q6600 overclock


Recommended Posts

hi guys, just bought a new system,

q6600

artic freezer 7 pro

asus p5n32-e sli

ocz reaper 4x1gb ddr2 800

evga 8800 ultra :cool:

antec p182 added a tricool fan 120mm

what do you guys suggest for overclocking, i was thinking of something like this:

fbs 400

multiplier 7

clock 2.8 ghz

i didnt think about what kind of voltage i would need...does anyone have any advice (apps to test stability, vcore) and btw im aiming to get 1:1 cpu:ram

Link to comment
https://www.neowin.net/forum/topic/579212-q6600-overclock/
Share on other sites

Welcome to Neowin first :)

Very nice system and overclock dude! I'm almost sure you can reach that on stock voltage, because everyone I know with a Q6600 is running it on 333x9 = 3.0GHz at least, on stock voltage.

To test stability, use Prime95 by keeping 2-4 instances of it running for several hours or so, and watch the temperature closely with Speedfan or the utility provided by your motherboard, it should not reach 62c+ under load for longevity. What cooler you've got? Quad's gets really hot, more than any Duo's.

EDIT: OPPS, seen you got Artic Freezer, nice cooler (Y).

Good luck.

Edited by Tantawi

i got the g0 version, after many trial and errors i got it stable ( not very impressive i admit ) at 3GHz

fsb 333

multi 9

idle 41 load 57

the thing is that even if i run orthos x4 only 2 of the core are 100% the other 2 are just sitting there...0%-2%.

cant get fbs more then that too even when lowering multi...im gonna check if there might be a bios uptade or something to help.

after some looking around i found out there is an issue: the board has some kind of lame fbs hole between 350-400 mhz, but hours later i found a guide w/ instructions how to get 400mhz (what im looking for) settings are :

bios recommended 1103

nvidia gpu ex:disable

linkboot:disable

spread spectrum ctrl:disable all

execute disable bit:disable

virtualisation technology:disable

e intel seepstep:disable

c c1:disable

leg usb support:disable

hpet:disable

cpu vtt:1.55 max

1.2 ht:1.3

nb core:1.4

those settings are to reach a fsb of 400, i will try those settings tonight and post results later

source: http://www.overclock.net/intel-motherboard...king-guide.html

  • 1 year later...
i got the g0 version, after many trial and errors i got it stable ( not very impressive i admit ) at 3GHz

fsb 333

multi 9

idle 41 load 57

the thing is that even if i run orthos x4 only 2 of the core are 100% the other 2 are just sitting there...0%-2%.

cant get fbs more then that too even when lowering multi...im gonna check if there might be a bios uptade or something to help.

Hi guys,

I'm a noob to overclocking but I've got a nearly identical setup, a P5N32-E SLI with a Q6600 (G0) and 4x1GB OCZ 8500 EPP RAM. I've been unable to get any stable overclock above 2.8Ghz, yet seems everywhere I read, 3.0Ghz (9x333) is easily achievable on stock voltages. I'm currently running BIOS 1503. Can anyone walk me through (or link me to) the setup to get this board and CPU stable at 3.0Ghz? Doesn't matter what I try, my PC always BSODs at anything over 2.8!

Some other details about my system:

Case: Coolermaster CM-690

Fan: Thermaltake Typhoon

Many thanks in advance

Stop spreadning nonsense, i run a 630i and overclock my 2.5Ghz E5200 to way over 3.2Ghz and its as stable as anything.

It may run smoothly for YOU. Go take a look at some of the other tech forums (AnandTech, [H]ardOCP for starters) . It (6xx series chipsets from NVIDIA) have historically had chipset cooling problems and stability issues.

It's different for every board and chip, i Have Gigabyte EP45-DSL3 with Q6600 G0, I have mine at 3.2Ghz stable

CPU Volt is 1.475 which goes down too 1.44 which is what is needed for this CPU at 3.2Ghz

North bridge v1.30V

South bridge v1.20V

Temps don't go above 55 in Prime95, Intel burntest makes CPU just under 70.

