Recommended Posts

Thanks to TheRPG for opening my eyes on this subject.

After testing Vista now on two 100% identical machines for close to 48 hours I have discovered that by having superfetch set NOT TO monitor at start-up makes a big difference on a Vista PC while it?s booting up.

I started off with two identical almost bare (only basic software installed) Vista machines. One with superfetch enabled at boot-up & the other without. In the beginning they both loaded quickly and there did not seem to be any difference in boot up speed, if anything the superfetch enabled machine was a little quicker.

But then I started loading programs, Zip & RAR, Antispyware, Limewire, ATI drivers, NOD32 etc, on each machine and I noticed the more I loaded the machines up with programs the slower the enabled superfetch PC became with each boot-up.

I eventually loaded 43 programs on each machine and this is what I discovered:

The time it takes for the system that has the superfetch set NOT TO RUN AT BOOT-UP is twice as fast. This tweaked system now gets to the stage where you can actually start to use the PC and go online nearly 35 seconds quicker than the identical machine that is still superfetching at boot-up. I must stress that they are both identical ASUS OS's running the exact same setups and installed programs.

Now getting back to my Personal Home machine which is a DELL, here are the results:

Before I turned off superfetch to load programs into my system at start-up, Vista would boot up to my desktop very quickly, but then it would just hang for about 2 minutes while superfetch loaded everything. The programs it was superfetching where totally unnecessary, (get a freeware program called "autoruns" by Sysinternals and quickly run it to monitor what superfetch actually loads at start-up) You will then understand what I am talking about.

Registry settings to turn off superfetch at boot: (taken from TheRPG's post)

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management\PrefetchParameters]

"EnableSuperfetch"=dword:00000002

"EnablePrefetcher"=dword:00000001

Since turning superfetch off at boot up by changing the Reg settings this 2 minute limbo has stopped without any notable side effects to anything else.

Superfetch still works but only after the PC has booted, and the prefetch still loads the essential goodies at start up like it did in XP.

The things you have to take into account here is that Microsoft would have tested Vista with only a few "if any" programs installed onto their OS's at Redmond, and in that scenario Vista still boots up quickly with superfetch enabled at startup.

But once you start to load lots of programs onto Vista having the Superfetch running at boot up actually slows down the start up process.

Typically the Microsoft Gurus would not have seen this in their tests on their own machines and for that reason they did not pay much attention to the Beta Testers reports because they (Microsoft) would not have been able to duplicate the problem themselves with just a handful of programs running on their Vista's.(And I know there was quite a few Beta testers having concerns with Vista's slow start-ups)

Now this tweak has not slowed down anything else on my machine.Nothing is actually disabled, settings have just been changed for the better. Programs still open as fast or maybe even faster than they did before. Overall the performance of all 3 PC's I tested has increased.

I know some of you will dispute this info and that is OK as well, but the facts speak for themselves.

Now go forth and plagiarize

Link to comment
https://www.neowin.net/forum/topic/583150-vista-superfetch/
Share on other sites

Before I turned off superfetch to load programs into my system at start-up, Vista would boot up to my desktop very quickly, but then it would just hang for about 2 minutes while superfetch loaded everything.

I've never experienced anything that could be described as a "hang". My ageing PC allows me to do anything I want whilst Superfetch is working away in the background. :huh:

I have the superfetch enabled and Vista is faster than XP:

the boot is faster than XP;

the desktop is faster to become ready than XP, it's more responsive and so I can start working as the desktop is shown;

the applications are loaded faster than XP

My PC is old: P4 1.7GHz, 768MB RAM, Geforce 6200 AGP 256MB.

Edited by franzon
I have the superfetch enabled and Vista is faster than XP:

the boot is faster than XP;

the desktop is faster to become ready than XP, it's more responsive and so I can start working as the desktop is shown;

the applications are loaded faster than XP

My PC is old: P4 1.7GHz, 768MB RAM, Geforce 6200 AGP 256MB.

same here, my pc boots just as fast as XP, when I first log in prefetch does it's thing for a minute or so but my computer doesn't slow down at all while it's doing it so it doesn't really matter to me. My applications load faster than in XP also.

