jpg

Wow, that's a really impressive config... bit huge for my tests, but very nice job overall!

This is my first post but I've been hanging around neowin for quite a while. Decided to post my config since I'm kind of proud of it and all...

Give Stevofc credits. I also modified his sam script. Although I don't use it anymore as I find samurize and rainlendar uses too much system resources. Only things I still run is Y'z Dock and Y'z Toolbar. Click on DevianArt link at the bottom to get my script.

post-45-1075241456.jpg

Give Stevofc credits. I also modified his sam script. Although I don't use it anymore as I find samurize and rainlendar uses too much system resources. Only things I still run is Y'z Dock and Y'z Toolbar. Click on DevianArt link at the bottom to get my script.

Yeah, the basic idea of it all was somewhat from his bar but I restarted from scratch. I do want to thank the creator of the GIMP icons as well.

I have taken my samurize skin that some of you saw earlier and have changed it greatly. I have added my network computers with pictures and network upload and download information. I also added a part that tells me the most recent post from the xoxide forums. Also by double clicking on the forum topic such as "case gallery" it will automatically open internet explorer and take me to the case gallery. Well here is the skin and comments are appreciated.

skin5.jpg

obs0lete ... Is there a prob with your config? Its been working fine for a week or two, and over the last few days it keeps screwing up with the weather part of things. I.E. when starting the weather part stays on NA and my system locks up until I close Samurize via the task manager. I have uninstalled and reinstalled samurize (as there was no way I could find of changing the config without it locking up) and found that my other configs are fine, but as soon as I reload your config it goes loopy again :( Any suggestions?

obs0lete ... Is there a prob with your config? Its been working fine for a week or two, and over the last few days it keeps screwing up with the weather part of things.  I.E. when starting the weather part stays on NA and my system locks up until I close Samurize via the task manager. I have uninstalled and reinstalled samurize (as there was no way I could find of changing the config without it locking up) and found that my other configs are fine, but as soon as I reload your config it goes loopy again :( Any suggestions?

Hmm I'm not sure why it would do that. The only thing I can suggest when it happens is to delete your DesktopWeather30min.xml and DesktopWeather120min.xml files (they are in C:\Program Files\Samurize\Scripts) and then reload the config and hope for the best.

Had tried that already, no joy :( Out of curiosity I tried the original version from a while back which I had archved, and that works perfectly (apart from the icons not updating, even though there is a whole row of Samurize icons). It just seems to be the new version thats screwing up (I made sure I replaced the weatherscript from the older version to the new one when necessary)

Any other suggestions?

Problem sorted, apparantly a few people have been having similar problems with the weather script over the last few days (not you config obs0lete) and all is working fine again now. Maybe weather.com were messing about again :)

Anyhow, glad to say your config is now working again obs0lete ... Knew it wouldn't be your fault, as it had been working fine for ages before now :)

Thanks for the positive feedback! :)

I made some major revisions to my samurize...

:: Rev. 1.1 ::

New Updates:

- Added scrolling feature for long titles.

- Changed the position of the clock and added a "blinking" indicator for seconds. (1 blink per 2 seconds)

- Changed the size of the boarders and the relative position of objects to optimize the looks.

- Added PLAYING and PAUSED indicator.

- Other known bugs fixed.

Known problems: (These problems relate to the plugins)

- Radio broadcasting titles don't refresh unless you manually "reload" samurize.

- Scrolling screws up when the title is centered... that's why the title is not centered any more.

- I wasn't able to find a font named "small fonts" in my fonts folder. Not sure if its Windows XP default font.

It is only used on the network transfer, "IN" and "OUT," indicator.

Does anyone know how to correct these problems? ...especially titles for radio.

I've included all the possible fonts I could find that I used on this. Let me know if the fonts don't display properly...

:: Download ::

http://snipurl.com/mysamurize

Thanks for the positive feedback! :)

I made some major revisions to my samurize...

:: Rev. 1.1 ::

New Updates:

- Added scrolling feature for long titles.

- Changed the position of the clock and added a "blinking" indicator for seconds. (1 blink per 2 seconds)

- Changed the size of the boarders and the relative position of objects to optimize the looks.

- Added PLAYING and PAUSED indicator.

- Other known bugs fixed.

Known problems: (These problems relate to the plugins)

- Radio broadcasting titles don't refresh unless you manually "reload" samurize.

