Why do people bid so early on ebay?


Recommended Posts

Why do people bid so early on ebay? I'm looking at an item that ends in a couple days and people are already having a bidding war on it. Are these people just bidding early in case they forget to bid later or do they just bid early to scare off other bidders. To me, it would be smart to only bid within minutes before the auction closes.

Link to comment
https://www.neowin.net/forum/topic/587154-why-do-people-bid-so-early-on-ebay/
Share on other sites

I always do this for some reason. I just don't want to end up paying a lot of money thats why I don't wait. But I always get outbid. W.e if you can find what you want for cheap then, you gotta bid for it, and if someone outbids you, ebay always emails you.

Those people might be like me, work + college = does not give you the right time you need to baby an auction

that would be rational if you weren't engaging in a bidding war. ebay accepts a bid and will incrementally increase the bid until it reaches the ceiling you specify. in this sense, if you won't be around when the auction ends, you should put in your valuation and then hope for the best. if your valuation is the highest at this point, the price will go up only incrementally; and if your valuation isn't the highest, you would have lost anyway.

now, a bidding war (by the same people) suggests that people are putting in successive bids, which is irrational. there's no reason to not put in your real valuation.

clearly, sniping (bidding at the last minute) is the best solution. you will do at least as well by bidding at the last minute as bidding at some other time. numerous economic papers have demonstrated that sniping is the optimal strategy.

as for the argument about scaring off other bidders, i don't think that's right. let's say you have a valuation v1 and another bidder has a valuation v2 (unknown to you). if you bid early, the price, p, will go up. however, if p < v2, bidder 2 isn't going to be scared off (unless there are lots of substitutes, but let's ignore this). he'll submit a bid of v2 at some point (maybe at the end) and you'll have to pay at least v2. but if p > v2, bidder 2 will be scared off, but since your valuation is higher than v2 (since you bumped the price up to p), you would have won in the end anyway. there's no point to bidding early.

more importantly, waiting until the end allows you to take advantage of the fact that not all bids will be received by the time the auction ends. hence, there will be some probability that your bid will be the highest by the end of the auction, even if it isn't necessarily the highest of all the potential bids.

gotta start sometime right?

if you wait till the last minute it'll just give more time for tons of people to become interested in the item, increasing the competition

people have a set limit of what they're gana spend, doesn't matter if it goes up to that limit quickly or slowly.

This is how eBay works:

You see an item you want, and bid the maximum you're willing to pay for it. If you are willing to pay the most, you get the item, if not, you don't.

It shouldn't matter when you bid, as long as you bid the maximum you're willing to pay.

gotta start sometime right?

if you wait till the last minute it'll just give more time for tons of people to become interested in the item, increasing the competition

people have a set limit of what they're gana spend, doesn't matter if it goes up to that limit quickly or slowly.

This is how eBay works:

You see an item you want, and bid the maximum you're willing to pay for it. If you are willing to pay the most, you get the item, if not, you don't.

It shouldn't matter when you bid, as long as you bid the maximum you're willing to pay.

that is incorrect. people do have a set limit. but waiting increases the chances of SAVING MORE.

think about it this way. if people bid early on, the price goes up immediately and with certainty. if people waited until the last minute, the price might go up just as much or it might not (e.g., some bids don't make it in time). but the second case will be at least as good as the first. why? if we have the same people bidding, the final price in the second case will be no higher than in the first, and it could be lower. where the final price is the same in the two cases, as a bidder, you should be indifferent between bidding early and bidding at the last minute. but if the final price is lower, you should bid at the last minute to save money.

given these two cases, bidding at the last minute is at least as good as bidding early (and better in some cases).

this is actually a popular topic in game theory. there are many papers on it, e.g., one by roth and ockenfels. just google 'ebay sniping' or 'ebay sniping game theory'.

I never understood it either, I mean what possible purpose does it serve to bid early besides the fact that the price gets pushed up?

Please explain me the difference:

1. Over a period of 7 days, 10 people people place in bids, thus driving up the price gradually.

2. Over a period of 7 days, nobody places a bid until the last 5mins where there are 10 people bidding against each other causing the price to go up.

There's absolutely no difference.

If you have a certain amount to spend and don't wish to purchase the item beyond that price, whether you bid on day 1 or 10 seconds left, it's the same thing. If you lose, so be it. It's out of the bidder's price range. That's how a lot of people look at auctions.