I have a Zalman 9700 CPU Cooler :D Expensive big sucker

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • It had gone weeks ago. Although thinking about it I'm on the beta.
    • They thought value of their goods would forever only drop like it used to and didn't account for sudden increase in price because of all the Ai hype. Tough luck Samsung, don't try to weasel this one out. Also American customer protection laws are a**. In Europe, you need to be compensated for a functioning product of same or better characteristics (not same price point as when it was originally bought!) if it can't be repaired and when you receive a replacement product your warranty starts from scratch because you received a different item than you previously had and old warranty thus cannot apply to it anymore. If your actual item was successfully repaired, warranty gets extended for the period the item was in service. If item is repaired to a significant extent, warranty also starts over from scratch because major part of it was replaced. Americans need to fight to get this kind of consumer protections because they are constantly getting screwed over.
    • Microsoft releases new Windows 11 Media Creation Tool with the latest updates by Taras Buria Patch Tuesday updates arrive every month, bringing users new features and security updates. To make sure customers have access to the most recent images, Microsoft also releases updates to the Media Creation Tool app, its official utility for Windows 11 installation. Today, the company pushed new ISOs to Media Creation Tool, allowing you to create images with the June 2026 Patch Tuesday updates. With the latest update, the Media Creation Tool now downloads KB5094126. It is Windows 11 version 25H2, build 26200.8655, which is also available via Windows Update. Note that the app itself remains on the previous version, which you can check in Properties > Details. The only change is that it now downloads a more recent Windows 11 build, so the only way to check is to download an ISO. The June 2026 Patch Tuesday update is a special release for Windows 11, as it brings a new performance profile to make the operating system more responsive and snappier when rendering various user interface surfaces, including the Start menu, quick settings, and more. It does so by spiking processor speeds for a brief moment, resulting in higher loads for a second or two. The so-called “Low latency profile” is rolling out gradually, but you can force-enable it with the ViVeTool app. Other changes include webcam improvements, Task Manager updates, shared audio support, and more. You can download the Media Creation Tool app from the official Microsoft website using this link. Besides MCT, Microsoft lets you download Windows 11 ISO as a file directly from the official Windows 11 website. However, you will need a third-party app to write it to your USB drive. Check out this guide if you want to know how to do that.
    • Louis Rossmann suing Samsung over "990 Pro SSD warranty scam" by Sayan Sen Back in 2023, if you recall, Neowin reviewer Robbie Khan had a dispute with Samsung over his 990 Pro SSD, which was rapidly losing its health. After significant back and forth, the tech giant had finally released firmware to "stop" the issue. Interestingly, its previous flagship at the time, the 980 Pro was also facing problems leading to two consecutive sets of firmware fixes. Three years later, it looks like a similar conflict has now broken out between tech repair entrepreneur YouTuber Louis Rossmann and Samsung, as it has escalated into a threatened lawsuit after the company allegedly refused to appropriately replace a failing 990 Pro SSD that remained under warranty. According to Rossmann, a 4TB Samsung 990 Pro NVMe SSD purchased for approximately $330 less than two years ago, began experiencing major hiccups and issues, even though he claims it had been operated under ideal cooling conditions. It was installed in a RAID 1 array and cooled by a heatsink and dual high-speed fans. However the drive reportedly started dropping out of the array, exhibiting controller-level failures that eventually became not useable in any meaningful way. Rossmann said Samsung’s support process was marked by delays and confusion from the very start. After initially contacting the wrong regional support channel, he was redirected to Samsung’s memory support division where he submitted detailed diagnostics, logs, and proof of purchase. Rossmann runs a repair company and owns an ACE Lab PC-3000 machine, which is a professional-grade data recovery equipment. As such, he had been confident in his diagnostics. Samsung even seemingly acknowledged that later. Regardless, Rossmann claims that his initial support ticket was automatically closed before a full 24-hour response window had elapsed, forcing him to reopen the case and resubmit documentation. The controversy however intensified further from here after Samsung accepted the drive for warranty evaluation but later returned it with a repair report stating that the drive had passed its testing and that the SSD had been verified as functional. Rossmann strongly disputed those claims citing that his own independent testing on PC-3000 showed write speeds reducing to as low as 40–60 MB/s before the drive failed entirely. Samsung subsequently informed him that the SSD had been reset and reflashed, passing internal stress tests. However, the company also stated that replacement units were unavailable due to an industry-wide memory shortage and suggested that a refund process could be initiated if further testing confirmed the fault. Thus, to settle, the company offered a refund of $330, the amount that was initially paid by him to make the purchase. Here, Rossmann pointed out the seeming hypocrisy of the tech giant as in how no Samsung drive was apparently allocated for warranty replacements, but they were abundantly available for retail sales especially when using business accounts. As you can see, Rossmann is indeed right, there are Samsung 990 Pro 4TB SSDs on Amazon currently for $950 (shipped and sold by first-party Amazon US itself), and they are also available on Samsung's own store too, albeit for an even higher price of $1100. Thus Rossmann argues that Samsung’s inability or unwillingness to provide a replacement while the same model remains available for purchase at significantly higher market prices reflects a failure to honor its warranty obligations. He has issued a formal 60-day notice and says he intends to file suit in Texas small claims court, asserting that companies should face greater costs for denying legitimate warranty claims than for fulfilling them. You can check out the full video titled "Samsung's 990 Pro SSD warranty policy is a scam; I'm taking them to court," at the link below. Source and image: Louis Rossmann (YouTube) As an Amazon Associate we earn from qualifying purchases
  • Recent Achievements

    • Week One Done
      davidbazooked earned a badge
      Week One Done
    • One Month Later
      Jamswaz earned a badge
      One Month Later
    • Week One Done
      Jamswaz earned a badge
      Week One Done
    • Rookie
      Marzoid went up a rank
      Rookie
    • Community Regular
      coch went up a rank
      Community Regular
  • Popular Contributors

    1. 1
      +primortal
      509
    2. 2
      PsYcHoKiLLa
      184
    3. 3
      +Edouard
      158
    4. 4
      Steven P.
      83
    5. 5
      ATLien_0
      75
  • Tell a friend

    Love Neowin? Tell a friend!