The things you have to take into account here is that Microsoft would have tested Vista with only a few "if any" programs installed onto their OS's at Redmond, and in that scenario Vista still boots up quickly with superfetch enabled at startup.

But once you start to load lots of programs onto Vista having the Superfetch running at boot up actually slows down the start up process.

Typically the Microsoft Gurus would not have seen this in their tests on their own machines and for that reason they did not pay much attention to the Beta Testers reports because they (Microsoft) would not have been able to duplicate the problem themselves with just a handful of programs running on their Vista's.(And I know there was quite a few Beta testers having concerns with Vista's slow start-ups)

Is this the supposed conclusion? Do you have a source to back up these statements or did you make them up?

It's a trade off. If I disable Superfetch, the minute or so of horrible lag after a reboot is gone, but word, IE, etc. all take longer to load.

Since I so very rarely reboot, it's a no brainer: leave it on.

Not really if you system is on Raid 0 configuration. Then Superfetch has no meaning....

my Vista boot time is definitely slower than XPs was. After the scrolling status bar goes for a few seconds, the screen goes black for around 20 seconds, then the circular windows logo pops up and it finally boots to the desktop.

i'll play around w/ this setting and see if it does anything for me.

Not really if you system is on Raid 0 configuration. Then Superfetch has no meaning....

Not quite. Even the fastest HD/Raid combination in the world still is slower than something precached in memory. Superfetch always provides a benefit, even if you THINK it doesn't.

Not even close to accurate. NO drive array, raid 0 or otherwise, is even close to the speed of the RAM in your system.

drives are an order of magnitude slower.

The thing is that superfetch doesn't load let's say a complete game in a RAM. It does load something, but it has almost no meaning if you run Raid 0 configuration.

With superfetch or without your computer still needs to load the game from hard drive, and that's the point. I'm not sure what is happenning as you add more and more memory. I guess Superfetch loads more 'garbage' from hard drive to Ram.

I run Vista X64 with 4GB and memory usage when the system idles is 39%.

Here is some fact. A lot of CPU and Hard Drive and Ram time are wasted by Superfetch. Why? Well, Superfetch has to load the data from hard drive into RAM, which your computer will do it anyway when you start app/game. The data are not coming from nowhere but from hard drive into RAM, which means hard drive has to spend equal or same amount of time as it Superfetch is disabled. Now you can waste a lot of CPU, Hard Drive, Ram time cause Superfetch loads up the thing you're not gonna even maybe use.

I look at Superfetch as software version of hardware solution for this problem, and that's OS in ROM chip which loads up instantly and that's the future.

Edited by red_star
With superfetch or without your computer still needs to load the game from hard drive, and that's the point. I'm not sure what is happenning as you add more and more memory. I guess Superfetch loads more 'garbage' from hard drive to Ram.

YOU WRONG!

Superfetch learns which applications and data should be kept in memory, superfetch assigns a priority to memory's pages.

Without Superfetch, the applications and data are stored in memory in a "flat" way like in Windows XP, they haven't a priority, and so the memory managment is not able to learn what are the best programs and data it should keep in memory, it's not able to learn which programs and data should unload from the memory. Without Superfetch your hard drive activity is increased because the right programs and data are not found in memory, they are unloaded without any intelligent criterion and this means your hard drive has to reload them.

Without Superfetch the programs are loaded and unloaded in a raw way, causing a lot of hard drive activity because you lose the low I/O priority feature for loading/unloading memory's pages.

Edited by franzon
The thing is that superfetch doesn't load let's say a complete game in a RAM. It does load something, but it has almost no meaning if you run Raid 0 configuration.

Again, you are incorrect. No drive, SCSI, SATA, PATA, or Raid array is faster than RAM, and will not be for the foreseeable future. Robson/hybrid drives and solid state drives moves it forward, but still an order of maginitude exists between the speeds.