If you want to bid last minute, all you're doing is delaying the inevitable until the very last moment. The auction price might seem cheaper for the first 6days, 23hrs and 45mins of the auction, but the final price is most probably the same. and what's worse is that you might end up spending more than you wish, or more than that item is worth because you have engaged in a full out bidding war.

I've had cases where I was the seller, and there was virtually no interest in the item I was selling until the last 30mins where a cd for 9.99 sold for over $120.

I just bid early at the lowest available price so other people have less incentive to bid in that auction. If someone enters, I'd test out the waters first, see if he has a high 'highest bid', if so, I usually tend to bid in the end 10 minutes with my highest bid, if it extends beyond what I can afford, I usually let it go, unless it's a rare item.

I used to bid early on when i frst joined ebay.

Then i quickly realised i wasnt going to get that brand new sony laptop for 0.99p :p

Now when bidding, I have a system that lets me bid in the last 10 seconds, no sniping program needed ;)

Please explain me the difference:

1. Over a period of 7 days, 10 people people place in bids, thus driving up the price gradually.

2. Over a period of 7 days, nobody places a bid until the last 5mins where there are 10 people bidding against each other causing the price to go up.

There's absolutely no difference.

If you have a certain amount to spend and don't wish to purchase the item beyond that price, whether you bid on day 1 or 10 seconds left, it's the same thing. If you lose, so be it. It's out of the bidder's price range. That's how a lot of people look at auctions.

If you want to bid last minute, all you're doing is delaying the inevitable until the very last moment. The auction price might seem cheaper for the first 6days, 23hrs and 45mins of the auction, but the final price is most probably the same. and what's worse is that you might end up spending more than you wish, or more than that item is worth because you have engaged in a full out bidding war.

I've had cases where I was the seller, and there was virtually no interest in the item I was selling until the last 30mins where a cd for 9.99 sold for over $120.

i already gave one reason, but there are many others.

here's an article:

On eBay, it pays to snipe

Thank goodness for science. How else would we know the best way to nab those barely-used weed whackers, dumbbells or duck-shape salt shakers on eBay? In a study that gives the lie to the notion that eggheads don't like to eyeball online auctions like normal folks, a study by South Korean physicists confirms via some elaborate mathematical modeling that "sniping" ? waiting for the very last second to submit your bid on that Elvis-shape throw rug ? is indeed "a rational and effective strategy to win in an eBay auction."

Founded in 1995, eBay is the king of online auction sites. Sellers put up items for sale and buyers bid up the price. Thanks to the Internet's lack of state sales tax and the public's thirst for other people's garage sale items, the company has grown into a firm that amassed $4.55 billion in revenue last year. The service sets a deadline on bids for items, which has given rise to the practice of "sniping," bidding at the last minute to deny other bidders time to outbid you.

Savvy buyers have taken to the practice in swarms. Some companies even exist to snipe for ySellers, however, have grumbled that the practice keeps winning bid prices lower than they would be in a more open-ended auction, in which prices may be driven up by competition between buyers. If nobody bids until the last second, it's inevitably just a (relatively) low-bidding person who puts in the highest-price bid and walks away with the item.

To test whether sniping is a smart way to do things or just truncates normal bidding, the South Korean team at Seoul National University produced a "master equation" for how bidding proceeds (it's nk(t+1) ? nk(t) = w(k-1)(t)*n(k-1)(t) ? wk(t)*nk(t) + sigma(k,1)*u(t), if you really want to know), and then tested it against a massive number of auction records, some 264,073 items sold in one day on eBay and another 287,018 items sold in one year by eBay's Korean partner.

Plugging all those data into the model and testing the outcome in terms of how the auctions turned out, the team found that the probability of submitting a winning bid on an item indeed drops with ea"Our analysis explicitly shows that the winning strategy is to bid at the last moment as the first attempt rather than incremental bidding from the start."uot; The study appears in the current Physical Review E journal.

The finding is no surprise to Harvard economist Alvin Roth, who has studied sniping from an economics viewpoint since 2002 with colleague Axel Ockenfels of Germany's University of Cologne. They came to similar conclusions. "I think you might do the most good if you advise bidders to form an opinion of how much they are willing to pay for an item, so that they don't get caught up in a bidding war and pay more than they will be happy with," says Roth, by "But, that being said, if they know what proxy bid they want to submit, it won't hurt them to submit it very near the end (but neither will it help them much, or often ...) So, sniping is a good strategy, for those with the time to do it," he adds.dds.

