Recommended Posts

Okay this is my first attempt of putting a skin on anything so don't laugh atlot at me. I am thinking about adding a network bar somewhere for my internal/external IP addresses, upload/download and network drive status.

http://members.lycos.co.uk/troubledmind/skin.jpg

Wow, that's a really impressive config... bit huge for my tests, but very nice job overall!

This is my first post but I've been hanging around neowin for quite a while. Decided to post my config since I'm kind of proud of it and all...

Give Stevofc credits. I also modified his sam script. Although I don't use it anymore as I find samurize and rainlendar uses too much system resources. Only things I still run is Y'z Dock and Y'z Toolbar. Click on DevianArt link at the bottom to get my script.

post-45-1075241456.jpg

Give Stevofc credits. I also modified his sam script. Although I don't use it anymore as I find samurize and rainlendar uses too much system resources. Only things I still run is Y'z Dock and Y'z Toolbar. Click on DevianArt link at the bottom to get my script.

Yeah, the basic idea of it all was somewhat from his bar but I restarted from scratch. I do want to thank the creator of the GIMP icons as well.

I have taken my samurize skin that some of you saw earlier and have changed it greatly. I have added my network computers with pictures and network upload and download information. I also added a part that tells me the most recent post from the xoxide forums. Also by double clicking on the forum topic such as "case gallery" it will automatically open internet explorer and take me to the case gallery. Well here is the skin and comments are appreciated.

skin5.jpg

obs0lete ... Is there a prob with your config? Its been working fine for a week or two, and over the last few days it keeps screwing up with the weather part of things. I.E. when starting the weather part stays on NA and my system locks up until I close Samurize via the task manager. I have uninstalled and reinstalled samurize (as there was no way I could find of changing the config without it locking up) and found that my other configs are fine, but as soon as I reload your config it goes loopy again :( Any suggestions?

obs0lete ... Is there a prob with your config? Its been working fine for a week or two, and over the last few days it keeps screwing up with the weather part of things.  I.E. when starting the weather part stays on NA and my system locks up until I close Samurize via the task manager. I have uninstalled and reinstalled samurize (as there was no way I could find of changing the config without it locking up) and found that my other configs are fine, but as soon as I reload your config it goes loopy again :( Any suggestions?

Hmm I'm not sure why it would do that. The only thing I can suggest when it happens is to delete your DesktopWeather30min.xml and DesktopWeather120min.xml files (they are in C:\Program Files\Samurize\Scripts) and then reload the config and hope for the best.

Had tried that already, no joy :( Out of curiosity I tried the original version from a while back which I had archved, and that works perfectly (apart from the icons not updating, even though there is a whole row of Samurize icons). It just seems to be the new version thats screwing up (I made sure I replaced the weatherscript from the older version to the new one when necessary)

Any other suggestions?

Problem sorted, apparantly a few people have been having similar problems with the weather script over the last few days (not you config obs0lete) and all is working fine again now. Maybe weather.com were messing about again :)

Anyhow, glad to say your config is now working again obs0lete ... Knew it wouldn't be your fault, as it had been working fine for ages before now :)

Thanks for the positive feedback! :)

I made some major revisions to my samurize...

:: Rev. 1.1 ::

New Updates:

- Added scrolling feature for long titles.

- Changed the position of the clock and added a "blinking" indicator for seconds. (1 blink per 2 seconds)

- Changed the size of the boarders and the relative position of objects to optimize the looks.

- Added PLAYING and PAUSED indicator.

- Other known bugs fixed.

Known problems: (These problems relate to the plugins)

- Radio broadcasting titles don't refresh unless you manually "reload" samurize.

- Scrolling screws up when the title is centered... that's why the title is not centered any more.

- I wasn't able to find a font named "small fonts" in my fonts folder. Not sure if its Windows XP default font.

It is only used on the network transfer, "IN" and "OUT," indicator.

Does anyone know how to correct these problems? ...especially titles for radio.

I've included all the possible fonts I could find that I used on this. Let me know if the fonts don't display properly...

:: Download ::

http://snipurl.com/mysamurize

Thanks for the positive feedback! :)

I made some major revisions to my samurize...

:: Rev. 1.1 ::

New Updates:

- Added scrolling feature for long titles.