A decent 7200 RPM PATA drive with Superfetch on a reasonably profiled machine will seem much more responsive than a 15000RPM RAID0 array without Superfetch, until your usage falls well outside the profile.

With superfetch or without your computer still needs to load the game from hard drive, and that's the point.

The point is, if you can have half the game's dlls loaded in precache before you even launch the game, half the loading is already done.

I'm not sure what is happenning as you add more and more memory. I guess Superfetch loads more 'garbage' from hard drive to Ram.

If the programs you run on a daily basis are garbage, then your assumption would be correct.

I run Vista X64 with 4GB and memory usage when the system idles is 39%.

What an incredible waste of RAM.

Most likely they are running a fast enough system already that compensates any slowdowns or sluggishness. So it wouldn't matter if they were running XP, Vista or any other OS because they would most likely not notice any slowdown.

Ok, now on to Superfetch the greatest thing ever, loads apps faster by caching them into memory supposedly. Ok if Superfetch was so magnificent then why is my whole Vista UI completely sluggish and unresponsive? Now supposedly if you run a memory demanding app, close it and open another app, it will load much faster compared to XP or with Superfetch disabled. Even if you're not running any apps at the time it will load things faster compared to XP or with the feature disabled.

Mind you my PC is Vista Premium/Ultimate Ready/Capable, Dual Core AMD64, Graphics card sucks, well sort of low end geforce 6150, however can play Lost Planet: Extreme Condition fine on the absolute lowest settings Albeit significant slowdown in large areas or action on the screen. Should run the Vista UI fine since I can play this without any real slowdowns or sluggishness, right? Well wrong, the Vista UI is extremely sluggish for me even with the performance & reliability packs, taking longer than XP to load anything, browse folders/control panel, sluggish effects. Some programs don't kill properly by the task manager sitting there eating memory. Network connectivity problems, I'll start downloading then wireless signal will cut out crippling the network until I unplug/replug in the router. Many more as well in the way of compatibility, sluggishness/performance problems as well.

Now on to what I've experience using Vista for a while, apps do not load any faster than XP. In fact they are 2x slower than if I did the same thing on XP, completely sluggish to hell. Apps that I load after closing a game, load slower than if If I opened them before using any other programs/games.

Sorry, but this is a joke to me that I can't believe you fell for it especially since it's coming from Microsoft, a lying, deceptive, greedy, evil monopolistic company which steps over it's customers, squashes the little or middleman (Competition) with it's corporate greed. Threatens bogus lawsuits (Linux) with proclaimed IP infringement without valid proof although they incorporate ideas in their OS from other OS's. When asked to present code to study as a means of aforementioned possible infringement they refuse with closed source or whatever argument they use to avoid possible suits. Incorporating Intrusive DRM/WGA and activation which in the end is a hassle for legit consumers since pirates are happily using their cracked, DRM/Wga, and activation free copies of windows without worries. Is trying to eliminate linux by bogus claims, getting them to jump ship or pay them a royalty like fee for unproven IP infringement. Also they basically treat everyone as a pirate by forcing Wga/Activation and DRM. Also in the past the OS had tons of security flaws, where even browsing the web can get you a nasty Trojan or Virus, the OS that crashes a bit to much. The company that has a poor track record, monopoly lawsuits or lawsuits and much other concerning behavior.

Finally in Vista they are starting to do something right, but it's a Far cry than what they could be doing with the OS if they just listened to the consumer, what they do/don't want (Less Intrusive/No DRM or WGA), No hassle with Activations. People are going to pirate regardless of what schemes are in place and will find a way to avoid it So what's the use?

I'm not bashing Windows, even using Vista/XP myself legally bought in a dual-boot config. I was just trying to say, take anything Microsoft says with a grain of salt due to their past record/history. I thought my Experience with Vista would be WoW, but so far it's been Meh.