A statement on the eBay site says: Sniping is part of the eBay experience, and all bids placed before a listing ends are valid ? even if they're placed one second before the listing ends.

BONUS MATERIAL: Dan Vergano's Q&A with Alvin Roth and Axel Ockenfels

1. Do you view sniping as a problem? Some eBay sellers have complained that sniping works to artificially lower auction prices. What is your view?

OSniping can help bidders to get better prices on eBay. eBay. But sellers too can profit from sniping, because the possibility of sniping may attract more bidders. For instance, sniping can lead to more bidding from expertsby bidding late, experts can avoid giving information to others through their own early bids. bids. Sniping can also increase the excitement and entertainment value of bidding, which again attracts more bidderSniping is a feature of the auction that eBay bought into when it chose to have a hard close.close. They must think it adds enough to the auction, in entertainment value, in allowing experts to protect their information, etc. to make up in increased bidders what it loses in lost bids and bidding wars.

2. If your work and this South Korean paper show that sniping is rational and effective, why doesn't everyone use the strategy?

Ockenfels: On eBay, not the last bid but the highest Furthermore, last-minute bids sometimes come in too late, after the close of the auction. So, it can be a perfectly sensible strategy to submit a bid early. In fact, depending on the situation, game theory supports both early and late bidding strategies. However, we are also seeing a lot of non-rational, naive behaviors on markets such as eBay. There is no reason to suppose that everybody always behaves in a rational and effective way. This is especially true for eBay, where many experienced and sophisticated traders interact with many unexperienced, naive bidders.dders.

Roth: EBay isn't an English auction, it is a second price auction with prIf you're a busy guy, you might find it better to put in an early proxy bid, high enough to have a chance of winning.nning. The winning bidder isn't the last bidder, it's the bidder with the highest proxy bid (and the earlier bidder in case So sniped bids only get lower prices when other bidders would have been willing to raise their proxy bids, but don't have the chance. That happens often enough so that sniping is a good strategy for those with the time ....e ....

3. How does this new study's approach strike you compared to the one you published in 2002? My understanding was that it rested on game theory, so I'm just trying to see how you see things.

Ockenfels: We closely intertwine game theoretical, laboratory and field analyses. Taken together, our studies help in understanding how the market microstructure qualitatively influence participants' strategies and overall market performance. The new study looks at bidding phenomena from a very different perspective and thus takes a very different approach. It quantitatively analyzes statistical properties of dynamic bidding patterns on eBay ? without addressing institutional complexities or equilibrium aspects of behavior.

Roth: We take a lot of approaches, empirical, theoretical, experimental. And so we are able to look into the multiple causes of sniping, and how they are influenced by the auction rules (and why, therefore, there's so much less late bidding on other kinds of auctions, for example.) But the big divide between physics and economics is that physicists tend to study processes that don't have any human volition in them. Molecules do what they do without forming opinions about what other molecules do. Sometimes this physics approach can also yield some insights into large markets, where each player is small enough to be inconsequential. And eBay must have looked that way to the authors of this article, since they report that in one day they have data from 264,073 auctions involving 384,058 distinct bidders. On the other hand, when I look at those numbers, what strikes me is that there were fewer than 2 bidders per auction in their data. To put it another way, a lot of auctions in their dataset had only a single bidder. Obviously conclusions about sniping are going to be different in such auctions (and in our analyses we normally exclude them).

4. Do you see a better auction strategy for online auction?

Ockenfels: What is a good bidding or selling strategy in online auctions depends on the context, such as the degree of competition and the available information about the value of the object. However, there is a fast-growing applied literature in economics on auction/market design and bidding strategies. (See Roth: http://kuznets.fas.harvard.edu/~aroth/papers/engineer.pdf.)

Roth: I think you might do the most good if you advise bidders to form an opinion of how much they are willing to pay for an item, so that they don't get caught up in a bidding war and pay more than they will be But, that being said, if they know what proxy bid they want to submit, it won't hurt them to submit it very near the end (but neither will it help them much, or often?) So, sniping is a good strategy, for those with the time to do it. (You can also pay a fee to third party sniping software on the web, like esnipe.com or others ....)hers ....)

5. What do you see as the key point(s) to make to readers about a study like this one? How do the results apply to other auctions?

