Sony NW-S202F not working in Vista

By Stealthy_Singh
in Hardware Hangout

 Share

Recommended Posts

Proficient

Stealthy_Singh

Posted
Posted

I just got a free Sony NW-S202F with my sony card pulse points. I installed the sonic stage software and tried to transfer music to the player. However the player won't show up on the computer at all, not even in the sonic stage software. I check the sony website apparently sonic stage 4.3 is compatible with Vista. So I duly download and istall ver 4.3 and try to transfer my songs but same problem. I don't have a seperate driver for the player as supposedly it is installed with the software. Also sony don't provide on on their website. Now when I attach my player Vista is asking for a driver as it can't find one on the update site. I don't have one to give it. I tried installing it direct from the CD but apparently it can't be installed this way, something about an entry of somesort is missing.

Anyone have any ideas what I could do? This is all very annoying.

Link to comment
https://www.neowin.net/forum/topic/586442-sony-nw-s202f-not-working-in-vista/
Share on other sites
Mentor

RatherLargeBear

Posted
Posted

1. Click Start, and then right-click My Computer and select Manage.

The Computer Management window for the local computer is displayed. "Computer Management (Local)" is displayed at the root of the console tree.

2. In the console tree, expand Storage and click on Disk Management

3. Right-click on the volume icon next to the partition or logical drive that corresponds to the walkman and click Change Drive Letter and Paths….

If you have several volumes and you don't know which one corresponds with your walkman, you can find out the correct volume by briefly disconnecting and then reconnecting your walkman from the USB port to notice which volume is affected by this operation (it will disappear when the walkman is disconnected and reappear when the walkman is reconnected).

4. Do one of the following:

* If there is no drive letter assigned, click Add, select thedrive letter you want to use, and then click OK.

* To modify the currently assigned drive letter, click the drive letter, click Change, select the drive letter you want to use, and then click OK.

Note: when modifying drive letters, you may get one of the following warnings:

1. “Drive Letter is already mapped to a network share or a local path. In order to see the volume after the operation, you must remove the current mapping

2. “Changing the drive letter might cause programs no longer to run.”

In case you get the first warning message (1.) than please click on NO and select a different drive letter. If you get the second warning message (2.) then just click on YES to confirm.

Hope that helps you.

Proficient

Stealthy_Singh

Posted
  • Author
Posted

^ Thanks RatherLargeBear. I tried that before Like I said the computer doesn't even recognise that something is connected. It doesn't show up in disk management. It won't show up on the remove hardware in the system tray either. The only indication that it is connected is the system sound you get on connecting a device and dissconnecting it, the player is charging from the USB but no data seems to be passing through. It's not the USB ports that are the problem as they work with other devices.

Any other ideas I could try please?

Mentor

RatherLargeBear

Posted
Posted

ok leave it unplugged for now.

I would suggest you un-install Sonic Stage, then re-install. And restart the PC.

Then reconnect the player.

Try a different USB port if possible, make sure its not connected to a hub.

This topic is now closed to further replies.
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Posts

    • Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise

      By Karthik Mudaliar · Posted

      Microsoft's fast coding model MAI-Code-1-Flash comes to Copilot Business and Enterprise by Karthik Mudaliar Microsoft’s recently announced MAI-Code-1-Flash model is now generally available to GitHub Copilot Business and Copilot Enterprise customers. With this support, organizations can have more centralized policy controls and billing while finally being able to use Microsoft’s lightweight, first-party coding model. According to GitHub’s announcement, Business and Enterprise plan administrators must enable the MAI-Code-1-Flash policy in Copilot settings before developers can access the model. Microsoft says that MAI-Code-1-Flash is for fast, iterative coding work rather than the most demanding architectural or debugging tasks. GitHub’s official model comparison page says that the model is great for "general-purpose coding and writing," while it excels at fast, accurate code completions and explanations Microsoft introduced MAI-Code-1-Flash on June 2 as part of a broader collection of internally developed MAI models. GitHub subsequently expanded support to Copilot CLI, the Copilot cloud agent, GitHub.com chat, GitHub Mobile, Visual Studio, JetBrains IDEs, Eclipse, and Xcode, but said support for managed Business and Enterprise customers was still on the way. In Microsoft’s own benchmark testing, MAI-Code-1-Flash scored 51.2% on SWE-Bench Pro, compared with 35.2% for Anthropic’s Claude Haiku 4.5. Microsoft also claimed that the model used up to 60% fewer tokens on SWE-Bench Verified. Do note that these are vendor-run results rather than independent measurements. The model is billed at provider list pricing under GitHub’s usage-based system. GitHub currently lists MAI-Code-1-Flash at $0.75 per million input tokens, $0.075 per million cached input tokens, and $4.50 per million output tokens. For organizations, the main incentive to use MAI-Code-1-Flash is likely to be efficiency rather than maximum capability. A smaller model that responds quickly and limits unnecessary output is quite useful for repetitive agent tasks at scale, especially after GitHub Copilot’s move toward usage-based billing. The "Flash" model is recommended for fast work and not necessarily for huge repositories with loads of context. It's better if teams compare their output with other larger models, especially if they're working on security-sensitive changes and complex, multi-file work.
    • I restored the default settings to Secure Boot. Big mistake

      By erpster3 · Posted

      yes AND no the "original" or plain/normal Optiplex 7010 won't be getting any more new firmware updates BUT the Optiplex SFF/SFF Plus {small form factor}, Micro/Micro Plus & Tower/Tower Plus 7010 editions DO get new updates such as this new one   and here are similar guides from the Dell web site for Dell systems: https://www.dell.com/support/kbdoc/en-us/000390990/secure-boot-transition-faq https://www.dell.com/support/kbdoc/en-us/000347876/microsoft-2011-secure-boot-certificate-expiration
    • SpaceX reportedly plans a Starlink mobile service for U.S. consumers

      By neufuse · Posted

      AT&T has been spying on US citizens with the NSA for decades.. they just know how to keep it more under wraps.. the evil level is still there.
    • Politically funny images of the World

      By SidVicious · Posted

    • Windows 11 is getting redesigned taskbar settings in new build

      By excalpius · Posted

      >Improved system sounds when using Windows in dark mode. The story behind that bug would be an interesting one.

  • Recent Achievements

    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
    • Week One Done
      tuben earned a badge
      Week One Done
    • First Post
      OffsetAbs earned a badge
      First Post
    • Reacting Well
      OffsetAbs earned a badge
      Reacting Well

  • Popular Contributors

    1. 1
      +primortal
      443
    2. 2
      +Edouard
      200
    3. 3
      PsYcHoKiLLa
      155
    4. 4
      FloatingFatMan
      71
    5. 5
      Steven P.
      66
    Show More

  • Tell a friend

    Love Neowin? Tell a friend!