Although if my or any Games/Apps had 100% compatibility with Linux, I wouldn't hesitate and would switch completely in a heartbeat. :p

Ignore the consistency or coherency and spelling/grammar of my comment, as it's almost 3am EST here where I live and I'm dead tired.

G'Day and Night. :sleep:

Edited by bmaher
Removed certain phrases.

Xtreme2damax, so you wanna explain to me why my system still runs fast and load everything fast EVEN when my settings are in power saver WHICH UNDER CLOCKS my CPU to 800MHz. My spec are as follows:

Laptop

C2D T7300 2GHz

2GB RAM

Intel X3100 graphics card (3.5 WEI)

200GB HDD

OR Anyone wanna explain WHY MY SYSTEM LOADS APPS FAST and browsing the internet with NO LAG before you guys talk more **** about vista.

Edited by kouhii00
<snip>

has it not occurred to you, that your setup has serious issues? you really think vista performs as badly as that for everyone and we're just lapping it up? please. :rofl:

so your pc is vista certified? complain to your oem. they're the ones at fault here.

just for the record, i'm running vista on a somewhat decrepit old s478 mobo (asus p4c800e dlx). that's 4 years old now. my cpu is a pentium m which is well over 2 years old. single core, 32bit only, 1.7ghz..... vista absolutely flies on it. admittedly i have 2gb of ram. i do concede vista needs this amount to function properly. and i have just the one single sata hard drive. running vista, my pc is much faster than xp for launching applications/browsing folders/everything. even all my games play just fine. admittedly i haven't bought any new games so can't compare but all my old games like hl2/quake4/gta:sa run at the same settings as i could manage in xp.

as for the 2nd half of your post, have one of these -> :laugh:

just for the record, i'm running vista on a somewhat decrepit old s478 mobo (asus p4c800e dlx). that's 4 years old now. my cpu is a pentium m which is well over 2 years old. single core, 32bit only, 1.7ghz..... vista absolutely flies on it. admittedly i have 2gb of ram. i do concede vista needs this amount to function properly.