One of the general lessons that comes out of our research in "economic engineering" is: detailFor instance, our studies demonstrate that replacing eBay's hard close by a soft close, which allows bidders to always respond to late bids, would remove the strategic incentives to snipe and thus substantially affect bidding behavior. behavior. Bidders respond to incentives, and incentives can be strongly affected by the details of the auction rules and algorithms. This is true for all auctions, including, for instance, spectrum, electricity and procurement auctions.

http://www.usatoday.com/tech/science/colum...s-of-ebay_x.htm

and some papers:

http://kuznets.fas.harvard.edu/~aroth/pape...eryshortaer.pdf

http://kuznets.fas.harvard.edu/~aroth/pape....experiment.pdf

http://kuznets.fas.harvard.edu/~aroth/pape...librium.geb.pdf

http://kuznets.fas.harvard.edu/~aroth/papers/eBay.ai.pdf

roth and ockenfels give several reasons why sniping is a good strategy.

Please explain me the difference:

1. Over a period of 7 days, 10 people people place in bids, thus driving up the price gradually.

2. Over a period of 7 days, nobody places a bid until the last 5mins where there are 10 people bidding against each other causing the price to go up.

There's absolutely no difference.

.....

OR

3. Over a period of 7 days, 10 people place in bids, thus driving up the price gradually and then in the last 5mins there are 10 people bidding against each other causing the price to go up even more.

Often there will be many people on there with no limit or a higher limit. And you want to get that item for that price. You still want the best chance of getting the item. It's competition. By bidding earlier on you are putting the price up earlier on, meaning that there is more time for it to get even higher.

From my point of view, if something went over my limit early on, I might re-evaluate my budget and make a higher bid beacuse I want the product. If it was the last few minutes I wouldn't have the time to consider if I can afford it.

This topic is now closed to further replies.
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Posts