- Scrolling screws up when the title is centered... that's why the title is not centered any more.

- I wasn't able to find a font named "small fonts" in my fonts folder. Not sure if its Windows XP default font.

It is only used on the network transfer, "IN" and "OUT," indicator.

Does anyone know how to correct these problems? ...especially titles for radio.

I've included all the possible fonts I could find that I used on this. Let me know if the fonts don't display properly...

:: Download ::

http://snipurl.com/mysamurize

dude that is one NICE script. very well done man.

I thought a smaller + better performer would make my computer happy... :rolleyes:

soooo.... I introduce MiniSamurize!

:: Rev. 1.2 ::

- Added MiniSamurize to minimize CPU usage: 70% decrease in CPU utilization!

> Same functionality, except playlist and visualization is gone.

> Uses Winamp's internal taskbar scrolling to display titles: Loads huge playlist faster!

- Fixed clock: it did not display in 12-hour format.

Everything is included...

:: Download ::

http://snipurl.com/mysamurize

post-45-1075504896.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Ahh, I didn't know that. It makes sense. I was thinking I would be fine with 50 hours, but 100 is close enough that I wouldn't feel like I am paying for more than I am using. I might check it out sometime.
    • Google's next-gen Tensor AI chips might be produced by Samsung, report says by Hamid Ganji Image via Google Google’s Tensor Processing Unit (TPU) is produced in collaboration with companies such as Broadcom and TSMC, but a recent report suggests that the search giant is in talks with Samsung to hand over part of the production to the Korean tech company. According to a report by The Information, citing people familiar with the matter, Google has begun talks with Samsung about using its chip manufacturing capacity for the next generation of Tensor AI chips. Google’s upcoming TPUs are reportedly codenamed “Icefish” and will be produced using Samsung's 2-nanometer process technology. Meanwhile, Samsung is expected to produce only a portion of the next-generation Tensor chips, with most of the production remaining at TSMC. The Information says the new Tensor chips are currently in the design stage and are scheduled to enter mass production in 2028. TSMC is generally considered one of the most reliable chip manufacturing partners and is trusted by tech giants such as Apple and Google. However, the growing demand for TSMC’s AI chips, combined with the company’s focus on meeting demand from AI data centers, has reportedly prompted Google to seek additional manufacturing partners for its next-generation TPUs. Besides Samsung and TSMC, Intel could also be assigned part of the production. The Information reported this week is that Google has begun talks with Intel to produce up to three million TPUs in 2028. However, this is not the first time Google has partnered with Samsung on chip production, as Samsung has previously manufactured Tensor chips for Pixel smartphones. Google’s Tensor Processing Unit is used in cloud data centers and competes with NVIDIA’s chips, which currently dominate the market. By relying on in-house chips, Google can not only reduce its dependence on third-party providers but also create new revenue opportunities. The company has already supplied its TPUs to the AI firm Anthropic.
    • Reminder that the Premium and Ultimate plans already come with a 100 hour per month limit, which you then have to pay more to increase in 15 hour blocks.
    • It does invite Linux because MS should have been improving their products all along these years instead chose to ignore the users now this year they’re making all of these improvements to their products where as Linux doesn’t have this kind of problems in fact it has gotten so good I can even play Windows games in Steam that I no longer ever needed Windows to carry on with my life, unlike you still use Windows and chose to try beat down down those who don't use Windows because they love their LG TV. (Surprisingly I actually own a 55” LED LG TV and it has been going strong for almost 14 years, longer than any Sony TV”)
    • As much as I love owning my own hardware, it's hard to argue with the value. I'm not a huge gamer, I'd actually be interested in a cheaper plan with limited monthly hours, or even a pay-by-the-hour plan.
  • Recent Achievements

    • Week One Done
      FBSPL earned a badge
      Week One Done
    • One Year In
      Jim Dugan earned a badge
      One Year In
    • One Month Later
      Tommi118 earned a badge
      One Month Later
    • One Month Later
      sjbousquet earned a badge
      One Month Later
    • Week One Done
      sjbousquet earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      487
    2. 2
      PsYcHoKiLLa
      196
    3. 3
      +Edouard
      155
    4. 4
      Steven P.
      84
    5. 5
      ATLien_0
      69
  • Tell a friend

    Love Neowin? Tell a friend!