Actually, I'm running Vista Ultimate on an Asus A7N8X-E Deluxe with an Athlon 2400+ and 1GB RAM, Radeon 9700 Pro with Aero turned on, and it still manages to perform better than XP. I have some complaints about booting up slowly, and stuff like TrustedInstaller suddenly doing some stuff behind my back (on single-core systems this is still an issue), but then I dualboot into XP and it has just these same problems, + more. Anyhow, I just wanted to mention that it runs fine on 1GB RAM too.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • BleachBit 6.0.1 Beta by Razvan Serea When your computer is getting full, BleachBit quickly frees disk space. When your information is only your business, BleachBit guards your privacy. With BleachBit you can free cache, delete cookies, clear Internet history, shred temporary files, delete logs, and discard junk you didn't know was there. Designed for Linux and Windows systems, it wipes clean thousands of applications including Firefox, Microsoft Edge, Google Chrome, Opera, Safari, and more. Beyond simply deleting files, BleachBit includes advanced features such as shredding files to prevent recovery, wiping free disk space to hide traces of files deleted by other applications, and vacuuming Firefox to make it faster. Better than free, BleachBit is open source. BleachBit has many useful features: Delete your private files so completely that "even God can't read them" according to South Carolina Representative Trey Gowdy. Simple operation: read the descriptions, check the boxes you want, click preview, and click delete. Multi-platform: Linux and Windows Free of charge and no money trail Free to share, learn, and modify (open source) No adware, spyware, malware, browser toolbars, or "value-added software" Translated to 64 languages besides American English Shred files to hide their contents and prevent data recovery Shred any file (such as a spreadsheet on your desktop) Overwrite free disk space to hide previously deleted files Portable app for Windows: run without installation Command line interface for scripting and automation CleanerML allows anyone to write a new cleaner using XML Automatically import and update winapp2.ini cleaner files (a separate download) giving Windows users access to 2500+ additional cleaners Frequent software updates with new features Going beyond standard deletion of files, BleachBit has several advanced cleaners: Clear the memory and swap on Linux Delete broken shortcuts on Linux Delete the Firefox URL history without deleting the whole file—with optional shredding Delete Linux localizations: delete languages you don't use. More powerful than localepurge and available on more Linux distributions. Clean APT for Debian, Ubuntu, Kubuntu, Xubuntu, and Linux Mint Find widely-scattered junk such as Thumbs.db and .DS_Store files. Execute yum clean for CentOS, Fedora, and Red Hat to remove cached package data Delete Windows registry keys—often where MRU (most recently used) lists are stored Delete the OpenOffice.org recent documents list without deleting the whole Common.xcu file Overwrite free disk space to hide previously files Vacuum Firefox, Google Chrome, Liferea, Thunderbird, and Yum databases: shrink files without removing data to save space and improve speed Surgically remove private information from .ini and JSON configuration files and SQLite3 databases without deleting the whole file Overwrite data in SQLite3 before deleting it to prevent recovery (optional) BleachBit 6.0.1 Beta release notes: BleachBit 6.0.1 beta is now available for testing. This maintenance-focused release includes bug fixes, updated translations, and a range of safe enhancements. This release fixes a Windows security issue that could allow arbitrary file deletion during privileged cleaning (reported by Zeze with TeamT5). It also adds new cleaners (including a DNS cache cleaner, Claude Code, and Visual Studio Code forks), support for multiple Chrome and Edge profiles, new deep scan options for developer directories like node_modules and venv, and safer, faster file shredding. All Platforms Added cleaners for Claude Code, DNS cache, and many Visual Studio Code forks. Added support for multiple Chrome and Edge profiles. Chrome can now clean downloaded AI models. Deep Scan can optionally remove venv, __pycache__, node_modules, and .angular directories. Deep Scan is faster by skipping directories on the keep list. File shredding is safer, faster, and leaves fewer recoverable traces. Improved handling of cookies, symlinks, Unicode filenames, external processes, and configuration files. Improved Expert Mode warnings and long warning dialogs. Fixed crashes related to cleaner detection, invalid Unicode, and malformed cleaner data. Clipboard is now cleared automatically after shredding files via paste operations. Linux Added AppImage support. Added cleaners for Visual Studio Code, Codeium, Librewolf (.deb), Transmission (Flatpak), and Profanity. Improved Linux trash detection, including Snap-installed applications and mounted drives. Fixed Wayland root CLI issues and several Snap-related problems. Improved package dependencies, AppStream metadata, and desktop file handling. Fixed startup crashes when Python Requests is unavailable. Windows Fixed a security vulnerability that could allow arbitrary file deletion when cleaning with elevated privileges. Added %WindowsSystem% variable support. Improved clipboard clearing using native Windows APIs. Improved installer experience on unsupported Windows versions. Reduced installer size and improved application robustness. Fixed Unicode handling, filename anonymization, Git revision reporting, and splash screen stability. [full release notes] Download: BleachBit 6.0 | Portable | ~20.0 MB (Open Source) View: BleachBit Home page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • DriversCloud 12.1.6 by Razvan Serea With DriversCloud (formerly My-Config.com), you can explore your computer