    • Onkyo Dolby Atmos AV receivers are really solid deals by Sayan Sen Recently we covered great deals on several soundbar models from the likes of Sony, JBL, Samsung and others for really good prices (the lowest in several months). Aside from that we also reported on the Edifier S3000MKII, a hi-fi two-way bookshelf monitor that's available for only $800. Today we bring a list of AV receivers from Onkyo that are available at great prices including the Onkyo NR7100, RZ30, and 8470 (purchase links under the specs table down below). The Onkyo TX-NR7100 and Onkyo TX-RZ30 are both 9.2-channel AV receivers designed for immersive home theater setups but they occupy slightly different tiers within Onkyo’s lineup with the RZ30 positioned as the more advanced model. The TX-NR7100 is a THX Certified 9.2-channel receiver offering up to 100 W per channel (8 ohms, 2 channels driven). It supports Dolby Atmos, DTS:X, and IMAX Enhanced formats, with flexible configurations such as 5.1.4 or 7.1.2 speaker layouts. A key highlight is its built-in Dirac Live Room Correction which should help optimize sound based on your room and its acoustics. In comparison, both models share several core capabilities though the RZ30 is geared toward enthusiasts seeking more precise calibration and system flexibility, while the NR7100 is positioned as a slightly more accessible, value-focused option with strong all-round performance. The technical specs of the RZ30 and NR7100 9.2 AVRs are given in the table below: Specification Onkyo TX-RZ30 Onkyo TX-NR7100 Power Output (FTC, 2ch driven) ~100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) 100 W/ch (8Ω, 20Hz–20kHz, 0.08% THD) Dynamic / Peak Power 9 × 170 W (6Ω, 1kHz, 1% THD, 1ch driven) 220 W/ch (6Ω, 1kHz, 10% THD, 1ch driven) Frequency Response 5 Hz – 100 kHz (+1/-3 dB) 10 Hz – 100 kHz (+1/-3 dB) THD 0.08% 0.08% Room Correction Dirac Live (full bandwidth) Dirac Live (with AccuReflex support) Immersive Audio Dolby Atmos, DTS:X, IMAX Enhanced Dolby Atmos, DTS:X, IMAX Enhanced Speaker Layout Support Up to 7.2.2 / 5.2.4 / 9.2 processing Up to 7.2.4 / 5.2.4 / 9.2 processing HDMI Inputs / Outputs 6 inputs / 2 outputs (eARC) 6 inputs / 2 outputs (Main + Sub/Zone 2) HDMI 2.1 Support 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC 8K/60, 4K/120, VRR, ALLM, QFT, DSC, eARC Video Formats HDR10+, Dolby Vision, HDCP 2.3 HDR10+, Dolby Vision, HDCP 2.3 Streaming / Network Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Wi-Fi, AirPlay 2, Chromecast, Bluetooth, DTS Play-Fi Get them at the links below: Onkyo TX-RZ30 9.2-Channel AV Receiver: $797.00 (Sold and shipped by Electronic Expo) Onkyo TX-NR7100 9.2-Channel AV Receiver: $699.00 (Sold and shipped by Adorma) Onkyo TX-8470 2 Ch Stereo Receiver: $449.00 (Sold and Shipped by Adorma) Good to know This Amazon deal is U.S. specific, and not available in other regions unless specified. We only use first-party seller links or authorized dealer links (at the time of article publishing); ensure that you purchase from such links only. Check out Today's Deals on Amazon | or our recent tech deals. Become a Prime member (for Students or SNAP) via Neowin Get Prime Access - Prime for half price (for qualifying Medicaid, EBT, SNAP) Subscribe to Prime Video, Audible Plus, Music Unlimited or Kindle Unlimited via Neowin As an Amazon Associate, we earn from qualifying purchases.
    • A different thing with Russia. When you say is it better, depends on things. It is better that we don't have the E.U making rules and laws that have nothing to do with them. Is the trading part better? No, that is really mucked up, but then we knew that was going to happen and we would have make agreements, like we do with other parts of the world. Freedom of movement is certainly better, but could be improved, we still need more control over our borders. do you live in the U.K?
    • So what am I quoting from them? I never listened to what Farage or his cronies said. I wanted the U.K to leave the E.u years before the referendum and it had nothing to do with Farage and his cronies. So what country do you live in? Did we work much better together? We were always at logger heads with the E.U because we disagreed with them so much. Maggie was always on at them. I would have thought the E.U was glad to get rid of us as we stopped the integration or made it a two tier. Now without us they can integrate more. I would not have voted out if it was just a trading block and we can still work together on somethings.
    • MPC-BE 1.9.0 by Razvan Serea Media Player Classic - BE is a free and open source audio and video player for Windows. Media Player Classic - BE is based on the original "Media Player Classic" project (Gabest) and "Media Player Classic Home Cinema" project (Casimir666), contains additional features and bug fixes. The BE mod (Black Edition Mod) is a skinned version of Media Player Classic Home Cinema, much better looking than the plain old MPC. MPC-BE 1.9.0 changelog: Splitters Fixed crashes in some situations. AudioSplitter Added support for the RF64 format. Fixed reading of channel layout for some WavPack files. Added support for ID3 tags for Wave64 files. Unknown Wave64 chunks are now ignored. AviSplitter Added support for 'y408' video. Improved support for 'HEVC' video. FLVSplitter Added support for VVC video. MP4Splitter Improved handling of corrupted files. MatroskaSplitter Expanded support for V_UNCOMPRESSED video codecs. Fixed support for frame rotation (ProjectionPoseRoll). Improved support for "V_MS/VFW/FOURCC / HEVC". MpcDvdVideoDecoder Fixed conversion to YUY2. Fixed display of menus for some DVD-Videos. RoQVideoDecoder Output in NV12 and YV12 formats is allowed. Full range is used. MPC Video Decoder RGB32 format will be output as a top-down bitmap by