- Changed the position of the clock and added a "blinking" indicator for seconds. (1 blink per 2 seconds)

- Changed the size of the boarders and the relative position of objects to optimize the looks.

- Added PLAYING and PAUSED indicator.

- Other known bugs fixed.

Known problems: (These problems relate to the plugins)

- Radio broadcasting titles don't refresh unless you manually "reload" samurize.

- Scrolling screws up when the title is centered... that's why the title is not centered any more.

- I wasn't able to find a font named "small fonts" in my fonts folder. Not sure if its Windows XP default font.

It is only used on the network transfer, "IN" and "OUT," indicator.

Does anyone know how to correct these problems? ...especially titles for radio.

I've included all the possible fonts I could find that I used on this. Let me know if the fonts don't display properly...

:: Download ::

http://snipurl.com/mysamurize

dude that is one NICE script. very well done man.

I thought a smaller + better performer would make my computer happy... :rolleyes:

soooo.... I introduce MiniSamurize!

:: Rev. 1.2 ::

- Added MiniSamurize to minimize CPU usage: 70% decrease in CPU utilization!

> Same functionality, except playlist and visualization is gone.

> Uses Winamp's internal taskbar scrolling to display titles: Loads huge playlist faster!

- Fixed clock: it did not display in 12-hour format.

Everything is included...

:: Download ::

http://snipurl.com/mysamurize

post-45-1075504896.jpg

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Absolutely 👍
    • Exactly what I was thinking. All of a sudden in span of a month multiple CEO's from scam altman to this clown has had sudden change of heart does not seem organic change lol
    • Microsoft releases Visual Studio Code 1.124 with smarter autonomous AI agents by Paul Hill Microsoft has just released Visual Studio Code 1.124 with a focus on faster agent workflows and improved agent autonomy. Microsoft outlined the following features as the key items in this update: Autopilot: Autopilot, enabled by default, is now smarter to determine when a task is truly done. Background sessions: Quickly send a request in the background and keep composing the next session. Session navigation: Search, jump, and step through agent sessions with the keyboard. Browser history: Revisit and search pages you've already opened in the integrated browser. With VS Code 1.124, Microsoft has enabled Autopilot by default. For those that don’t know, Autopilot is a chat permission level that you can pick to give agents permission to take initiative and act autonomously, without needing explicit user approval for each action. Also related to Autopilot, Microsoft introduced Advanced Autopilot, which changes how Autopilot decides when to keep iterating and when to finish. This helps you get more complete results without manually monitoring loops. This feature works using a small utility model that reads a transcript of the chat and decides when the task is done. Another new feature in 1.124 is the Agents window, which lets you easily explore, iterate on, and review agent sessions across projects and machines. Previously, starting a new agent session meant waiting for it to load before you could compose the next one. With this update, sessions can be requested in the background. This VS Code update also brings session navigation updates to switch between them more quickly. The update also lets you reload or reopen the Agents window so that it no longer loses your layout, so you will land back where you left off. If you use the integrated browser in VS Code, you will notice that it now retains the history of visited pages. Suggestions will now show when typing in the URL bar and can be managed by using Ctrl+H within a browser tab. The browser now also lets you customize the toolbar more; just right-click on the toolbar area to the right of the URL input. Finally, the browser has faster agentic text entry. Another improvement is experimental enterprise-managed Copilot plugin policies that allow admins to centrally control which chat plugins and plugin marketplaces are available to developers. If you have VS Code installed, 1.124 should install automatically, or you'll get a prompt. If you don't have it installed, get it here.
  • Recent Achievements

    • First Post
      X-No-file earned a badge
      First Post
    • One Month Later
      johnjacobb40 earned a badge
      One Month Later
    • One Year In
      Primer1st earned a badge
      One Year In
    • Experienced
      JayZJay went up a rank
      Experienced
    • Reacting Well
      Sir_Timbit earned a badge
      Reacting Well
  • Popular Contributors

    1. 1
      +primortal
      511
    2. 2
      PsYcHoKiLLa
      214
    3. 3
      +Edouard
      145
    4. 4
      Steven P.
      86
    5. 5
      ATLien_0
      84
  • Tell a friend

    Love Neowin? Tell a friend!