easily, safely and free. The application quickly scans your PC and identifies the hardware and software components. DriversCloud then establishes a list of the different drivers compatible with your OS and hardware. Download the drivers needed for the proper functioning of your computer. To detect your drivers, DriversCloud also displays a detailed summary of your hardware and software configuration, analyzes your BSOD, monitors in real-time your PC voltages and temperatures and lets you share your configuration online. Once the hardware components have been detected, you will be able to obtain with just a few clicks the latest drivers corresponding to the identified hardware. You can record your configuration on the site for free, and can get the corresponding URL to post the configuration to technical forums, e-mail and social networks. You can also download the detection result (the configuration) as a PDF file. To protect the user's privacy and data confidentiality, a 4-level confidentiality system was created that filters the XML marks and gives control to the user. The default level can be modified in the preferences. Using the maximum level will prevent the user from publishing his configuration and generating a corresponding PDF file. In non-connected mode, each XML configuration is stored on the server for one day (for practical reasons). However, you are given the opportunity to manually delete it. Created in 2004, and continually improved, My-Config.com has established itself on the web as a free service to PC users running Windows and Linux operating systems. The service is designed to work with the most common Internet browsers (Edge, Firefox, Chrome, Safari). Download: DriversCloud 64-bit | 20.0 MB (Freeware) Download: DriversCloud 32-bit | 18.9 MB Link: DriversCloud Home Page | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Ocenaudio 3.19.3 by Razvan Serea  Ocenaudio is a full featured, fast and easy to use audio and music editor. It is the ideal software for people who need to edit and analyze audio files without complications. Ocenaudio also has powerful features that will please more advanced users. To assist ocenaudio development, a powerful toolset of audio editing, analysis and manipulation called Ocen Framework was created. ocenaudio is also based on Qt framework, a well known library for cross-platform development. Cross-platform support ocenaudio is available for all major operating systems: Microsoft Windows, Mac OS X and Linux. Native applications are generated for each platform from a common source, in order to achieve excelent performance and seamless integration with the operating system. All versions of ocenaudio have a uniform set of features and the same graphical interface, so the skills you learn in one platform can be used in the others. VST plugins support Ocenaudio supports VST (Virtual Studio Technology) plugins, giving its users access to numerous effects. Like the native effects, VST effects can use real-time preview to aide configuration. Real-time preview of effects Applying effects such as EQ, gain and filtering is an important part of audio editing. However, it is very tricky to get the desired result by adjusting the controls configuration alone: you must listen the processed audio. To ease the configuration of audio effects, ocenaudio has a real time preview feature: you hear the processed signal while adjusting the controls. The effect configuration window also includes a miniature view of the selected audio signal. You can navigate on this miniature view in the same way as you do on the main interface, selecting parts that interest you and listening to the effect result in real time. Multiselection for delicate editions To speed up complex audio files editing, ocenaudio includes multi-selection. With this amazing tool, you can simultaneously select different portions of an audio file and listen, edit or even apply an effect to them. For example, if you want to normalize only the excerpts of an interview where the interviewee is talking, just select them and apply the effect. Eficient edition of large files With ocenaudio, there is no limit to the length or the quantity of the audio files you can edit. Using an advanced memory management system, the application keeps your files open without wasting any of your computer's memory. Even in files several hours long, common editing operations such as copy, cut or paste happen almost instantly. Fully featured spectrogram Besides offering an incredible waveform view of your audio files, ocenaudio has a powerful and complete spectrogram view. In this view, you can analyze the spectral content of your audio signal with maximum clarity. Advanced users will be surprised to find that the spectrogram settings are applied in real time. The display is updated immediately when altering features such as the number of frequency bands, window type and size and dynamic range of the display. Ocenaudio 3.19.3 changelog: Fixes issues with MP4 files with more than 8 channels Fixes incorrect VBR detection for some CBR MP3 files Other bug fixes and improvements Download: Ocenaudio 64-bit | Portable | ~40.0 MB (Freeware) Download: Ocenaudio for Linux and Mac OS View: Ocenaudio Homepage | Screenshot Get alerted to all of our Software updates on Twitter at @NeowinSoftware
  • Recent Achievements

    • Week One Done
      agatameier earned a badge
      Week One Done
    • One Month Later
      agatameier earned a badge
      One Month Later
    • Week One Done
      ssd21345 earned a badge
      Week One Done
    • Contributor
      MarkHughes4096 went up a rank
      Contributor
    • Dedicated
      jordanspringer earned a badge
      Dedicated
  • Popular Contributors

    1. 1
      +primortal
      513
    2. 2
      +Edouard
      185
    3. 3
      PsYcHoKiLLa
      144
    4. 4
      ATLien_0
      95
    5. 5
      Steven P.
      75
  • Tell a friend

    Love Neowin? Tell a friend!