default. Added support for the "IID_MediaSideDataDOVIMetadataV2" interface. Removed support for the deprecated "IID_MediaSideDataDOVIMetadata" interface. Fixed retrieving the name of the video adapter when using NVDEC. Fixed crashes in some situations. MPC Video Converter Added support for AYUV video format. MpcAudioRenderer Improved input format validation. Optimized retrieval of supported formats for exclusive mode. Added the "Keep audio device active when paused" setting. Fixed crashes and freezes in various situations. Subtitles Added the ability to open the properties of an external subtitle renderer in the "Subtitles" settings panel. Fixed external subtitle connections for VSFilter. Fixed a crash when rendering PGS/SUP subtitles when using AVX2. YouTube Improved support for yt-dlp. The built-in YouTube parser is no longer used. Player The HTTP read strategy has been changed. If the playlist contains one entry, more key combinations can be used to control the player (jump through chapters, adjust volume). Improved support for reading ASX playlists. The translation of the MediaInfo report for Chinese, Korean and Japanese has been removed. Added blocking of 32-bit filter "PICVideo Lossless JPEG Decompressor" (pvljpg20.dll), because it crashes. Added blocking of the system filter "AVI Decompressor", which will eliminate the crash of VFW codecs. Fixed a rare crash when using the "/slave" key. Fixed a crash when getting a list of fonts for OSD. Added the ability to load an external audio file using hotkeys. Fixed opening a network path starting with \?\UNC. The "Determine duration when adding" playlist setting now works for YouTube video URLs. The "Online media services" settings panel has been redesigned. Added a "Merge files using FFmpeg" option to the file saving dialog. This option is activated when playing multiple streams obtained using yt-dlp. Added loading of local .dpl playlists ("DAUMPLAYLIST"). Fixed a hang when the user closes the player during the URL opening process. Various interface fixes. Installer Updated MPC Video Renderer 0.10.5. Updated MPC Script Source 0.2.17. Added MPC Image Source 0.3.6. Translations Updated Japanese translation (by tsubasanouta). Updated Chinese (Traditional) and Dutch translation (by beter). Updated Romanian translation (by Andrei Miloiu). Updated Hungarian translation (by mickey). Updated Turkish translation (by cmhrky). Updated German translation (by Klaus1189). Updated Chinese (Simplified) translation (by wushantao). Updated Italian translation (by mapi68). Updated Korean translation (by Hackjjang). Updated Chinese (Traditional) (by udfbe). Updated libraries dav1d 1.5.3-6-g04b69f9; ffmpeg n8.2-dev-1857-g4653e68aab; libpng git-v1.6.55-9-g7d52a8087; Little-CMS git-lcms2.18-26-gf739cda; MediaInfo git-v26.05-38-g702c9b7fd; ZenLib git-v0.4.41-91-g073f297; zlib 1.3.2. Download: MPC-BE 64-bit | Portable MPC-BE 64-bit | ~20.0 MB (Open Source) Download: MPC-BE 32-bit | Portable MPC-BE 32-bit Link: Media Player Classic - BE Home Page Get alerted to all of our Software updates on Twitter at @NeowinSoftware
    • Apple reportedly looks to blacklisted Chinese memory chips as RAM prices climb by Karthik Mudaliar Image via Apple Apple is reportedly trying to get a clearance from the Trump administration to buy memory from ChangXin Memory Technologies (CXMT) to get some relief from soaring DRAM prices. As per a report by the Financial Times, Apple approached the Commerce Department more than a month ago and also spoke to other officials and allies in Washington. For starters, CXMT is a company that's already been placed on the Pentagon's list of Chinese military companies. The Chinese company is the country's top DRAM maker. For Apple, the timing is certainly awkward but not surprising. Tim Cook had recently warned that Apple would have to raise prices because AI companies are buying up large amounts of memory for data centers, and just like that, Apple raised MacBook and iPad prices. Micron also recently revealed that customers have committed billions of dollars to secure memory supply years in advance, which shows us how aggressive securing infrastructure has become. This gives suppliers such as Samsung, SK Hynix, and Micron more leverage, while pushing hardware makers to look for alternatives. CXMT is one of those alternatives, but not the simplest one. Apple has spent many years trying to diversify parts of its supply chain away from China, especially for final assembly, while still depending heavily on Chinese manufacturing and suppliers. Even domestic brands from China are moving towards CXMT and YMTC instead of relying on Samsung, Micron, and SK Hynix. For Apple, though, it would invite more scrutiny than local Chinese companies. For now, this is more like a lobbying effort rather than a confirmed supply deal. There's no official statement from either of the parties. What is clearer, though, is the pressure behind such a request. AI demand has certainly made hardware a bottleneck, and companies are trying everything they can to bring things back to normal, even if that means making politically sensitive choices. Source: Financial Times
  • Recent Achievements

    • Week One Done
      flexorcist earned a badge
      Week One Done
    • One Month Later
      Woland13 earned a badge
      One Month Later
    • Week One Done
      Woland13 earned a badge
      Week One Done
    • One Year In
      bernmeister earned a badge
      One Year In
    • Week One Done
      Scoobystu earned a badge
      Week One Done
  • Popular Contributors

    1. 1
      +primortal
      498
    2. 2
      +Edouard
      227
    3. 3
      PsYcHoKiLLa
      149
    4. 4
      Steven P.
      75
    5. 5
      FloatingFatMan
      70
  • Tell a friend

    Love Neowin? Tell a friend!